40 Airworthiness Directives: 27 airplane, 4 rotorcraft, 7 engine, 2 appliance.
AD 2016-07-10 · published Apr 1, 2016, effective Apr 14, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 787-8 and 787-9 airplanes. This AD requires revising the airplane flight manual (AFM) to instruct the flightcrew to avoid abrupt flight control inputs in response to sudden drops in airspeed, and to reinforce the need to disconnect the autopilot before making any manual flight control inputs. This AD was prompted by reports indicating that in certain weather conditions with high moisture content or possible icing, erroneous low airspeed may be displayed to the flightcrew before detection and annunciation via engine-indicating and crew-alerting system (EICAS) messages. We are issuing this AD to ensure that the flightcrew avoids abrupt pilot control inputs in response to an unrealistic, sudden drop in displayed airspeed at high actual airspeed. Abrupt pilot control inputs in this condition could exceed the structural capability of the airplane.
AD 2016-07-04 · published Apr 5, 2016, effective May 10, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A318, A319, A320, and A321 series airplanes. This AD was prompted by a report that, during the assembly process, several gaps between the two parts of the girt bar fittings for the aft passenger doors were found to exceed tolerances. This AD requires an inspection of the gap between the two parts of the girt bar fittings on left-hand (LH) and right-hand (RH) aft passenger doors, and corrective actions if necessary. We are issuing this AD to detect and correct incorrect gaps between the girt bar fittings. Detachment of a girt bar could lead to the separation of the slide or slide-raft from the fuselage, making the emergency exit inoperative, which could impede an emergency evacuation.
AD 2016-07-07 · published Apr 5, 2016, effective May 10, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757 airplanes. This AD was prompted by fuel system reviews conducted by the manufacturer. This AD requires modifying the fuel quantity indication system (FQIS) wiring to prevent development of an ignition source inside the center fuel tank. We are issuing this AD to prevent ignition sources inside the center fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
AD 2016-07-08 · published Apr 5, 2016, effective Apr 20, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for a certain The Boeing Company Model DC-9-83 (MD-83) airplane. This AD requires installing fuel level float and pressure switch in-line fuses, and doing applicable wiring changes, on the left, right, and center wing forward spars, forward auxiliary fuel tank, and aft auxiliary fuel tank. This AD was prompted by fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
AD 2016-07-12 · published Apr 5, 2016, effective May 10, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A318, A319, A320, and A321 series airplanes. This AD was prompted by reports of cracking of the aft fixed fairing (AFF) of the pylons due to fatigue damage of the structure. This AD requires repetitive inspections for damage and cracking of the AFF of the pylons, and repair if necessary. We are issuing this AD to detect and correct damage and cracking of the AFF of the pylons, which could result in detachment of a pylon and consequent reduced structural integrity of the airplane.
AD 2016-07-16 · published Apr 7, 2016, effective May 12, 2016
The Boeing Company Airplanes
We are superseding Airworthiness Directive (AD) 2013-26-08 for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. AD 2013-26-08 required inspecting the orientation of both sides of the coil cord connector keyways of the number 2 windows on the flight deck; re-clocking the connector keyways, if necessary; and replacing the coil cord assemblies on both number 2 windows on the flight deck. This new AD adds airplanes to the applicability. AD 2013-26-08 resulted from reports of arcing and smoke at the left number 2 window in the flight deck. This AD was prompted by a determination that additional airplanes are subject to the same identified unsafe condition. We are issuing this AD to prevent arcing, smoke, and fire in the flight deck, which could lead to injuries to or incapacitation of the flightcrew.
AD 2016-07-09 · published Apr 11, 2016, effective May 16, 2016
BAE SYSTEMS (Operations) Limited Airplanes
We are superseding Airworthiness Directive (AD) 2011-21-06 for all BAE SYSTEMS (Operations) Limited Model 4101 airplanes. AD 2011-21- 06 required revising the maintenance program. This new AD requires a new revision of the maintenance or inspection program. This AD was prompted by a determination that the life limit of certain main landing gear components must be reduced, and certain post-repair inspections of critical structure are necessary. We are issuing this AD to prevent failure of certain structurally significant items, including the main landing gear and nose landing gear, which could result in reduced structural integrity of the airplane; and to prevent fuel vapor ignition sources, which could result in a fuel tank explosion and consequent loss of the airplane.
AD 2016-07-14 · published Apr 11, 2016, effective May 16, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A319, A320, and A321 series airplanes. This AD is intended to complete certain mandated programs intended to support the airplane reaching its limit of validity (LOV) of the engineering data that support the established structural maintenance program. This AD was prompted by fatigue testing that determined fatigue damage could appear on clips, shear webs, and angles at certain rear fuselage sections and certain frames. This AD requires replacing the clips, shear webs, and angles, including doing all applicable related investigative actions, and repair if necessary. We are issuing this AD to prevent fatigue damage on the clips, shear webs, and angles; such damage could affect the structural integrity of the airplane.
AD 2016-07-15 · published Apr 11, 2016, effective May 16, 2016
Dassault Aviation Airplanes
We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X airplanes. This AD was prompted by a fuel leak that occurred in the baggage compartment during fuel system pressurization. This AD requires opening the fuel boxes and restoring the sealing. We are issuing this AD to prevent failure of a connector or coupling on a fuel line, which, in combination with a leak in the corresponding enclosure (i.e., fuel box), could result in a fire in the baggage compartment and affect the safe flight of the airplane.
AD 2016-07-17 · published Apr 11, 2016, effective May 16, 2016
Airbus Airplanes
We are superseding Airworthiness Directive (AD) 97-20-07 for certain Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). AD 97-20-07 required repetitive inspections to detect fatigue cracking in the left and right wings in the area where the top skin attaches to the center spar, and repair or modification of this area if necessary. This new AD reduces the inspection compliance time and repetitive inspection intervals. This AD was prompted by a determination that the inspection compliance time and repetitive inspection interval must be reduced to allow timely detection of fatigue cracking in the left and right wings in the area where the top skin attaches to the center spar. We are issuing this AD to detect and correct this fatigue cracking, which could reduce the residual strength of the top skin of the wings, and consequently affect the structural integrity of the airframe.
AD 2016-07-18 · published Apr 11, 2016, effective May 16, 2016
Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Defense and Space S.A. Model CN-235-200 and CN-235-300 airplanes. This AD was prompted by reports of false engine fire warning events, which consequently led to engine in-flight shutdowns. This AD requires modification of the location and routing of the engine fire detection system. We are issuing this AD to prevent unnecessary engine in-flight shutdown, which could result in reduced controllability of the airplane.
AD 2016-07-20 · published Apr 11, 2016, effective May 16, 2016
Airbus Airplanes
We are superseding Airworthiness Directive (AD) 95-18-08 for all Airbus Model A300-600 series airplanes. AD 95-18-08 required repetitive inspections to detect cracks in the bottom skin of the wing in the area of the cut-out for the pylon rear attachment fitting, and repair if necessary. This new AD, for certain airplanes, reduces the compliance times for the inspections. This AD was prompted by a report that updated fatigue and damage tolerance analyses and a fleet survey found that certain inspection thresholds and intervals must be reduced to allow more timely findings of cracking. We are issuing this AD to detect and correct fatigue-related cracking in the bottom skin of the wing in the area of the cut-out for the pylon rear attachment fitting, which could result in reduced structural integrity of the wing.
AD 2016-07-21 · published Apr 11, 2016, effective Apr 26, 2016
Piper Aircraft, Inc. Airplanes
We are superseding Airworthiness Directive (AD) 2015-20-13 for certain Piper Aircraft, Inc. Models PA-28-161, PA-28-181, and PA-28R- 201 airplanes. AD 2015-20-13 required inspecting the right wing rib at wing station 140.09 for cracks and taking necessary corrective action. This AD retains the actions for AD 2015-20-13 and adds airplanes to the applicability. This AD was prompted by reports that additional airplanes have been found with the same cracks. We are issuing this AD to correct the unsafe condition on these products.
AD 2016-07-22 · published Apr 11, 2016, effective May 16, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes), and Model A310 series airplanes. This AD was prompted by reports of insufficient clearance for the electrical wiring bundles in the leading and trailing edges of the right-hand (RH) and left-hand (LH) wings. This AD requires modifying the electrical routing installation at the RH and LH wings. We are issuing this AD to prevent insufficient clearance of electrical wiring bundles located in the leading and trailing edges of the RH and LH wings, which could lead to chafing damage and arcing, possibly resulting in an on-board fire.
AD 2016-07-24 · published Apr 11, 2016, effective Apr 26, 2016
Textron Aviation, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for all Textron Aviation, Inc. Models 310 through 310R, E310H, E310J, T310P through T310R, 310J-1, 320 through 320F, 320-1, 335, 340, 340A, 401 through 401B, 402 through 402C, 411, 411A, 414, 414A, and 421 through 421C airplanes (type certificates 3A10, 3A25, and A7CE previously held by Cessna Aircraft Company). This AD requires replacement and repetitive inspections of the hardware securing the elevator trim push-pull rod. This AD was prompted by lessons learned in accident investigation support, analysis of past accidents, and NTSB determinations of probable cause. That information indicates that following the loss of the attachment hardware connecting the elevator trim tab actuator to the elevator trim tab push-pull rod, the elevator tab may jam in a position outside the normal limits of travel. We are issuing this AD to correct the unsafe condition on these products.
AD 2016-07-28 · published Apr 11, 2016, effective Apr 26, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), and DC-9-87 (MD-87) airplanes, and Model MD-88 airplanes. This AD requires repetitive eddy current high frequency (ETHF) inspections for any cracking in the left and right side center wing lower skin, and corrective actions if necessary. This AD was prompted by reports of cracking at certain stringers, associated end fittings, and skins in the center wing fuel tank where the stringers meet the end fittings. We are issuing this AD to detect and correct cracking in the center wing lower skin. Such cracking could cause structural failure of the wings.
AD 2016-07-25 · published Apr 13, 2016, effective May 18, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This AD was prompted by reports indicating that the ram air turbine (RAT) assembly may fail to operate if deployed at low airspeeds. This AD requires replacing either the RAT pump and control module assembly or the entire RAT assembly. We are issuing this AD to prevent failure of the RAT assembly to operate at low air speeds. The volume fuse on the RAT assembly may be activated in-flight before the RAT is deployed. This may lead to improper pump hydraulic pressure offloading when the RAT is needed. Failure of the RAT to operate in an all engine out event would result in loss of control of the airplane.
AD 2016-07-30 · published Apr 13, 2016, effective May 18, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A330-200, -200 Freighter, and -300 series airplanes, and all Airbus Model A340-200, -300, -500, and -600 series airplanes. This AD was prompted by a report of blockage of Angle of Attack (AOA) probes during climb, leading to activation of the Alpha Protection (Alpha Prot) while the Mach number increased. This activation could cause a continuous nose-down pitch rate that cannot be stopped with backward sidestick input, even in the full backward position. For certain airplanes, this AD requires replacing certain AOA sensors (probes) with certain new AOA sensors. For certain other airplanes, this AD also requires inspections and functional heat testing of certain AOA sensors for discrepancies, and replacement if necessary. We are issuing this AD to prevent erroneous AOA information and Alpha Prot activation due to blocked AOA probes, which could result in a continuous nose-down command and loss of control of the airplane.
AD 2016-07-31 · published Apr 13, 2016, effective May 18, 2016
The Boeing Company Airplanes
We are superseding Airworthiness Directive (AD) 2013-22-11 for certain The Boeing Company Model 747-400 and -400D series airplanes. AD 2013-22-11 required repetitive inspections to detect cracks in the floor panel attachment fastener holes of certain upper deck floor beam upper chords, repetitive inspections, corrective actions if necessary, and replacement of the upper deck floor beam upper chords. Since we issued AD 2013-22-11, we received a report that certain fastener holes in the upper deck floor beam upper chords may not have been inspected in accordance with AD 2013-22-11. This AD adds additional repetitive inspections for cracks for certain airplanes, and corrective actions if necessary. We are issuing this AD to detect and correct fatigue cracking in certain upper chords of the upper deck floor beam. Such cracks could become large and cause the floor beams to become severed and result in rapid decompression or reduced controllability of the airplane.
AD 2016-08-03 · published Apr 13, 2016, effective May 18, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. This AD was prompted by reports of fractured forward attach fittings of the inboard flap outboard aft flap track. The fractured fittings were determined to be the result of corrosion pits forming on the inside diameter of the fittings. This AD requires an inspection for the affected part number and serial number of the main flap; various additional repetitive inspections of the fitting, if necessary; and replacement of the fitting or nested bushing installation, if necessary, which would terminate the inspections. This AD also provides an optional terminating action for the repetitive inspections. We are issuing this AD to detect and correct fracture of the fitting, which could result in the loss of the inboard aft flap and could lead to a punctured fuselage, causing injury to the flightcrew and passengers, and damage to the airplane.
AD 2016-08-04 · published Apr 13, 2016, effective May 18, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-223F and -243F airplanes. This AD was prompted by a report of missing fasteners in certain locations of the fuselage during production. This AD would require inspecting for missing, damaged, or incorrectly installed fasteners; and corrective actions if necessary. We are issuing this AD to detect and correct cracking of the fuselage due to missing, damaged, or incorrectly installed fasteners, which could result in reduced structural integrity of the fuselage.
AD 2016-08-05 · published Apr 13, 2016, effective May 18, 2016
Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, Model CL-600-2D24 (Regional Jet Series 900) airplanes, and Model CL- 600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by the discovery of a number of incorrectly calibrated angle of attack (AOA) transducers installed in the stall protection system. This AD requires replacement of affected AOA transducers. We are issuing this AD to detect and replace incorrectly calibrated AOA transducers; incorrect calibration of the transducers could result in late activation of the stick pusher.
AD 2016-08-06 · published Apr 13, 2016, effective May 18, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300- 600 series airplanes), modified by a particular supplemental type certificate (STC). This AD was prompted by a report of chafing found on the overflow sensor harness of the surge tank, and subsequent contact between the electrical wiring and fuel tank structure. This AD requires a one-time inspection for damage of the outer tank overflow sensor harness, and repair if necessary. This AD also requires modification of the sensor harness. We are issuing this AD to prevent chafing of the harness and subsequent contact between the electrical wiring and fuel tank structure, which could result in electrical arcing and a fuel tank explosion.
AD 2016-08-08 · published Apr 13, 2016, effective May 18, 2016
SOCATA Airplanes
We are superseding airworthiness directive (AD) 92-06-10 for SOCATA Models MS 880B, MS 885, MS 892A-150, MS 892E-150, MS 893A, MS 893E, MS 894A, MS 894E, Rallye 100S, Rallye 150ST, Rallye 150T, Rallye 235E, and Rallye 235C airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as fatigue failure of the nose landing gear wheel axle. We are issuing this AD to require actions to address the unsafe condition on these products.
AD 2016-08-11 · published Apr 22, 2016, effective May 27, 2016
The Boeing Company Airplanes
We are superseding Airworthiness Directive (AD) 2012-17-13, which applied to certain The Boeing Company Model 707 airplanes, and Model 720 and 720B series airplanes. For certain airplanes, AD 2012-17- 13 required using redefined flight cycle counts; determining the type of material of the horizontal stabilizer, rear spar, and upper and lower chords on the inboard and outboard ends of the rear spar; repetitively inspecting for cracking of the horizontal stabilizer components; and repairing or replacing the chord, or modifying chord segments made of 7079 aluminum, if necessary. For all airplanes, AD 2012-17-13 required inspecting certain structurally significant items, and repairing discrepancies if necessary. This new AD adds a requirement to replace all chord segments made of 7079 aluminum with new, improved chord segments made of 7075 aluminum. This AD was prompted by a determination that all chord segments made of 7079 aluminum must be replaced with new, improved chord segments made of 7075 aluminum. We are issuing this AD to detect and correct stress corrosion and potential early fatigue cracking in the horizontal stabilizer, which could result in reduced structural integrity of the horizontal stabilizer.
AD 2016-08-12 · published Apr 22, 2016, effective May 9, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for The Boeing Company Model 787-8 and 787-9 airplanes powered by General Electric (GE) GEnx-1B engines. This AD requires revising the airplane flight manual (AFM) to provide the flight crew a revised fan ice removal procedure and a new associated mandatory flight crew briefing to reduce the likelihood of engine damage due to fan ice shedding. This AD also removes certain dispatch relief. For airplanes with certain engines, this AD also requires reworking or replacing at least one engine. This AD was prompted by a recent engine fan blade rub event that caused an in-flight non-restartable power loss. We are issuing this AD to prevent susceptibility to heavy fan blade rubs, which could result in engine damage and a possible in-flight non-restartable power loss of one or both engines.
AD 2016-08-14 · published Apr 26, 2016, effective May 31, 2016
Airbus Airplanes
We are superseding Airworthiness Directive (AD) 2014-03-14 for all Airbus Model A330-200 and -300 series airplanes, and Model A340- 200, -300, -500, and -600 series airplanes. AD 2014-03-14 required removing bulb-type maintenance lights; installing a drain mast on certain airplanes; and installing muffs on connecting bleed elements on certain airplanes. For certain Model A340-200 and -300 series airplanes, this new AD also requires replacing certain insulation sleeves with new insulation sleeves. This AD results from fuel system reviews conducted by the airplane manufacturer. We are issuing this AD to prevent ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
AD 2016-07-26 · published Apr 11, 2016, effective May 16, 2016
Airbus Helicopters (previously Eurocopter France)
We are superseding Airworthiness Directive (AD) 2010-23-02 for Eurocopter France (now Airbus Helicopters) Model SA-365N, SA-365N1, AS- 365N2, and AS 365 N3 helicopters. AD 2010-23-02 required amending the Limitations section of the Rotorcraft Flight Manual (RFM) to limit the never-exceed velocity (VNE) to 150 Knots Indicated Air Speed (KIAS) and to add a 1,500 ft/minute rate of descent (R/D) limitation beyond 140 KIAS. Since we issued AD 2010-23-02, a design change designated as modification (MOD) 0755B28 improved the dynamic behavior of the horizontal stabilizer such that AD actions are not required. This new AD retains the requirements of AD 2010-23-01 and revises the applicability to exclude helicopters with MOD 0755B28. We are issuing this AD to exclude certain helicopters from the applicability and restrict the VNE on other helicopters to prevent failure of the horizontal stabilizer and subsequent loss of control of the helicopter.
AD 2016-07-29 · published Apr 11, 2016, effective May 16, 2016
Airbus Helicopters (Previously Eurocopter France) Helicopters
We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model EC225LP, AS332C, AS332L, AS332L1, and AS332L2 helicopters. This AD requires inspecting each TECALEMIT flexible hydraulic hose (hose) installed in the main gearbox (MGB) compartment and replacing the hose if a crack, cut, or other damage exists. This AD was prompted by reports about the loss of in-flight hydraulic pressure on Eurocopter France helicopters. The actions of this AD are intended to prevent loss of the hydraulic system and consequently, loss of helicopter control.
AD 2016-07-27 · published Apr 13, 2016, effective May 18, 2016
Airbus Helicopters (formerly Eurocopter France)
We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model SA341G and SA342J helicopters. This AD requires repetitive inspections of a certain part-numbered main rotor hub torsion bar (torsion bar). This AD was prompted by several cases of corrosion in the metal strands of the torsion bar. The actions of this AD are intended to detect corrosion and prevent failure of the torsion bar, loss of a main rotor blade, and subsequent loss of control of the helicopter.
AD 2016-08-17 · published Apr 25, 2016, effective May 31, 2016
Bell Helicopter Textron Canada Helicopters
We are superseding Airworthiness Directive (AD) 2010-19-51 for Bell Helicopter Textron Canada (Bell) Model 222, 222B, 222U, 230, and 430 helicopters. AD 2010-19-51 required inspecting parts of the main rotor hydraulic servo actuator (servo actuator) for certain conditions and replacing any unairworthy parts before further flight. This new AD requires installing a servo actuator with a new stainless steel piston rod. This AD was prompted by a collective servo actuator malfunction. We are issuing this AD to detect corrosion on a piston rod, which could result in failure of the servo actuator and consequent loss of helicopter control.
AD 2016-06-14 · published Apr 4, 2016, effective May 9, 2016
General Electric Company Turbofan Engines
We are adopting a new airworthiness directive (AD) for all General Electric Company (GE) CF6-80E1 turbofan engines with rotating compressor discharge pressure (CDP) seal, part number (P/N) 1669M73P02, installed. This AD was prompted by reports from the manufacturer of cracks in the teeth of two rotating CDP seals found during engine shop visits. This AD requires stripping of the coating, inspecting, and recoating the teeth of the affected rotating CDP seals. We are issuing this AD to prevent cracking of the CDP seal teeth, uncontained part release, damage to the engine, and damage to the airplane.
AD 2016-07-19 · published Apr 4, 2016, effective May 9, 2016
Technify Motors GmbH Reciprocating Engines
We are adopting a new airworthiness directive (AD) for certain Technify Motors GmbH (type certificate previously held by Thielert Aircraft Engines GmbH) TAE 125-02-99 and TAE 125-02-114 reciprocating engines. This AD requires removal of affected fuel feed pumps. This AD was prompted by reports of in-flight shutdowns on TAE 125-02 engines. We are issuing this AD to prevent failure of the fuel feed pump, damage to the engine, and damage to the airplane.
AD 2016-07-13 · published Apr 7, 2016, effective Apr 22, 2016
GE Aviation Czech s.r.o. Turboprop Engines
We are adopting a new airworthiness directive (AD) for certain GE Aviation Czech s.r.o. M601E-11 turboprop engines. This AD requires inspection of the engine power turbine (PT) disk and, if found damaged, its replacement with a part eligible for installation. This AD was prompted by discovery of damage to certain engine PT disks during engine shop visits. We are issuing this AD to prevent failure of the engine PT disk, which could result in release of high-energy debris, damage to the engine, and reduced control of the airplane.
AD 2016-08-07 · published Apr 11, 2016, effective May 16, 2016
Rolls-Royce plc Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Rolls-Royce plc (RR) RB211-22B and RB211-524 turbofan engines with low- pressure turbine (LPT) support roller bearing, part number (P/N) LK30313 or P/N UL29651, installed. This AD requires removal of certain LPT support roller bearings installed in RR RB211-22B and RB211-524 engines. This AD was prompted by a report of a breach of the turbine casing and release of engine debris through a hole in the engine nacelle. We are issuing this AD to prevent failure of the LPT support roller bearing, loss of radial position following LPT blade failure, uncontained part release, damage to the engine, and damage to the airplane.
AD 2016-08-16 · published Apr 20, 2016, effective May 25, 2016
Turbomeca S.A. Turboshaft Engines
We are adopting a new airworthiness directive (AD) for all Turbomeca S.A. Arriel 2E turboshaft engines. This AD requires removing the pre-TU 193 adjusted high-pressure/low-pressure pump and metering valve assembly and replacing it with a part that is eligible for installation. This AD also requires replacing the constant delta- pressure (delta-P) diaphragm of the fuel metering valve. This AD was prompted by reports of fuel flow non-conformities found during acceptance tests of Arriel 2E hydro-mechanical metering units (HMUs). We are issuing this AD to prevent failure of the delta-P diaphragm, which could result in an uncommanded in-flight shutdown and damage to the helicopter.
AD 2016-08-09 · published Apr 27, 2016, effective Jun 1, 2016
Pratt & Whitney Division Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Pratt & Whitney Division (PW) PW4000-94 inch and PW4000-100 inch model turbofan engines. This AD was prompted by a report of a crack found in the high-pressure compressor (HPC) 10th stage disk. This AD requires performing an ultrasonic inspection (USI) or an eddy current inspection (ECI) of the HPC 10th stage disk. We are issuing this AD to prevent failure of the HPC 10th stage disk, uncontained disk release, damage to the engine, and damage to the airplane.
AD 2016-08-10 · published Apr 27, 2016, effective Jun 1, 2016
General Electric Company Turbofan Engines
We are adopting a new airworthiness directive (AD) for all General Electric Company (GE) CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6- 80C2A5, CF6-80C2A5F, CF6-80C2A8, CF6-80C2B1, CF6-80C2B1F, CF6-80C2B1F1, CF6-80C2B1F2, CF6-80C2B2, CF6-80C2B2F, CF6-80C2B3F, CF6-80C2B4, CF6- 80C2B4F, CF6-80C2B5F, CF6-80C2B6, CF6-80C2B6F, CF6-80C2B6FA, CF6- 80C2B7F, CF6-80C2B8F, CF6-80C2D1F, CF6-80C2L1F, CF6-80C2K1F and CF6- 80E1A1, CF6-80E1A2, CF6-80E1A3, CF6-80E1A4, and CF6-80E1A4/B turbofan engines. This AD was prompted by reports of a burn-through of the accessory heat shield during an engine fire, propagating the fire into the accessory compartment and igniting additional flammable fuel source. This AD requires replacing the accessory heat shield assembly. We are issuing this AD to prevent fires from propagating into the accessory compartment, resulting in an uncontrolled engine fire, and damage to the airplane.
AD 2016-08-21 · published Apr 25, 2016, effective May 31, 2016
Kaman Aerospace Corporation
We are adopting a new airworthiness directive (AD) for Kaman Aerospace Corporation (Kaman) Model K-1200 helicopters. This AD requires revising the "Flight Limitations--NO LOAD" and "Flight Limitations-- LOAD" sections of the rotorcraft flight manual (RFM). This AD was prompted by a report of certain flight maneuvers that may lead to main rotor (M/R) blade to opposing hub contact. These actions are intended to prevent damage to the M/R flight controls and subsequent loss of control of the helicopter.
AD 2016-08-01 · published Apr 26, 2016, effective May 31, 2016
Dassault Aviation
We are adopting a new airworthiness directive (AD) for all Dassault Aviation Model FALCON 7X airplanes. This AD was prompted by reports of multiple cases of ram air turbine (RAT) blade damage. This AD requires deployment of the RAT, replacement of the RAT placard with a new RAT placard, and re-identification of the RAT. We are issuing this AD to prevent blade damage to the RAT, which could prevent RAT deployment in flight during an emergency, possibly resulting in reduced control of the airplane.
