37 Airworthiness Directives: 32 airplane, 2 rotorcraft, 3 engine.
AD 2023-06-13 · published Apr 4, 2023, effective Apr 19, 2023
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by the determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C- Band), and a recent determination that this interference can result in unavailable or misleading radio altimeter information, adversely affecting the performance of the automatic flight control system (AFCS) and fly-by-wire (FBW) systems and resulting in increased flightcrew workload during takeoff, approach, and landing below 400 feet above ground level (AGL). This AD requires revising the existing airplane flight manual (AFM) with new limitations to mitigate identified hazards due to 5G C-Band interference as identified by Notices to Air Missions (NOTAMs). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-01 · published Apr 4, 2023, effective Apr 19, 2023
Airbus Canada Limited Partnership Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by several unscheduled PW1500G engine removals due to certain crew alerting system (CAS) messages being displayed, high vibration, or debris found on the magnetic chip collector of a bearing compartment. This AD prohibits dispatch of an airplane with an affected engine having an applicable CAS message displayed, unless the bearing compartment chip collector and oil filter are inspected and any debris found is dispositioned, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-04-15 · published Apr 5, 2023, effective May 10, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-09- 12, which applied to certain Dassault Aviation Model FALCON 7X airplanes. AD 2021-09-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2021-09- 12 and requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-06 · published Apr 5, 2023, effective May 10, 2023
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. This AD was prompted by a determination that new airworthiness limitations are necessary to require periodic replacement; or testing, and replacement if necessary; of the oxygen sensor of the nitrogen generation system (NGS). This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate the new airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-12 · published Apr 5, 2023, effective Apr 20, 2023
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 767-2C series airplanes. This AD was prompted by arcing on an electrical terminal lug in a certain electrical power panel that caused heat and smoke damage, as a result of a loose power feeder terminal lug connection. This AD requires inspection of each terminal lug on certain electrical power panels for evidence of arcing and/or loose connection and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-04-09 · published Apr 7, 2023, effective Apr 24, 2023
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A310 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-04-10 · published Apr 7, 2023, effective May 12, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-26- 07, which applied to all Dassault Aviation Model MYSTERE-FALCON 900 airplanes. AD 2020-26-07 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that a new airworthiness limitation is necessary. This AD continues to require the actions in AD 2020-26-07, and also requires revising the existing maintenance or inspection program, as applicable, to incorporate a new airworthiness limitation; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-04-13 · published Apr 7, 2023, effective May 12, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-04- 02, which applied to certain Dassault Aviation Model FALCON 2000EX airplanes. AD 2021-04-02 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2021-04- 02, and also requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-04-16 · published Apr 7, 2023, effective May 12, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-21- 20, which applied to certain Dassault Aviation Model FALCON 900EX airplanes. AD 2020-21-20 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and/or airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2020-21-20 and requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations; as specified in European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-04 · published Apr 7, 2023, effective May 12, 2023
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by reports of ram air turbine (RAT) pump barrel assembly failures, which caused the RAT to fail to provide hydraulic power. The failures were determined to be caused by variations in the bronze metal used during manufacturing, which can result in varying fatigue properties. This AD requires an inspection or records review to determine the part number of the RAT pump and control module (PCM) and of the RAT assembly, and replacement of any RAT PCM or any RAT assembly having certain part numbers. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-07 · published Apr 7, 2023, effective May 12, 2023
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-21- 07, which applied to all Airbus SAS Model A350-941 and -1041 airplanes. AD 2020-21-07 required replacement of affected passenger oxygen masks (which includes re-identifying the parts). This AD was prompted by a determination that additional parts are subject to the unsafe condition. This AD continues to require the actions in AD 2020-21-07, and also requires replacing additional affected parts; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-08 · published Apr 7, 2023, effective May 12, 2023
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-04- 05, which applied to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. AD 2021-04-05 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2021-04-05 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-10 · published Apr 7, 2023, effective May 12, 2023
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200, A330-200 Freighter, A330-300, A330-800, A330-900, A340-200, A340-300, A340-500, and A340-600 series airplanes. This AD was prompted by a report that an A319 airplane lost the right- hand front windshield in flight. Due to the design similarity, this condition can also exist or develop on Model A330 and A340 airplanes. This AD requires repetitive detailed inspections (DET) and electrical test measurements (ETM) of the affected parts and applicable corrective action, and prohibits the installation of affected parts under certain conditions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-11 · published Apr 7, 2023, effective May 12, 2023
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a report that in case of a flap, slat, or slat- flap failure in flight, resetting the slat flap control unit (SFCU) to clear the error using the airplane flight manual (AFM) could result in the stall protection computer (SPC) setting the low-speed cue to the most conservative stall advance mode. This AD requires revising the non-normal procedures section of the existing AFM to provide the flightcrew with procedures for addressing failure warnings in the slat and flap control systems. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-13 · published Apr 7, 2023, effective May 12, 2023
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-14 · published Apr 7, 2023, effective May 12, 2023
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-06- 02, which applied to all Airbus SAS Model A318-111, and -112 airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. AD 2022-06-02 required new repetitive inspections of the 80 view unit (80VU) rack lower lateral fittings, lower central support, upper fittings, central post, and shelves attachments for discrepancies, and corrective actions if necessary. This AD was prompted by a determination that the compliances times must be revised to address the unsafe condition. This AD continues to require the actions in AD 2022- 06-02 with revised compliance times, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-15 · published Apr 13, 2023, effective May 18, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-09-03 and AD 2018-20-07, which applied to all Dassault Aviation Model MYSTERE-FALCON 50 airplanes. AD 2017-09-03 and AD 2018-20-07 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2018-20-07 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-01 · published Apr 13, 2023, effective May 18, 2023
ATR-GIE Avions de Transport Régional Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain ATR--GIE Avions de Transport R[eacute]gional Model ATR42-500 and ATR72-212A airplanes. This AD was prompted by in-service experience that has shown that the lateral flight guidance of the flight director/ auto pilot may not limit HI BANK turns in severe icing conditions. This AD requires the replacement of the affected new avionics suite (NAS), as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits the installation of the affected NAS on any airplane. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-02 · published Apr 13, 2023, effective May 18, 2023
Bombardier, Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL- 600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a determination that, due to a lack of flightcrew awareness, smoke hoods with a certain part number installed throughout the airplane could be mistaken for protective breathing equipment (PBE). This AD requires an inspection or records review to determine if any smoke hood with a certain part number is installed in any location on the airplane and, depending on the results, removing the smoke hood and associated placards and installing new placards. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-03 · published Apr 13, 2023, effective May 18, 2023
De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and - 402 airplanes. This AD was prompted by an investigation of incorrectly manufactured sleeves that were potentially installed in the main landing gear (MLG) forward door linkage assembly. This AD requires review of technical records and inspections to determine if a discrepant sleeve is installed, replacement of any discrepant sleeve and re-identification of the MLG forward door linkage assembly. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-04 · published Apr 13, 2023, effective May 18, 2023
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by reports of some passenger oxygen mask dispensing units (MDUs) with lanyards that are too long to meet the proper length specifications of the airplane. This AD requires replacing the affected MDUs with units that meet the proper length specifications, replacing the placards, and re-identifying the assemblies. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-07 · published Apr 13, 2023, effective May 18, 2023
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-202, -203, -223, and -243 airplanes; Model A330- 200 Freighter series airplanes; Model A330-300 series airplanes; Model A340-200 series airplanes; and Model A340-300 series airplanes. This AD was prompted by a report that damage was found to the firewall and fuselage skin in the auxiliary power unit (APU) compartment area on Model A330 airplanes. This AD requires replacing affected tee ducts with serviceable parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-08 · published Apr 13, 2023, effective May 18, 2023
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-18- 07, which applied to certain Airbus SAS Model A319-111, -112, -113, - 114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, - 211, -212, -213, -231, and -232 airplanes. AD 2019-18-07 required repetitive rototest inspections of the open tack holes and rivet holes at the cargo floor support fittings of the fuselage, including doing all applicable related investigative actions and repair if necessary. AD 2019-18-07 also adds actions (modification) for certain airplanes. Since the FAA issued AD 2019-18-07, it was determined that certain airplanes need to do additional work. This AD continues to require the actions in AD 2019-18-07 and requires additional work for certain airplanes, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-09 · published Apr 13, 2023, effective May 18, 2023
Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace LP Model Galaxy airplanes and Model Gulfstream 200 airplanes. This AD was prompted by reports that wing flap fairing debonding and corrosion were discovered at certain areas of the lower skin on both wings. This AD requires an inspection for corrosion in certain areas of the wing skin fairings, additional inspections if necessary, resealing the fairings with new fillet seal, and applicable corrective actions, as specified in a Civil Aviation Authority of Israel (CAAI) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-12 · published Apr 13, 2023, effective May 18, 2023
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-08- 08, which applied to all Airbus SAS Model A350-941 and -1041 airplanes. AD 2021-08-08 required replacing affected bleed duct assemblies and bleed gimbals at the wing-to-pylon interface, and prohibited the installation of affected parts. This AD was prompted by a report of a welding quality issue in the gimbal joint of the air bleed duct at each wing-to-pylon interface and the consequent deformation of the gimbal inner ring, and by new findings that affected bleed gimbals were found on certain airplanes that did not have any maintenance record of affected part replacement. This AD continues to require the actions in AD 2021-08-08 and, for certain airplanes, requires inspection of the bleed gimbals to determine the part number, and replacement if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-08 · published Apr 14, 2023, effective May 19, 2023
Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-12/47E airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as corrosion of the actuator attachment lug areas underneath the anti-rotation pads of the main landing gear (MLG) and nose landing gear (NLG). This AD requires replacing certain MLG and NLG electro-mechanical actuators. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-09 · published Apr 14, 2023, effective May 1, 2023
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-27- 07, which applied to certain The Boeing Company Model 747-400 and 747-8 series airplanes. AD 2022-27-07 required inspecting for wear of the transfer pump housing inlet check valves and transfer pump motor impeller inlet adapters for the horizontal stabilizer fuel tank and doing corrective actions, if necessary. This AD was prompted by the discovery that certain airplanes were incorrectly included in the applicability of AD 2022-27-07. This AD continues to require inspecting for wear of the transfer pump housing inlet check valves and transfer pump motor impeller inlet adapters for the horizontal stabilizer fuel tank and doing corrective actions, if necessary. This AD also removes certain airplanes from the applicability, redefines the definition of an "activated" horizontal stabilizer fuel tank, and limits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-15 · published Apr 24, 2023, effective May 30, 2023
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by reports of missing shims, a wrong type of shim, shanked fasteners, fastener head gaps, and incorrect hole sizes common to the left and right sides at a certain station (STA) frame inner chord and web. This AD requires inspecting for existing repairs, inspecting the area for cracking, and performing applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-02 · published Apr 24, 2023, effective May 30, 2023
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-03- 12, which applied to all Airbus SAS Model A330-200, -300, -800, and - 900 series airplanes; and Model A340-200, -300, -500, and -600 series airplanes. AD 2022-03-12 required replacing the doghouse door lock placard with an improved instruction placard. This AD was prompted by reports that the instructions on the doghouse door lock placard are unclear and incomplete, and by a determination that additional parts need to be modified. This AD continues to require the actions in AD 2022-03-12 and expands the list of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits the installation of affected parts under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-04 · published Apr 24, 2023, effective May 30, 2023
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by a determination that during certain modes, the flight guidance/autopilot does not account for engine failure while capturing an altitude. This AD requires revising the existing airplane flight manual (AFM) to add new limitations and procedures. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-05 · published Apr 24, 2023, effective May 30, 2023
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 airplanes. This AD was prompted by reports the overwing emergency exit door (OWEED) escape line may be incorrectly routed. This AD requires inspecting the OWEED escape line and correcting the routing if required, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-12 · published Apr 24, 2023, effective May 30, 2023
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-05 · published Apr 14, 2023, effective May 19, 2023
Bell Textron Canada Limited Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Bell Textron Canada Limited Model 206A, 206A-1 (OH-58A), 206B, 206B-1, 206L, 206L-1, 206L-3, and 206L-4 helicopters. This AD was prompted by a loss of tail rotor (TR) drive due to a failure of an adhesively bonded joint between an adapter and a tube on one of the segmented TR drive shaft (TRDS) assemblies. This AD requires determining if an affected TRDS is installed; repetitively inspecting the bond line for damage; repetitively performing a proof load test of the TRDS assembly; and depending on the results of the inspections or the proof load tests, removing an affected TRDS from service and replacing it with a serviceable TRDS. This AD also prohibits installing a TRDS unless it meets certain requirements, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-07-03 · published Apr 25, 2023, effective May 10, 2023
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model AB412 and AB412 EP helicopters. This AD was prompted by a report of a fatigue crack in a left-hand (LH) fin spar cap. This AD requires cleaning and repetitively inspecting certain part-numbered LH fin spar caps, and repetitively inspecting the exterior of the fin skin and, depending on the results, accomplishing corrective action. This AD also prohibits certain corrective actions as a terminating action for the repetitive inspections unless the corrective actions have been approved as a terminating action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-05 · published Apr 5, 2023, effective May 10, 2023
CFM International, S.A. Turbofan Engines
The FAA is superseding Airworthiness Directive (AD) 2021-10-09 for certain CFM International, S.A. (CFM) CFM56-5B and CFM56-7B model turbofan engines with a certain high-pressure turbine (HPT) inner stationary seal installed. AD 2021-10-09 required removal, inspection, and replacement of the affected HPT inner stationary seal and, depending on the findings, replacement of the rotating air HPT front seal, HPT rotor blades, and No. 3 ball bearing. This AD was prompted by cracks found in the rotating air HPT front seal. After the FAA issued AD 2021-10-09, the manufacturer notified the FAA that the service information incorrectly lists the year of certain honeycomb repairs and that affected HPT inner stationary seals could potentially be installed on CFM CFM56-5C model turbofan engines. This AD requires removal, inspection, and replacement of the affected HPT inner stationary seal and, depending on the findings, replacement of the rotating air HPT front seal, HPT rotor blades, and No. 3 ball bearing. This AD also revises the applicability to add CFM CFM56-5C model turbofan engines. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-05-17 · published Apr 5, 2023, effective May 10, 2023
General Electric Company Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) GE90-76B, GE90-85B, GE90-90B, and GE90-94B model turbofan engines. This AD was prompted by a commanded in-flight shutdown (IFSD) due to cracking and rockback of the high- pressure turbine (HPT) stage 2 nozzles resulting in blade liberation, severe rotor imbalance, and liberation of the exhaust centerbody. This AD requires initial and repetitive borescope inspections (BSIs) of the forward platforms of the HPT stage 2 blades or the leading edges of the HPT stage 2 nozzles and, depending on the results of the inspections, removal and replacement of the HPT stage 2 nozzles with parts eligible for installation. As a mandatory terminating action to the repetitive BSIs of the forward platforms of the HPT stage 2 blades or the leading edges of the HPT stage 2 nozzles, this AD requires replacing the HPT stage 2 nozzles. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-06-14 · published Apr 25, 2023, effective May 30, 2023
Pratt & Whitney Canada Corporation Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney Canada Corporation (P&WC) PW308A and PW308C model turbofan engines. This AD is prompted by a manufacturer's design review, which identified that the combustion chamber outer case (CCOC) to rear compressor case (RCC) flange bolt low cycle fatigue life was inadequate and that those flange bolts may develop cracks resulting in flange bolt fracture. This AD requires replacing all CCOC flange bolts and modifying the CCOC and inner bypass ducts. This AD also prohibits installation of certain flange bolts on any affected engine, as specified in a Transport Canada AD, which is proposed for incorporation by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
