24 Airworthiness Directives: 19 airplane, 3 rotorcraft, 2 engine.
AD 2023-07-06 · published May 16, 2023, effective Jun 20, 2023
De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and - 402 airplanes. This AD was prompted by reports of corrosion on the horizontal stabilizer lower center skin panel, including a finding of corrosion where the skin thickness had been substantially reduced, which affected design margins. This AD requires inspecting the horizontal stabilizer lower center skin panel for corrosion, and reworking, repairing, or replacing the lower center skin panel if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-07 · published May 16, 2023, effective Jun 20, 2023
MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440), CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL- 600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports from the supplier that sensing elements of the bleed air leak detection system were manufactured with insufficient salt fill, which can result in an inability to detect hot bleed air leaks. This AD requires testing of all affected overheat detection sensing elements of the bleed air leak detection system, and replacement if necessary. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-10 · published May 16, 2023, effective Jun 20, 2023
Viking Air Limited (Type Certificate Previously Held by Bombardier, Inc.; Canadair Limited) Airplanes
The FAA is superseding Airworthiness Directive (AD) 96-12-11, which applied to all Canadair Model CL-215-1A10 airplanes. AD 96-12-11 required repetitive inspections to detect discrepancies of the microswitches fitted at the water door actuator; replacement of any discrepant microswitch; and modification of the water door actuator switches, which terminates the repetitive inspections. This AD continues to require the modification of the water door actuator switches. This AD also requires modification of the water door solenoid valve common grounds, adds airplanes to the applicability, and specifies a parts installation limitation for the water door solenoid valve. This AD was prompted by reports of uncommanded opening of the water doors during flight and water scooping. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-13 · published May 16, 2023, effective Jun 20, 2023
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of broken lower attachment studs on the AFT galley complex. This AD requires repetitive detailed inspections of the lower attachment studs and, depending on findings, replacement of the lower attachment studs, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-08-01 · published May 16, 2023, effective Jun 20, 2023
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a report that certain airplane flight manuals (AFMs) contain figures with incorrect performance charts for landing on contaminated runways. This AD requires revising the existing AFM to correct the affected performance charts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-08-02 · published May 16, 2023, effective Jun 20, 2023
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-05-06 and AD 2021-08-19, which both applied to certain The Boeing Company Model 787-8, -9, and -10 airplanes. AD 2018-05-06 required repetitive inspections of the bilge barriers located in the forward and aft cargo compartments for disengaged decompression panels, and reinstalling any disengaged panels; and required replacing the existing decompression panels with new panels and straps, which terminated the repetitive inspections. AD 2021-08-19 required repetitive general visual inspections for disengaged or damaged decompression panels of the bilge barriers located in the forward and aft cargo compartments, reinstallation of disengaged but undamaged panels, and replacement of damaged panels. This AD was prompted by reports of multiple incidents of torn decompression panels found in the bilge area, and the development of new procedures for changing or replacing the bilge barrier assembly in the forward and aft cargo compartments. This AD retains the requirements of AD 2021-08-19 and requires changing or replacing the bilge barrier assembly in the forward and aft cargo compartments, which terminates the repetitive inspections. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-08-03 · published May 16, 2023, effective Jun 20, 2023
Gulfstream Aerospace Corporation Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation Model G-1159A and G-1159B airplanes and all Model G-IV and GIV-X airplanes. This AD was prompted by a report that the ground spoiler actuator installation does not preclude improper hydraulic line connections that could result in unintended asymmetrical spoiler deployment. This AD requires incorporating corrective actions that physically prevent improper connection of the hydraulic lines to the ground spoiler actuator. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-09-10 · published May 16, 2023, effective May 31, 2023
Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes. This AD was prompted by reports of excessive wear on certain starter generator brushes installed in the starter generator. This AD requires repetitive general visual inspections of the starter generator brushes installed in the starter generator and, depending on findings, replacement of the starter generator, and limits installation of affected generators, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-09-13 · published May 16, 2023, effective May 31, 2023
Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-18- 09, which applied to all Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G airplanes; and Model C-130A, HP-C-130A, EC-130Q, C-130B, and C-130H airplanes. AD 2019-18-09 required a visual inspection of the center wing upper and lower rainbow fittings for cracks, an eddy current inspection of the center wing lower rainbow fittings for cracks, and replacement if necessary. This AD was prompted by an analysis of reported cracks showing repetitive inspections are needed to adequately address cracked inner tangs of the center wing lower rainbow fittings. This AD requires repetitive inspections of the center wing upper and lower rainbow fittings for cracks and replacement if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-08-07 · published May 17, 2023, effective Jun 21, 2023
Allied Ag Cat Productions, Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for Allied Ag Cat Productions, Inc. (Allied Ag Cat) Model G-164A and G-164B airplanes with certain supplemental type certificates (STCs) installed. This AD was prompted by an accident involving an Allied Ag Cat Model G- 164B airplane where the airplane's propeller pitch control (PPC) linkage detached from the PPC of the engine and resulted in an accident that significantly damaged the airplane and injured the pilot. This AD requires installing a secondary retention feature (bolt, washer, and safety wire) on the PPC lever and the PPC assembly. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-10-04 · published May 17, 2023, effective Jun 1, 2023
Boeing Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model B-17E, B-17F, and B-17G airplanes. This AD was prompted by a report indicating that the left front spar lower fitting had completely separated at the wing-to-fuselage joint, and the equivalent joint on the right side of the airplane was cracked. This AD requires inspections of the wing terminal-to-spar chord joints, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-09-01 · published May 22, 2023, effective Jun 26, 2023
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 series airplanes; Model A319 series airplanes; Model A320-211, -212, -214, -216, -231, -232, -233, -251N, -252N, - 253N, -271N, -272N, and -273N airplanes; and Model A321 series airplanes. This AD was prompted by a report that certain overheat detection system (OHDS) sensing elements installed at certain positions might not properly detect thermal bleed leak events due to a quality escape during the manufacturing process. This AD requires a one-time detailed inspection of each affected part installed at an affected position and replacement if necessary, and prohibits the installation of affected parts at affected positions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-09-02 · published May 22, 2023, effective Jun 26, 2023
MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440); CL-600-2C10 (Regional Jet Series 700, 701, & 702); CL-600-2C11 (Regional Jet Series 550); CL-600-2D15 (Regional Jet Series 705); CL-600-2D24 (Regional Jet Series 900); and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a determination that aircraft maintenance manual (AMM) tasks and certification maintenance requirement (CMR) tasks are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive AMM and CMR tasks. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-09-03 · published May 22, 2023, effective Jun 6, 2023
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A310 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-08-04 · published May 25, 2023, effective Jun 29, 2023
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by reports of a loss of water pressure during flight and water leaks that affected multiple pieces of electronic equipment. This AD requires a detailed visual inspection of all door 1 and door 3 lavatory and galley potable water systems for any missing or incorrectly installed clamshell couplings, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-09-04 · published May 25, 2023, effective Jun 29, 2023
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes, and certain Model 737-8 and -9 airplanes. This AD was prompted by reports of uncommanded escape slide deployments in the passenger compartment, caused by too much tension in the inflation cable and the movement of the escape slide assembly in the escape slide compartment. This AD requires inspecting all escape slide assemblies to identify affected parts, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-08-05 · published May 26, 2023, effective Jun 30, 2023
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777 airplanes. This AD was prompted by reports of cracks found in the pivot bulkhead forward outer chord of a certain station. Analysis revealed higher bending stresses across the chord than originally assessed. This AD requires repetitive detailed and high frequency eddy current (HFEC) inspections of the pivot bulkhead forward outer chord of a certain station and longeron fitting for cracking and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-10-02 · published May 26, 2023, effective May 26, 2023
Transport and Commuter Category Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-23- 12, which applied to all transport and commuter category airplanes equipped with a radio (also known as radar) altimeter. AD 2021-23-12 required revising the limitations section of the existing airplane/ aircraft flight manual (AFM) to incorporate limitations prohibiting certain operations requiring radio altimeter data when in the presence of 5G C-Band interference as identified by Notices to Air Missions (NOTAMs). Since the FAA issued AD 2021-23-12, the FAA determined that additional limitations are needed due to the continued deployment of new 5G C-Band stations whose signals are expected to cover most of the contiguous United States at transmission frequencies between 3.7-3.98 GHz. For certain airplanes, this AD requires revising the limitations section of the existing AFM to incorporate limitations prohibiting certain operations requiring radio altimeter data, due to the presence of 5G C-Band interference. This AD also requires modifying certain airplanes to allow safe operations in the U.S. 5G C-Band radio frequency environment. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-09-12 · published May 31, 2023, effective Jul 5, 2023
Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-12, PC-12/45, PC-12/ 47, and PC-12/47E airplanes. This AD is prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as insufficient grounding of the vapor cycle cooling system (VCCS) compressor/condenser. This AD requires inspecting the power return and chassis grounding cable attachment points at frame 37, including the attachment parts, and depending on the inspection results, corrective action. This AD also requires modifying the installation of the VCCS compressor/condenser power return cables and installing an additional isolated VCCS chassis ground cable. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-08-06 · published May 18, 2023, effective Jun 22, 2023
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters (Airbus) Model AS332C, AS332C1, AS332L, AS332L1, AS332L2, and EC225LP helicopters. This AD is prompted by modifications developed by Airbus to address a report of an emergency exit window that required excessive pushing force to jettison. This AD requires removing skived polytetrafluoroethylene tape (PTFE tape) (if installed) and replacing certain polychloroprene seals with silicone seals, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits installing a jettisonable window unless the actions required by this AD have been accomplished. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-10-05 · published May 23, 2023, effective Jun 7, 2023
Leonardo S.p.a. Helicopters
The FAA is superseding Emergency Airworthiness Directive (AD) 2023-07-51, which applied to all Leonardo S.p.a. Model AB139 and AW139 helicopters and which was previously sent to all known U.S. owners and operators of those helicopters. Emergency AD 2023-07-51 required inspecting for a gap between the main rotor (M/R) pitch link upper rod end assembly bearing and the pitch control lever assembly and, depending on the results, replacing or re-identifying the M/R pitch link upper rod end assembly. Emergency AD 2023-07-51 also prohibited installing an affected M/R pitch link upper rod end assembly. Since the FAA issued Emergency AD 2023-07-51, it has been determined that a gap between the M/R pitch link upper rod end assembly bearing and the pitch control lever assembly that is within a certain dimension tolerance is acceptable. This AD continues to require the actions in Emergency AD 2023-07-51, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference in this AD, but allows a gap of less than 0.5 mm. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-09-07 · published May 25, 2023, effective Jun 29, 2023
Sikorsky Aircraft Corporation Helicopters
The FAA is superseding Airworthiness Directive (AD) 2022-02-01 for Sikorsky Aircraft Corporation Model S-92A helicopters with certain part-numbered main rotor stationary swashplate assemblies (swashplate assemblies) that had accumulated 1,600 or more total hours time-in- service (TIS) installed. AD 2022-02-01 required visually inspecting the swashplate assembly at specified intervals and depending on the results, removing the swashplate assembly from service. Since the FAA issued AD 2022-02-01, the FAA determined it was necessary to expand the applicability and require more detailed inspections to address the unsafe condition. This AD retains the actions of AD 2022-02-01, expands the applicability, adds a detailed recurring visual inspection, and requires either eddy current inspections (ECI) or fluorescent penetrant inspections (FPI). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-11 · published May 9, 2023, effective Jun 13, 2023
CFM International, S.A. Engines
The FAA is adopting a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) Model LEAP-1B engines. This AD was prompted by a report of multiple aborted takeoffs and air turn- backs (ATBs) caused by high-pressure compressor (HPC) stall, which was induced by high levels of non-synchronous vibration (NSV). A subsequent investigation by the manufacturer revealed that wear on the No. 3 bearing spring finger housing can lead to high levels of NSV. This AD requires repetitive calculations of the oil filter delta pressure (OFDP) data and, depending on the results of the calculation, replacement of the No. 3 bearing spring finger housing. This AD also prohibits installation of an engine with an affected No. 3 bearing spring finger housing onto an airplane that already has one engine with an affected No. 3 bearing spring finger housing installed. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-09-06 · published May 19, 2023, effective Jun 23, 2023
CFM International, S.A. Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for all CFM International, S.A. (CFM) LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP- 1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, and LEAP-1A35A (LEAP-1A) model turbofan engines. This AD was prompted by a manufacturer investigation that revealed that certain high-pressure turbine (HPT) rotor stage 1 disks (HPT stage 1 disks), forward outer seals, and compressor rotor stages 6-10 spools were manufactured from material suspected to have reduced material properties due to iron inclusion. This AD requires replacement of certain HPT stage 1 disks, forward outer seals, and compressor rotor stages 6-10 spools. The FAA is issuing this AD to address the unsafe condition on these products.
