48 Airworthiness Directives: 33 airplane, 9 rotorcraft, 5 engine, 1 propeller.
AD 2008-11-10 · published Jul 1, 2008, effective Aug 5, 2008
Viking Air Limited Models DHC-6-1, DHC-6-100, DHC-6-200, and DHC-6-300 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-13-11 · published Jul 1, 2008, effective Aug 5, 2008
Viking Air Limited Models DHC-6-1, DHC-6-100, DHC-6-200, and DHC-6-300 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-13-08 · published Jul 2, 2008, effective Aug 6, 2008
Bombardier Model DHC-8-400 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-13-17 · published Jul 2, 2008, effective Aug 6, 2008
Hawker Beechcraft Corporation (Type Certificates No. 3A15, No. 3A16, No. A23CE, and No. A30CE Previously Held by Raytheon Aircraft Company) F33 Series and Models G33, V35B, A36, A36TC, B36TC, 95-B55, D55, E55, A56TC, 58, 58P, 58TC, G58, and 77 Airplanes
The FAA adopts a new airworthiness directive (AD) for certain Hawker Beechcraft Corporation F33 series and Models G33, V35B, A36, A36TC, B36TC, 95-B55, D55, E55, A56TC, 58, 58P, 58TC, G58, and 77 airplanes. This AD requires you to replace certain circuit breaker toggle switches with improved design circuit breaker toggle switches. This AD results from reports of certain circuit breaker toggle switches used in various electrical systems throughout the affected airplanes overheating. We are issuing this AD to prevent failure of the circuit breaker toggle switch, which could result in smoke in the cockpit and the inability to turn off the switch.
AD 2008-13-19 · published Jul 2, 2008, effective Aug 6, 2008
ATR Model ATR42-200, -300, -320, -500 Airplanes; and Model ATR72-101, -201, -102, -202, -211, -212, and -212A Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-13-20 · published Jul 2, 2008, effective Aug 6, 2008
Boeing Model 757 Airplanes Equipped With Rolls Royce RB211-535E Engines
We are adopting a new airworthiness directive (AD) for certain Boeing Model 757 airplanes equipped with Rolls Royce RB211-535E engines. This AD requires repetitive inspections for signs of damage of the aft hinge fittings and attachment bolts of the thrust reversers, and related investigative and corrective actions if necessary. This AD results from reports of several incidents of bolt failure at the aft hinge fittings of the thrust reversers due to, among other things, high operational loads. We are issuing this AD to prevent failure of the attachment bolts and consequent separation of a thrust reverser from the airplane during flight, which could result in structural damage to the airplane.
AD 2008-13-21 · published Jul 2, 2008, effective Aug 6, 2008
Boeing Model 767-200, -300, and -400ER Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 767-200, -300, and -400ER series airplanes. This AD requires an inspection to determine the manufacturer and manufacture date of the oxygen masks in the passenger service units and the flight attendant and lavatory oxygen boxes, as applicable. This AD also requires related investigative/corrective actions if necessary. This AD results from a report that several passenger masks with broken in-line flow indicators were found following a mask deployment. We are issuing this AD to prevent the in-line flow indicators of the passenger oxygen masks from fracturing and separating, which could inhibit oxygen flow to the masks and consequently result in exposure of the passengers and cabin attendants to hypoxia following a depressurization event.
AD 2008-13-22 · published Jul 2, 2008, effective Aug 6, 2008
Boeing Model 747-400, 747-400D, and 747-400F Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 747-400, 747-400D, and 747-400F series airplanes. This AD requires replacement of an electronic flight instrument system/ engine indicating and crew alerting system (EFIS/EICAS) interface unit (EIU) located on the E2-6 shelf of the main equipment center with a new or modified EIU. This AD results from two instances where all six integrated display units (IDUs) on the flight deck panels went blank in flight. We are issuing this AD to prevent loss of the IDUs due to failure of all three EIUs, which could result in the inability of the flightcrew to maintain safe flight and landing of the airplane.
AD 2008-13-23 · published Jul 2, 2008, effective Aug 6, 2008
Dornier Model 328-100 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-14-10 · published Jul 7, 2008, effective Jul 22, 2008
Lockheed Model 382, 382B, 382E, 382F, 382G, and 382J Series Airplanes
We are adopting a new airworthiness directive (AD) for all Lockheed Model 382, 382B, 382E, 382F, 382G, and 382J series airplanes. This AD requires, among other actions, an inspection to determine whether a certain upper engine mount bolt is installed, and replacement of any discrepant upper engine mount bolt with a new one. This AD results from a report indicating that several upper engine mount bolts manufactured by a certain supplier broke during installation. We are issuing this AD to prevent failure of the upper engine mount bolts, which could result in reduced structural capability of an engine mount, and possible separation of a strut and engine from the airplane during flight.
AD 2008-13-12 · published Jul 8, 2008, effective Aug 12, 2008
Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD requires various repetitive inspections for cracking of the upper frame to side frame splice of the fuselage, and other specified and corrective actions if necessary. This AD also provides for an optional preventive modification, which terminates the repetitive inspections. This AD results from a report that the upper frame of the fuselage was severed between stringers S-13L and S-14L at station 747, and the adjacent frame at station 767 had a 1.3-inch-long crack at the same stringer location. We are issuing this AD to detect and correct fatigue cracking of the upper frame to side frame splice of the fuselage, which could result in reduced structural integrity of the frame and adjacent lap joint. This reduced structural integrity can increase loading in the fuselage skin, which will accelerate skin crack growth and result in decompression of the airplane.
AD 2008-13-13 · published Jul 8, 2008, effective Aug 12, 2008
Airbus Model A330 Airplanes and Model A340-200 and -300 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A330 airplanes and Model A340-200 and -300 series airplanes. This AD requires revising the airplane flight manual (AFM) to prohibit the flightcrew from performing CAT 2 and CAT 3 automatic landings and roll-outs at certain airports. This AD also provides an optional terminating action for the AFM revision. This AD results from data showing that the magnetic variation table installed in certain Honeywell and Northrop Grumman air data inertial reference units (ADIRUs) is obsolete at certain airports. We are issuing this AD to prevent the airplane from departing the runway during a CAT 2 or CAT 3 automatic landing or roll-out, due to differences between actual magnetic variation and the values in the ADIRU magnetic variation tables.
AD 2008-13-24 · published Jul 8, 2008, effective Aug 12, 2008
ATR Model ATR42 Airplanes and Model ATR72-101, -102, -201, -202, -211, and -212 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-13-25 · published Jul 8, 2008, effective Aug 12, 2008
Boeing Model 737-300 and -400 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-300 and -400 series airplanes. This AD requires testing and inspecting a certain web panel of the main wheel well pressure deck to determine the material type and thickness; and related investigative and corrective actions if necessary. This AD results from several reports indicating that cracks ranging from 0.8 to 8.0 inches long were found on a certain web panel of the main wheel well pressure deck. We are issuing this AD to prevent fatigue cracking in the web panel of the main wheel well pressure deck, which could result in venting and consequent decompression of the airplane.
AD 2008-13-26 · published Jul 8, 2008, effective Aug 12, 2008
Lockheed Model 1329 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Lockheed Model 1329 series airplanes. This AD requires determining the part number on the steering cylinder assembly for the nose landing gear (NLG), determining the total flight cycles accumulated on the NLG steering cylinder assembly, repetitively replacing the assembly, inspecting for missing tow turning limit markings, and performing corrective actions if necessary. This AD results from reports of numerous failures of the NLG steering cylinder. We are issuing this AD to prevent the loss of hydraulic pressure and steering control.
AD 2008-13-29 · published Jul 8, 2008, effective Aug 12, 2008
McDonnell Douglas Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 Airplanes
We are adopting a new airworthiness directive (AD) for all McDonnell Douglas Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD- 83), DC-9-87 (MD-87), and MD-88 airplanes. This AD requires repetitive inspections for cracking of the overwing frames from stations 845 to 905 (MD-87 stations 731 to 791), left and right sides, and corrective actions if necessary. This AD results from reports of cracked overwing frames. We are issuing this AD to detect and correct such cracking, which could sever the frame, increase the loading of adjacent frames, and result in damage to adjacent structure and loss of overall structural integrity of the airplane.
AD 2008-13-30 · published Jul 8, 2008, effective Aug 12, 2008
Gulfstream Aerospace LP Model Astra SPX, 1125 Westwind Astra, and Gulfstream 100 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-13-31 · published Jul 8, 2008, effective Aug 12, 2008
Dassault Model Falcon 2000 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-13-32 · published Jul 8, 2008, effective Aug 12, 2008
APEX Aircraft Model CAP 10B Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-14-11 · published Jul 8, 2008, effective Jul 23, 2008
Boeing Model 777-200, -200LR, -300, and -300ER Series Airplanes Approved for Extended-Range Twin-Engine Operational Performance Standards (ETOPS)
We are adopting a new airworthiness directive (AD) for certain Boeing Model 777-200, -200LR, -300, and -300ER series airplanes. This AD requires a one-time inspection to determine the part number of the cargo compartment fire suppression filter/regulator. This AD also requires, for certain airplanes, a revision of the "Maximum Diversion Time in Minutes" for ETOPS operation specified in the Operations Specifications. For certain airplanes, this AD also provides for optional replacement of the cargo compartment fire suppression filter/ regulator, which would allow revision of the "Maximum Diversion Time in Minutes" for ETOPS operation specified in the Operations Specifications to restore the airplane's full ETOPS capability. This AD results from a report that the filter/regulator installed in the cargo fire suppression system did not meter the Halon for the certified duration during ETOPS flight tests. We are issuing this AD to prevent ETOPS operation with insufficient cargo fire suppression capability, which could result in an uncontained fire in the cargo compartment.
AD 2008-14-08 · published Jul 10, 2008, effective Aug 14, 2008
Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP Series Airplanes
We are adopting a new airworthiness directive (AD) for all Boeing Model 747 airplanes listed above. This AD requires repetitive inspections for broken or missing fasteners in the single-row hinge fasteners of the forward and aft cargo doors, and related investigative/corrective actions. This AD results from reports of broken and missing fasteners in the hinges of the forward and aft cargo doors in both the body hinge segments and the door hinge segments. We are issuing this AD to detect and correct broken or missing fasteners in the hinge segments with a single fastener row, which could lead to opening of the cargo door during flight and result in rapid decompression of the airplane.
AD 2008-14-09 · published Jul 10, 2008, effective Aug 14, 2008
Airbus Model A300 and A300-600 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-14-13 · published Jul 10, 2008, effective Aug 14, 2008
Cirrus Design Corporation Model SR20 and SR22 Airplanes
We are adopting a new airworthiness directive (AD) for certain Cirrus Design Corporation (CDC) Models SR20 and SR22 airplanes. This AD requires you to replace the cabin door rod ends with new parts including a redesigned non-binding hinge pin that replaces the existing pin at the upper door hinge. This AD results from two known occurrences of in-flight cabin door separation (one total separation and one retained by the door strut). The rod ends, a component of the door hinges, may fail and result in a door separation from the airplane while in flight. We are issuing this AD to prevent in-flight failure of the cabin door, which could result in door separation from the airplane.
AD 2008-13-01 · published Jul 17, 2008, effective Aug 1, 2008
Fokker Model F27 Mark 050 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-14-12 · published Jul 17, 2008, effective Aug 21, 2008
Pacific Aerospace Limited Model FU-24 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-14-14 · published Jul 17, 2008, effective Aug 21, 2008
Boeing Model 747-400 and 747-400D Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 747-400 and 747-400D series airplanes. This AD requires a general visual inspection of the power feeder wire bundle of the auxiliary power unit (APU) where it crosses the hydraulic system 4 return tube to determine if parts are installed to provide separation between the wire bundle and hydraulic tube. This AD also requires related investigative and corrective actions if necessary. This AD results from a report that the power feeder wire bundle of the APU was found touching the hydraulic system return tube during inspection of an airplane. We are issuing this AD to prevent insufficient clearance between the wire bundle and hydraulic tube that could lead to chafing of the wire bundle, which could cause arcing and a consequent hydraulic fluid fire in an area outside of the smoke detection and fire extinguishing zone; this condition could result in an uncontrolled fire on the airplane.
AD 2008-14-16 · published Jul 17, 2008, effective Aug 21, 2008
328 Support Services GmbH Dornier Model 328-100 and -300 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-14-17 · published Jul 17, 2008, effective Aug 21, 2008
Airbus Model A330-200 and A340-300 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-15-01 · published Jul 17, 2008, effective Aug 21, 2008
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER, -120FC, -120QC, and -120RT Airplanes
This amendment adopts a new airworthiness directive (AD), applicable to all EMBRAER Model EMB-120 series airplanes, that requires revising the airplane flight manual to include operational limitations for use of the autopilot, installing two placards that advise the flight crew to check the pitch trim before descent, and modifying the elevator trim system, which would terminate the requirements of the AD. The actions specified by this AD are intended to prevent pitch trim upsets if the pitch trim actuators jam or freeze, which could result in reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
AD 2008-15-05 · published Jul 21, 2008, effective Aug 5, 2008
Boeing Model 737-300, -400, and -500 Series Airplanes
We are adopting a new airworthiness directive (AD) for all Boeing Model 737-300, -400, and -500 series airplanes. This AD requires inspecting to determine if certain carriage spindles are installed, repetitive inspections for corrosion and indications of corrosion on affected carriage spindles, and if necessary, related investigative action and corrective action. This AD also provides optional terminating action. This AD results from a report of corrosion found on carriage spindles that are located on the outboard trailing edge flaps. We are issuing this AD to detect and correct corrosion of the carriage spindle, which could result in fracture. Fracture of both the inboard and outboard carriage spindles, in the forward ends through the large diameters, on a flap, could adversely affect the airplane's continued safe flight and landing.
AD 2008-15-06 · published Jul 29, 2008, effective Sep 2, 2008
Cessna Aircraft Company Models 175 and 175A Airplanes
We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Models 175 and 175A airplanes. This AD requires you to check the airplane logbook to determine if the original engine mounting brackets have been replaced. If the original engine mounting brackets are still installed, this AD requires you to repetitively inspect those brackets for cracks and replace any cracked engine mounting bracket. After replacing all four original engine mounting brackets, no further action will be required by this AD. This AD was prompted by a report that the engine became detached from the firewall during landing on one of the affected airplanes. We are issuing this AD to detect and correct cracks in the engine mounting brackets, which could result in failure of the engine mounting bracket. This failure could lead to the engine detaching from the firewall.
AD 2008-16-02 · published Jul 30, 2008, effective Sep 3, 2008
Hawker Beechcraft Corporation Model 390 Airplanes
We are adopting a new airworthiness directive (AD) for certain Hawker Beechcraft Corporation Model 390 airplanes. This AD requires you to repetitively do a post-flight check (owner/operator holding at least a private pilot certificate checking for residual heat in the angle-of- attack (AOA) probes or an appropriately-rated mechanic doing a maintenance manual operational test of the heat of the AOA probes) after every flight and replace or modify (upload software) the stall warning AOA transmitters. This AD results from reports of the potential for unannunciated loss of the heating function in the left-hand (LH) and right-hand (RH) stall warning AOA transmitters of Model 390 airplanes. We are issuing this AD to correct potentially inadequate stall warning with loss of stick pusher function.
AD 2008-16-03 · published Jul 30, 2008, effective Aug 11, 2008
Pilatus Aircraft Ltd. Model PC-6 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-14-04 · published Jul 1, 2008, effective Aug 5, 2008
Eurocopter France Model AS 355 N Helicopters
We are adopting a new airworthiness directive (AD) for Eurocopter France Model AS 355 N helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The European Aviation Safety Agency (EASA), the technical agent for France, with which we have a bilateral agreement, states in the MCAI: "This Airworthiness Directive (AD) is issued because it was found that the power drawn by the starter generators from the engines is above the consumption capacity at altitudes above 3,000 meters, declared for the engines of AS 355 N helicopters. Excessive power consumption of the starter generators reduces the engine surge margin, which can result in engine failure." After engine start, the starter generator functions as the normal operational electrical generator. We are issuing this AD to require actions that are intended to address this unsafe condition.
AD 2008-14-01 · published Jul 10, 2008, effective Aug 14, 2008
Bell Helicopter Textron Canada Model 222, 222B, 222U, 230 and 430 Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron Canada (BHTC) Model 222, 222B, 222U, 230 and 430 helicopters that requires rewiring and testing the fuel valve switch on each engine and testing the ignitor system. This amendment is prompted by an in-flight incident in which a fuel valve switch failed, causing the fuel valve to inadvertently close. The actions specified by this AD are intended to prevent interruption of the fuel supply caused by failure of the fuel switch, which could result in loss of engine power and subsequent loss of control of the helicopter.
AD 2008-14-02 · published Jul 10, 2008, effective Aug 14, 2008
Agusta S.p.A. Model AB 139 and AW 139 Helicopters
We are adopting a new airworthiness directive (AD) for Agusta S.p.A. Model AB 139 and AW 139 helicopters. This AD results from mandatory continuing airworthiness information (MCAI) issued by the European Aviation Safety Agency (EASA), the Technical Agent for Italy, with which we have a bilateral agreement, which indicates that the Agusta AB 139's and AW 139's Fuselage Frame 5700 middle section is prone to fatigue damage. The actions are intended to detect cracks in the fuselage frame structure and to prevent structural failure in this area.
AD 2008-14-03 · published Jul 10, 2008, effective Aug 14, 2008
Bell Helicopter Textron Canada Model 206A, 206B, 206L, 206L-1, 206L-3, and 206L-4 Helicopters
We are adopting a new airworthiness directive (AD) for the specified Bell Helicopter Textron Canada (BHTC) Model 206A, 206B, 206L, 206L-1, 206L-3, and 206L-4 helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority to identify and correct an unsafe condition on an aviation product. The aviation authority of Canada, with which we have a bilateral agreement, states in the MCAI: "It has been determined that some helicopters have been fitted with a CRES steel fitting, part number (P/N) 407-030-750-103, and the installation of the tailboom attachment bolt does not meet the design criteria." We are issuing this AD to require actions that are intended to address the unsafe condition that results from an improper installation of the tailboom attachment bolt in the upper left-hand tailboom attachment CRES steel fitting.
AD 2008-14-06 · published Jul 10, 2008, effective Aug 14, 2008
Bell Helicopter Textron Canada Model 206L, L-1, L-3, L-4, and 407 Helicopters
We are adopting a new airworthiness directive (AD) for the specified Bell Helicopter Textron Canada (BHTC) helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority to identify and correct an unsafe condition on an aviation product. The Aviation Authority of Canada with whom we have a bilateral agreement states in the MCAI: "Horizontal stabilizers part numbers 206-023-119-167 and 407-023-801-109 may have manufacturing flaws on the inside surface of the upper and/or lower skin at the tailboom attachment inserts. These flaws may result in cracking of the skin and failure of the horizontal stabilizer." The manufacturer's service information states that in addition to cracks, the horizontal stabilizer may have deformation or debonding around and between the inserts. We are issuing this AD to require actions to correct the unsafe condition on these products.
AD 2008-14-05 · published Jul 17, 2008, effective Aug 21, 2008
Agusta S.p.A. Model A109E and A119 Helicopters
We are adopting a new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model A109E and A119 helicopters. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The European Aviation Safety Agency (EASA), the Technical Agent for Italy, with which we have a bilateral agreement, states in the MCAI: "Some cases of interference between the hydraulic pipe, P/N 109-0761-65-103, and the tail rotor control rod assembly have been detected on Model A109E helicopters * * * The interference, if not corrected, could damage the hydraulic pipes and lead to the loss of the hydraulic system No. 1 in flight. This AD * * * is issued to extend the same mandatory corrective actions to A119 model due to its design similarity with A109E." This AD requires actions that are intended to address this unsafe condition.
AD 2008-15-02 · published Jul 30, 2008, effective Sep 3, 2008
Eurocopter Deutschland GMBH Model MBB-BK 117C-2 Helicopters
We are adopting a new airworthiness directive (AD) for Eurocopter Deutschland GMBH (Eurocopter) Model MBB-BK 117C-2 helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The European Aviation Safety Agency for the Republic of Germany, with which we have a bilateral agreement, states in the MCAI:
AD 2008-15-03 · published Jul 30, 2008, effective Sep 3, 2008
MD Helicopters, Inc. Model 369A, OH-6A, 369D, 369E, 369F, 369FF, 369H, 369HE, 369HM, and 369HS Helicopters
This amendment adopts a new airworthiness directive (AD) for MD Helicopters, Inc. (MDHI) Model 369A, OH-6A, 369D, 369E, 369F, 369FF, 369H, 369HE, 369HM, and 369HS helicopters that requires repetitive tap inspections of each tail rotor (T/R) blade abrasion strip. This amendment is prompted by an incident in which an abrasion strip separated from a T/R blade. The actions specified by this AD are intended to prevent disbonding and subsequent separation of an abrasion strip from a T/R blade, which could result in vibration, loss of the T/ R, and subsequent loss of control of the helicopter.
AD 2008-15-04 · published Jul 30, 2008, effective Sep 3, 2008
Bell Helicopter Textron Canada (BHTC) Model 430 Helicopters
We are adopting a new airworthiness directive (AD) for BHTC Model 430 helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The aviation authority of Canada, with which we have a bilateral agreement, states in the MCAI: "It has been determined that the existing rigging procedures for the tail rotor pitch change mechanism have to be changed due to possibility of parts interference." The cumulative effect of individual part tolerances resulting in the total assemblage of those parts being out of tolerance could result in the tail rotor yoke striking another part other than the flapping stop (parts interference) cited in the MCAI. Also, the misalignment of the tail rotor counterweight bellcrank may result in higher tail rotor pedal forces and a higher pilot workload after failure of the <greek-i>1 hydraulic system. Both parts interference and the misaligned counterweight bellcrank create an unsafe condition. This AD require actions that are intended to address these unsafe conditions.
AD 2008-13-27 · published Jul 2, 2008, effective Aug 6, 2008
Turbomeca S.A. Arrius 2F Turboshaft Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-14-07 · published Jul 10, 2008, effective Aug 14, 2008
Lycoming Engines, Fuel Injected Reciprocating Engines
The FAA is superseding an existing airworthiness directive (AD) for certain fuel injected reciprocating engines manufactured by Lycoming Engines. That AD currently requires inspection, and replacement if necessary, of externally mounted fuel injector fuel lines. This AD requires the same actions but adds additional engine models and clarifies certain compliance time wording. This AD also exempts engines that have a Maintenance and Overhaul Manual with an Airworthiness Limitations Section that requires inspection and replacement, if necessary, of externally mounted fuel injector lines. This AD results from Lycoming Engines revising their Mandatory Service Bulletin to add new engine models requiring inspection, and from the need to clarify a repetitive inspection compliance time. We are issuing this AD to prevent failure of the fuel injector fuel lines that would allow fuel to spray into the engine compartment, resulting in an engine fire.
AD 2008-14-15 · published Jul 16, 2008, effective Aug 20, 2008
International Aero Engines AG (IAE) V2500 Series Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for IAE V2500-A1, V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, V2530-A5, V2533-A5, V2525-D5, and V2528-D5 turbofan engines. This AD requires removing certain No. 4 bearing oil system components from service at the next shop visit or by an end date determined by the engine model. This AD results from instances of oil loss from the No. 4 bearing compartment. We are issuing this AD to prevent heat damage to high- pressure turbine (HPT) and low-pressure turbine (LPT) critical life limited hardware such as the HPT stage 1-2 airseal. Damage to the HPT stage 1-2 airseal could cause uncontained engine failure and damage to the airplane.
AD 2008-16-01 · published Jul 31, 2008, effective Aug 15, 2008
General Electric Co. (GE) CF34-8E Series Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for GE CF34-8E series turbofan engines with certain part number (P/N) full authority digital engine controls (FADECs) installed. This AD requires reprogramming the FADEC software from version 8Ev5.40 to an FAA- approved software version. This AD results from six loss of thrust control events from the same software fault scenario. We are issuing this AD to prevent loss of thrust control and controllability of the airplane.
AD 2008-16-05 · published Jul 31, 2008, effective Sep 4, 2008
Rolls-Royce Deutschland Ltd & Co KG (RRD) Dart 528, 529, 532, 535, 542, and 552 Series Turboprop Engines
The FAA is superseding an existing airworthiness directive (AD) for RRD Dart 528, 529, 532, 535, 542, and 552 Series turboprop engines. That AD currently requires a dimensional inspection of the intermediate pressure turbine (IPT) disk or an ultrasonic inspection of the seal arm contact between the high pressure turbine (HPT) and the IPT disk seal arm and reworking or replacing the IPT disk if worn beyond acceptable limits. This AD continues to require those actions. This AD results from us including an incorrect engine model and omitting an engine model from the applicability of the existing AD. We are issuing this AD to prevent HPT disk failure, which can result in an uncontained engine failure and damage to the airplane.
AD 2008-13-28 · published Jul 2, 2008, effective Jul 17, 2008
Hartzell Propeller Inc. ( )HC-( )(2,3)Y(K,R)-2 Two- and Three-Bladed Compact Series Propellers
The FAA is adopting a new airworthiness directive (AD) for Hartzell Propeller Inc. left-hand rotating ( )HC-( )(2,3)Y(K,R)-2 two- and three-bladed, aluminum hub, "compact" series propellers, with hubs having a non-suffix serial number, and lubrication holes located on the shoulder of the hub blade socket. These propellers are installed on Lycoming Engines LIO-360 series and LO-360 series reciprocating engines installed on Piper Aircraft, Inc. Seneca PA-34-200 and Seminole PA-44-180, and Hawker Beechcraft Corporation Model 76 Duchess, airplanes. This AD requires initial and repetitive eddy current inspections (ECI), of the area around the lubrication holes of the hub blade sockets. This AD results from four reports of propeller hub cracks, including two in-flight blade separation events. We are issuing this AD to prevent failure of the propeller hub, which could result in blade separation and loss of control of the airplane.
