Airworthiness Directive · Amendment 39-15584 · Boeing Model 767-200, -300, and -400ER Series Airplanes
Boeing Model 767-200, -300, and -400ER Series Airplanes
This AD applies to Boeing Model 767-200, -300, and -400ER series airplanes, certificated in any category; as identified in Boeing Special Attention Service Bulletin 767-35-0054, dated July 6, 2006.
We are adopting a new airworthiness directive (AD) for certain Boeing Model 767-200, -300, and -400ER series airplanes. This AD requires an inspection to determine the manufacturer and manufacture date of the oxygen masks in the passenger service units and the flight attendant and lavatory oxygen boxes, as applicable. This AD also requires related investigative/corrective actions if necessary. This AD results from a report that several passenger masks with broken in-line flow indicators were found following a mask deployment. We are issuing this AD to prevent the in-line flow indicators of the passenger oxygen masks from fracturing and separating, which could inhibit oxygen flow to the masks and consequently result in exposure of the passengers and cabin attendants to hypoxia following a depressurization event.
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Within 60 months after the effective date of this AD, do a general visual inspection to determine the manufacturer and manufacture date of the oxygen masks in the passenger service units and the flight attendant and lavatory oxygen boxes, as applicable, and do the applicable related investigative and corrective actions, by accomplishing all of the applicable actions specified in the Accomplishment Instructions of Boeing Special Attention Service Bulletin 767-35-0054, dated July 6, 2006; except where the service bulletin specifies installing a new oxygen mask, replace the oxygen mask with one that was not manufactured by B/E Aerospace between January 1, 2002, and March 1, 2006, or with a modified oxygen mask having an improved flow indicator. The related investigative and corrective actions must be done before further flight.
Note 1: The Boeing service bulletin refers to B/E Aerospace Service Bulletin 174080-35-01, dated February 6, 2006; and Revision 1, dated May 1, 2006; as additional sources of service information for modifying the oxygen mask assembly by replacing the flow indicator with an improved flow indicator.
