52 Airworthiness Directives: 28 airplane, 15 rotorcraft, 5 engine, 4 appliance.
AD 2021-06-07 · published Apr 5, 2021, effective Apr 20, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200 series and A330-300 series airplanes. This AD was prompted by reports of cracked flexible hoses in the courier area oxygen system (CAOS). This AD requires repetitive detailed inspections of the CAOS and replacement of affected parts if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-06-08 · published Apr 5, 2021, effective May 10, 2021
Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-19- 25, which applied to all Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235-200, and CN-235-300 airplanes; and Model C-295 airplanes. AD 2017-19-25 required repetitive inspections and operational checks of the affected fuel valves, and corrective actions if necessary. This AD continues to require repetitive inspections and operational checks of the affected fuel valves, and corrective actions if necessary, and also limits the installation of affected parts to those that are maintained in accordance with certain instructions, as specified in a European Union Aviation Safety Agency (EASA), which is incorporated by reference. This AD was prompted by a determination that it is necessary to limit the installation of affected parts specified in AD 2017-19-25 to those parts that are maintained in accordance with certain instructions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-06-09 · published Apr 5, 2021, effective Apr 20, 2021
Fokker Services B.V. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD was prompted by a report indicating that a passenger door opened under residual cabin pressure during taxiing after landing, and following the display of the CAB PRESS CTL alert. This AD requires revising the existing airplane flight manual (AFM) to update the Cabin Pressurization Control Fault procedure, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-01 · published Apr 5, 2021, effective May 10, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A320, and A321 series airplanes. This AD was prompted by a report that the oil used to protect the nose landing gear (NLG) main fittings for transportation and storage was not removed before final heat treatment of the affected parts, possibly generating sub-surface cavities during heat treatment of the affected parts. This AD requires replacing each affected NLG main fitting with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA), which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-02 · published Apr 5, 2021, effective Apr 20, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-200 series airplanes. This AD was prompted by reports indicating that the pitot heat switch is not always set to ON, which could result in misleading air data. This AD requires replacement of pitot anti-icing system components, installation of a junction box and wiring provisions, repetitive testing of the anti- icing system, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-03 · published Apr 5, 2021, effective May 10, 2021
MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2015-05- 03, which applied to certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. AD 2015-05-03 required revising the existing maintenance or inspection program, as applicable, to incorporate new or revised maintenance requirements and airworthiness limitations, and incorporating structural repairs and modifications to preclude widespread fatigue damage (WFD). This AD continues to require the actions specified in AD 2015-05-03. This AD also requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, and incorporating additional structural repairs and modifications to preclude WFD. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary, as well as the corresponding structural repairs and modifications to preclude WFD. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-04 · published Apr 5, 2021, effective May 10, 2021
ATR-GIE Avions de Transport Régional Airplanes
The FAA is adopting a new airworthiness directive (AD) for all ATR-GIE Avions de Transport R[eacute]gional Model ATR42 airplanes and Model ATR72 airplanes. This AD was prompted by in-service data, which revealed that the minimum operating airspeeds in severe icing conditions, computed to provide adequate stall margins, do not provide sufficient margins to stall speeds at high bank angle while exiting severe icing conditions. This AD requires revising the existing aircraft flight manual (AFM) and applicable corresponding operational procedures to provide emergency procedures and limitations for operating in severe icing conditions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-14 · published Apr 5, 2021, effective Apr 20, 2021
Yaborã Indústria Aeronáutica S.A. (Type Certificate Previously Held by Embraer S.A.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica S.A. Model EMB-135 and EMB-145 airplanes. This AD was prompted by a report involving disconnection of a side arm strut from the right main landing gear (MLG); a subsequent investigation found that the side arm strut lower bearing was installed inverted on the airplane. This AD requires doing a general visual inspection of the right and left MLG to verify certain conditions and doing all applicable on-condition actions, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-04-11 · published Apr 6, 2021, effective May 11, 2021
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-01- 10, which applied to certain Airbus SAS Model A350-941 airplanes. AD 2020-01-10 required installing flight control and guidance system (FCGS) software (SW) X11 Standard (STD). This AD retains the requirements of AD 2020-01-10, requires modifying the electrical power supply of the air generation system (AGS) ram air outlet door actuators, and expands the applicability by adding airplanes, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by the development of a modification that forces the AGS ram air outlet doors to be flush in cases of total engine flameout or loss of the main electrical supply. Because of this additional modification, certain airplanes that were excluded from the applicability of AD 2020-01-10 are included in the applicability of this AD. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-06 · published Apr 6, 2021, effective May 11, 2021
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a determination that certain airplanes have outdated magnetic variation (MagVar) tables inside navigation systems. This AD requires revising the existing airplane flight manual (AFM) to update the Flight Management System (FMS) and Inertial Reference System (IRS) limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-09 · published Apr 7, 2021, effective May 12, 2021
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2007-07- 03, which applied to certain The Boeing Company Model 747-100, 747- 100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. AD 2007-07-03 required repetitive tests to detect hot air leaking from the trim air diffuser ducts or sidewall riser duct assemblies (collectively referred to as TADDs), related investigative actions, and corrective actions if necessary. AD 2007-07-03 also provided an optional terminating action for the repetitive tests. This AD requires repetitive inspections of all TADD material for damage and applicable on-condition actions. This AD was prompted by reports that high temperature composite material TADDs installed as specified in AD 2007-07-03 have also failed. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-10 · published Apr 7, 2021, effective May 12, 2021
MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), and CL-600-2D24 (Regional Jet Series 900) airplanes. This AD was prompted by a report that some piccolo ducts for the wing anti-ice system have bleed holes that do not conform to requirements. This AD requires, depending on airplane configuration, inspection for the presence of affected wing anti-ice system piccolo ducts and corrective actions, or replacement of affected piccolo ducts with new piccolo ducts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-09 · published Apr 8, 2021, effective Apr 23, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-323, -342, and -343 airplanes. This AD was prompted by the discovery of an erroneous value in some airplane data files that are used for performance computations in the airplane flight manual (AFM). This AD requires revising the existing AFM and applicable corresponding operational procedures, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-11 · published Apr 12, 2021, effective Apr 27, 2021
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of one or both roll control input modules (RCIMs) being incorrectly installed. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate certain aircraft maintenance manual (AMM) tasks. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-09-02 · published Apr 16, 2021, effective Apr 16, 2021
Piper Aircraft, Inc. Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-04-07 which applied to certain Piper Aircraft, Inc., (Piper) Models PA-46- 350P (Malibu Mirage), PA-46R-350T (Malibu Matrix), and PA-46-500TP (Malibu Meridian) airplanes. AD 2021-04-07 required identifying and correcting nonconforming stall warning heat control systems. Since AD 2021-04-07 was issued, the FAA was notified of an error in the stall warning heat control modification kit part number. This AD retains all of the actions in AD 2021-04-07 and corrects the incorrect modification kit part number. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-17 · published Apr 20, 2021, effective May 25, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-900ER series airplanes. This AD was prompted by reports of significant corrosion of electrical connectors located in the main landing gear (MLG) wheel well. This AD requires repetitive records checks to determine exposure to certain deicing fluids or repetitive inspections for corrosion of the electrical connectors, and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-03 · published Apr 20, 2021, effective May 25, 2021
MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702) airplanes; Model CL-600-2C11 (Regional Jet Series 550) airplanes; Model CL-600-2D15 (Regional Jet Series 705) airplanes; Model CL-600- 2D24 (Regional Jet Series 900) airplanes; and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a determination that a new or more restrictive airworthiness limitation is necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate a new or more restrictive airworthiness limitation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-06 · published Apr 20, 2021, effective May 25, 2021
Textron Aviation Inc. Airplanes
The FAA is superseding Airworthiness Directive (AD) 97-06-10 for certain Raytheon Aircraft Company (type certificate now held by Textron Aviation Inc. (Textron)) Model 76 airplanes. AD 97-06-10 required repetitively inspecting the main landing gear (MLG) "A" frame assemblies for cracks and replacing any cracked assembly. Since the FAA issued AD 97-06-10, the replacement parts have also experienced failure due to cracking. This AD requires magnetic particle inspections of the MLG "A" frame assemblies for cracks and replacement of the affected parts if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-08 · published Apr 20, 2021, effective May 25, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a report that a welding quality issue has been identified in the gimbal joint of the air bleed duct located at each wing-to-pylon interface; the inner ring of a gimbal had deformed to an oval shape, which could lead to cracking caused by direct contact between metal parts. This AD requires replacing affected bleed duct assemblies and bleed gimbals at the wing-to-pylon interface with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-10 · published Apr 20, 2021, effective May 25, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC- 10-30F (KC-10A and KDC-10), DC-10-40 and DC-10-40F airplanes; and Model MD-10-10F and MD-10-30F airplanes. This AD was prompted by a report that an operator found a crack in the upper flange of the pylon aft bulkhead bracket. This AD requires a general visual inspection of the left and right wing pylon at the aft bulkhead bracket for any lockbolt and collar; repetitive surface and open hole eddy current high frequency (ETHF) inspections of the left and right wing pylon at the aft bulkhead bracket for any cracking; and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-19 · published Apr 20, 2021, effective May 5, 2021
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-02- 19, which applied to certain The Boeing Company Model 787-8, -9, and - 10 airplanes. AD 2021-02-19 required repetitive general visual inspections for disengaged or damaged decompression panels of the bilge barriers located in the forward and aft cargo compartments, reinstallation of disengaged but undamaged panels, and replacement of damaged panels. This AD was prompted by reports of multiple incidents of torn decompression panels found in the bilge area, and the determination that additional airplanes are subject to the unsafe condition. This AD retains the requirements of AD 2021-02-19 and revises the applicability by including additional airplanes. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-04 · published Apr 21, 2021, effective May 26, 2021
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2013-07- 09, which applied to certain The Boeing Company Model 737-700, -700C, - 800, and -900ER series airplanes, Model 747-400F series airplanes, and Model 767-200 and -300 series airplanes. AD 2013-07-09 required a general visual inspection for affected serial numbers of the crew oxygen mask stowage box units, and replacement or re-identification as necessary. This AD retains the requirements of AD 2013-07-09 and expands the applicability. This AD was prompted by a determination that the affected parts may be installed on airplanes outside the original applicability of AD 2013-07-09. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-12 · published Apr 23, 2021, effective May 28, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by crack indications found in the lower aft wing skin bolt holes where the flap tracks attach to the track support fitting. This AD requires repetitive inspections for cracking of the left and right wing, lower aft wing skin aft edge, at certain flap track locations, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-13 · published Apr 26, 2021, effective Jun 1, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 series airplanes; Model A319-111, A319-112, A319- 113, A319-114, A319-115, A319-131, A319-132, and A319-133 airplanes; Model A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, and A320-233 airplanes; and Model A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, and A321-232 airplanes. This AD was prompted by reports that certain oxygen supply solenoid valves are a potential source of increased flow resistance within the flightcrew oxygen system. This AD requires a detailed inspection (flow test) of certain solenoid valves, and replacement if necessary, as specified in European Union Aviation Safety Agency (EASA) ADs, which are incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-09-01 · published Apr 26, 2021, effective Jun 1, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A320-271N, A321-211, and A321-271N airplanes. This AD was prompted by reports of missing overhead stowage compartment (OHSC) X-fixation brackets or brackets that were incorrectly installed during assembly. This AD requires a special detailed inspection of the OHSC X-fixation brackets for missing or incorrectly installed brackets, and installation or replacement the OHSC X-fixation brackets if necessary; or modification of each OHSC; as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-09-03 · published Apr 27, 2021, effective May 4, 2021
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is correcting an airworthiness directive (AD) that was published in the Federal Register. That AD applies to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. As published, two references to a Transport Canada Civil Aviation (TCCA) AD number specified in the regulatory text are incorrect. This document corrects those errors. In all other respects, the original document remains the same.
AD 2021-10-04 · published Apr 29, 2021, effective Apr 29, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A320, and A321 series airplanes. This AD was prompted by a potential quality issue in the fuel pump that includes a locking key of the impeller drive shaft found loose in the cavity under the impeller. This AD requires replacement of affected fuel pumps, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-09-08 · published Apr 30, 2021, effective Apr 30, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-8 and 737-9 airplanes. This AD was prompted by manufacturing design changes to certain metallic support panel assemblies installed in the flight deck, which resulted in insufficient electrical bonding of the panels and consequent insufficient electrical grounding of installed equipment. This AD requires modification of the electrical bonding of these assemblies to provide sufficient electrical grounding for equipment installed in the flight deck. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-04-21 · published Apr 2, 2021, effective May 7, 2021
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model EC120B helicopters. This AD was prompted by a report of broken and bent attachment bolts of the main rotor (MR) hub scissors assembly. This AD requires an inspection of the attachment bolts of the MR hub scissors assembly for discrepancies and repair if necessary; part marking of the attachment bolts of the MR hub scissors assembly; and repetitive inspections of the part marking of the attachment bolts, and repair if necessary; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-05-15 · published Apr 2, 2021, effective May 7, 2021
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters. This AD was prompted by a report that the cabin lateral sliding plug door failed its emergency jettisoning test; subsequent investigation revealed that the jettison handle cable interfered with the cable clamps. This AD requires modifying the release system of each cabin lateral sliding plug door, or modifying the design of the jettison system of each cabin lateral sliding plug door, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-05-19 · published Apr 2, 2021, effective May 7, 2021
Sikorsky Aircraft and Sikorsky Aircraft Corporation Helicopters
The FAA is adopting a new airworthiness directive (AD) for Sikorsky Aircraft Model S-61L, S-61N, S-61NM, and S-61R helicopters and Sikorsky Aircraft Corporation Model S-61A, S-61D, S-61E, and S-61V restricted category helicopters. This AD was prompted by the manufacturer determining that there may be arm assemblies in service that have accumulated 15,000 or more hours time-in-service (TIS), which exceeds the service life limit for this component. This AD requires reviewing the mixer unit component log card or equivalent record and, depending on the number of hours TIS, calculating the remaining life of the arm assembly or removing the arm assembly from service. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-05-21 · published Apr 2, 2021, effective May 7, 2021
Leonardo S.p.a. (Type Certificate Previously Held by Agusta S.p.A.) Helicopters
The FAA is superseding Airworthiness Directive (AD) 2017-23-08 for Agusta S.p.A. (now Leonardo S.p.a.) Model AB139 and AW139 helicopters. AD 2017-23-08 required repetitively inspecting the main rotor (M/R) rotating scissors, removing certain lower half scissor spherical bearings (bearings) from service, replacing the removed bearings with a new bearing, and installing a special nut. This new AD retains the requirements of AD 2017-23-08 and requires replacing each affected bearing with a certain part-numbered bearing. This AD was prompted by investigation results determining that a quality control issue may have affected the production of the affected bearings. The actions of this AD are intended to address an unsafe condition on these products.
AD 2021-06-05 · published Apr 2, 2021, effective May 7, 2021
Airbus Helicopters Deutschland GmbH Helicopters
The FAA is superseding Airworthiness Directive (AD) 2017-07-08 for Airbus Helicopters Deutschland GmbH (Airbus Helicopters) Model MBB- BK 117 D-2 helicopters. AD 2017-07-08 required repetitively inspecting each engine mount elastomeric bushing (elastomeric bushing). Since the FAA issued AD 2017-07-08, Airbus Helicopters has designed an improved engine mount metal bushing (metal bushing). This new AD retains the inspection requirements of AD 2017-07-08 and requires replacing each affected engine mount bushing with an improved engine mount bushing, while also requiring repetitive inspections of the improved engine mount bushing. This AD also prohibits installing an elastomeric bushing on any helicopter. The actions of this AD are intended to address an unsafe condition on these products.
AD 2021-07-15 · published Apr 2, 2021, effective May 7, 2021
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 82-20-05 for Societe Nationale Industrielle Aerospatiale (now Airbus Helicopters) Model AS-350 and AS-355 series helicopters. AD 82-20-05 required inspecting and establishing a life limit for the tail rotor (TR) drive shaft bearing (bearing). This new AD requires replacing certain part-numbered TR bearings with one part-numbered bearing and repetitively inspecting one part-numbered bearing. This AD was prompted by inconsistencies that have been identified between inspections and maintenance actions required by ADs and inspections and maintenance actions specified in the applicable maintenance manual. The actions of this AD are intended to address an unsafe condition on these products.
AD 2021-07-07 · published Apr 5, 2021, effective May 10, 2021
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model EC 155B and EC155B1 helicopters. This AD was prompted by a report of mechanical deformation of the protective cover of the "SHEAR" control pushbutton on the copilot collective stick. This AD requires replacement of the protective cover of the "SHEAR" control pushbutton on the pilot and copilot collective sticks and re- identification of the pilot and copilot collective sticks, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-12 · published Apr 6, 2021, effective May 11, 2021
Airbus Helicopters Deutschland GmbH Helicopters
The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Deutschland GmbH Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters. This AD was prompted by a reassessment of the flight control system. This AD requires modification of the cyclic stick, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-16 · published Apr 13, 2021, effective Apr 28, 2021
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. Model AB412 helicopters. This AD was prompted by a cracked spiral bevel gear. This AD requires a one-time visual inspection and a recurring fluorescent magnetic particle inspection (FMPI) of affected spiral bevel gears for a crack, and depending on the inspection results, removing the spiral bevel gear from service. This AD also prohibits installing an affected spiral bevel gear unless it has recently passed an FMPI. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-18 · published Apr 14, 2021, effective Apr 29, 2021
Sikorsky Aircraft Corporation Helicopters
The FAA is superseding Airworthiness Directive (AD) 2021-04-16 which applied to certain Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters. AD 2021-04-16 required a one-time inspection of the landing gear for components with non-conforming threads and removal of any non-conforming threaded hinge pin and main landing gear (MLG) and nose landing gear (NLG) actuator pins. AD 2021-04-16 also prohibited installing certain part-numbered hinge and actuator pins on any helicopter. This AD requires the same actions but corrects erroneous part numbers. This AD was prompted by the discovery that certain part numbers listed in AD 2021-04-16 are incorrect. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-09-07 · published Apr 23, 2021, effective May 10, 2021
Airbus Helicopters Deutschland GmbH Helicopters
The FAA is superseding Airworthiness Directive (AD) 2019-17- 02, which applied to certain Airbus Helicopters Deutschland GmbH (Airbus Helicopters) Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters. AD 2019-17-02 required inspecting certain part-numbered actuators for corrosion, removing them as necessary, and reporting certain information. This new AD continues to require inspecting certain part-numbered actuators, removing them as necessary, and reporting; and extends the compliance time for the initial inspection, expands the applicability, and includes new requirements for repetitive replacement of affected actuators; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by a hard landing of a helicopter and the discovery of a ruptured and displaced tie bar inside the piston of the longitudinal single-axis actuator of the main rotor actuator (MRA). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-05 · published Apr 26, 2021, effective Jun 1, 2021
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model SA341G and SA342J helicopters. This AD was prompted by the determination that a new life limit was necessary for certain tail rotor blades (TRBs). This AD requires replacing certain TRBs, re-identifying certain TRBs, and repairing certain other TRBs, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-16 · published Apr 26, 2021, effective May 11, 2021
PZL Swidnik S.A. Helicopters
The FAA is adopting a new airworthiness directive (AD) for PZL Swidnik S.A. (PZL) Model W-3A helicopters. This AD requires repetitive inspections of a certain part-numbered stainless steel cable (cable) installed on a certain part-numbered hoist assembly, and depending on those inspection results, removing certain parts from service and reporting the results. This AD also prohibits installing the affected part unless it is inspected per the AD requirements. This AD was prompted by wear of and damage to the cable near the swaged terminal due to movement of the hook assembly. The actions of this AD are intended to address an unsafe condition on these products.
AD 2021-08-17 · published Apr 27, 2021, effective May 12, 2021
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS332L2 helicopters. This AD was prompted by the discovery of a main gearbox (MGB) with worn ramps and broken roller cages. This AD requires installing a placard on the pilot instrument panel and replacing certain MGBs. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-09-05 · published Apr 28, 2021, effective Jun 2, 2021
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2016-08-20 for certain Airbus Helicopters (previously Eurocopter France) EC130B4 and EC130T2 helicopters. AD 2016-08-20 required repetitively inspecting the tail boom to Fenestron junction frame (junction frame) for a crack. This new AD continues to require inspecting the junction frame with the horizontal stabilizer removed, and expands the applicability, revises the compliance time and the inspection procedures for inspecting the junction frame, adds inspection procedures for certain helicopters, allows repair of the junction frame, and requires modifying and then repetitively inspecting the junction frame and reporting certain information. This AD was prompted by additional cracks and the availability of a design change that modifies the junction frame. The actions of this AD are intended to address an unsafe condition on these products.
AD 2021-05-16 · published Apr 2, 2021, effective May 7, 2021
Pratt & Whitney Division Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney Division (PW) PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, and PW4170 model turbofan engines. This AD was prompted by several reports of low-pressure turbine (LPT) 4th- stage vane cluster assemblies leaning back and notching into the rotating LPT 4th-stage blades, causing some blades to fracture and release. This AD requires initial and repetitive replacements of the LPT 4th-stage air sealing ring segment assemblies with parts eligible for installation. This AD also requires initial and repetitive dimensional inspections of the LPT case for bulging and, depending on the results of the dimensional inspections, repair or replacement of the LPT case. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-11 · published Apr 6, 2021, effective May 11, 2021
Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Trent 1000-A2, 1000- AE2, 1000-C2, 1000-CE2, 1000-D2, 1000-E2, 1000-G2, 1000-H2, 1000-J2, 1000-K2, and 1000-L2 model turbofan engines. This AD was prompted by the manufacturer's analysis which determined that cracks may initiate in the front seal fins and cause cracks in the low-pressure turbine (LPT) disk. This AD requires repetitive inspection of the seal fins and, depending on the results of the inspection, replacement of the LPT disk before further flight. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-01 · published Apr 15, 2021, effective Apr 30, 2021
Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) RB211 Trent 768-60, RB211 Trent 772-60, and RB211 Trent 772B-60 model turbofan engines. This AD was prompted by maintenance that resulted in damage to certain low-pressure compressor (LPC) blades, resulting in increased susceptibility to cracking in the LPC blade root. This AD requires initial and repetitive inspections of the blade root of certain LPC blades and re-lubrication of the LPC blades and LPC disk. Depending on the results of the inspections, this AD requires replacement of the LPC blades. As a terminating action to the inspection and re-lubrication requirements, this AD requires restoration of the LPC blade as well as examination and re-lubrication of the LPC disk. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-09-10 · published Apr 22, 2021, effective May 27, 2021
Pratt & Whitney Turbofan Engines
The FAA is superseding Airworthiness Directive (AD) 2012-04-15 for all Pratt & Whitney (PW) JT9D-3A, JT9D-7, JT9D-7A, JT9D-7AH, JT9D- 7F, JT9D-7H, JT9D-7J, JT9D-7Q, JT9D-7Q3, JT9D-7R4D, JT9D-7R4D1, JT9D- 7R4E, JT9D-7R4E1, JT9D-7R4E4, JT9D-7R4G2, JT9D-7R4H1, JT9D-20, JT9D- 20J, JT9D-59A, and JT9D-70A (JT9D) model turbofan engines. AD 2012-04- 15 required revisions to the Airworthiness Limitations Section (ALS) of the manufacturer's Instructions for Continued Airworthiness (ICA) to include required enhanced inspection of selected critical life-limited parts at each piece-part opportunity. AD 2012-04-15 also required additional revisions to the ALS of the manufacturer's ICA for JT9D model turbofan engines. This AD requires revising the required inspections of selected critical life-limited parts specified in the ALS of the manufacturer's ICA and, for air carriers, to the existing continuous airworthiness air carrier maintenance program (CAMP). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-09-04 · published Apr 23, 2021, effective May 10, 2021
Austro Engine GmbH Engines
The FAA is adopting a new airworthiness directive (AD) for all Austro Engine GmbH E4 and E4P model diesel piston engines. This AD was prompted by reports of an oil pump blockage on E4 model diesel piston engines. This AD requires replacing a certain oil pump as well as the oil filter and engine oil. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-07-13 · published Apr 6, 2021, effective May 11, 2021
Pacific Scientific Company Seat Restraint System Rotary Buckle Assemblies
The FAA is adopting a new airworthiness directive (AD) for certain Pacific Scientific Company rotary buckle assemblies (buckles). This AD requires inspecting each buckle including its buckle handle vane, and depending on the results, removing the buckle from service and installing an airworthy buckle. This AD also prohibits installing the affected buckles. This AD was prompted by several reports of cracked buckle handles. The actions of this AD are intended to address an unsafe condition on these products.
AD 2021-08-07 · published Apr 7, 2021, effective May 12, 2021
Rockwell Collins, Inc., Global Positioning Systems
The FAA is adopting a new airworthiness directive (AD) for certain Rockwell Collins, Inc. (Rockwell Collins), GPS-4000S Global Positioning Systems (GPS) installed on airplanes. This AD was prompted by an un-annunciated GPS position error, which could cause a misleading localizer performance with vertical guidance (LPV) glidepath, resulting in controlled flight into terrain (CFIT). This AD requires upgrading the GPS-4000S. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-08-15 · published Apr 12, 2021, effective May 17, 2021
Garmin International GMN-00962 GTS Processor Units
The FAA is adopting a new airworthiness directive (AD) for certain Garmin International (Garmin) GMN-00962 GTS processor units (GTS 825, GTS 855, GTS 8000). This AD was prompted by reports of GTS processor units issuing resolution advisories (RAs) when no risk of collision or loss of separation exists between the airplanes involved. This AD requires updating the software version of the affected GTS Processor units. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-09-09 · published Apr 22, 2021, effective May 7, 2021
Uninsured United Parachute Technologies, LLC Parachutes
The FAA is adopting a new airworthiness directive (AD) for certain Uninsured United Parachute Technologies, LLC (UPT) parachutes. This AD results from reserve pin covers (RPCs) catching on the parachute container flaps and preventing the reserve parachute from deploying. This AD requires modifying the RPC before the next parachute jump and replacing the RPC at the next reserve parachute packing. The FAA is issuing this AD to address the unsafe condition on these products.
