24 Airworthiness Directives: 7 airplane, 15 rotorcraft, 2 engine.
AD 2025-05-14 · published Apr 1, 2025, effective Apr 22, 2025
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and A350-1041 airplanes. This AD was prompted by a report indicating that the thrust reverser and pylon thermal blankets were found damaged due to air leaking from the pre-cooler exchanger (PCE). This AD requires repetitively testing the PCE for air leaks and reporting the results, and, depending on findings, inspecting the thermal blankets for damage and replacing the PCE, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-06-08 · published Apr 3, 2025, effective May 8, 2025
Deutsche Aircraft GmbH (Type Certificate Previously Held by 328 Support Services GmbH; AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Deutsche Aircraft GmbH (Type Certificate previously held by 328 Support Services GmbH; AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Model 328-100 and Model 328-300 airplanes. This AD was prompted by a report of a nose landing gear (NLG) uplock bracket assembly cracking. This AD requires an inspection of the affected part and applicable on-condition actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-05-10 · published Apr 8, 2025, effective May 13, 2025
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2012-07- 06, which applied to certain The Boeing Company Model 777-200, -200LR, -300, -300ER, and 777F series airplanes. AD 2012-07-06 required revising the maintenance program to update inspection requirements to detect fatigue cracking of principal structural elements (PSEs). This AD was prompted by new revisions to the airworthiness limitations of the maintenance planning document and damage tolerance rating check form document. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-07-03 · published Apr 8, 2025, effective May 13, 2025
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-09- 06, which applied to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. AD 2021-09-06 required repetitive inspections for cracking of the left- and right-hand outboard chords of certain frame fittings and failsafe straps at a certain station around eight fasteners, and repair if any cracking is found. This AD was prompted by additional reports of cracking in the area and a subsequent determination that additional inspections are needed to address the unsafe condition. This AD requires repetitive detailed and ultrasonic inspections for cracking of the left- and right-hand sides of certain frame fittings and failsafe straps, and repair if any cracking is found. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-07-05 · published Apr 8, 2025, effective May 13, 2025
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by an updated stress analysis on the forward (FWD) cargo door and its attachment piano hinges that revealed a risk of cracking and crack propagation on piano hinges 2 and 3, originating from opening- closing fatigue cycles of the FWD cargo door. This AD requires an inspection of the affected parts, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-07-04 · published Apr 22, 2025, effective May 27, 2025
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus Canada Limited Partnership Model BD-500-1A11 airplanes. This AD was prompted by a design review of aircraft structural and stress reports that resulted in a revision of operational loads for some aircraft flight phases. This AD requires a review and disposition of all existing repairs and damage assessments for affected structure, corrective actions if necessary, and the prohibition of certain repair engineering orders (REOs), as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-09-07 · published Apr 30, 2025, effective May 15, 2025
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -243F, -841, and -941 airplanes. This AD was prompted by reports of loss of data synchronization between radio management panels (RMPs) and the audio management unit (AMU). This AD requires revising the existing airplane flight manual (AFM) by providing instructions to address dual loss of RMP data synchronization, and the existing minimum equipment list (MEL) by removing relief for an inoperative RMP 3. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-05-12 · published Apr 3, 2025, effective May 8, 2025
Airbus Helicopters (Type Certificate Previously Held by Eurocopter France)
The FAA is superseding Airworthiness Directive (AD) 2008-10-01 and AD 2010-05-51, which applied to certain Eurocopter France (now Airbus Helicopters) Model EC120B helicopters. AD 2008-10-01 required replacing certain part-numbered and serial-numbered spherical thrust bearings. AD 2010-05-51 required repetitively inspecting the main rotor (M/R) head rotor hub (rotor hub) and, depending on the results, taking corrective action. Since the FAA issued those ADs, the manufacturer revised the airworthiness limitations section (ALS) to incorporate various airworthiness limitations, tasks, and associated thresholds and intervals that were previously contained in service bulletins, as well as incorporate a new task. This AD requires revising the ALS of the existing maintenance manual (MM) or instructions for continued airworthiness (ICAs) and the existing approved maintenance or inspection program, as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-06-07 · published Apr 3, 2025, effective Apr 18, 2025
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model AS332C1 helicopters. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICAs) and the existing approved maintenance or inspection program, as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-05-08 · published Apr 4, 2025, effective Apr 21, 2025
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model AS332L1 and EC225LP helicopters. This AD was prompted by a determination of a possible interference of the hoist operator's helmet cord with the toggle switch of the hoist cable cut control. This AD requires replacing, or modifying and re- identifying, certain hoist shear toggle switch supports, and prohibits installing certain hoist shear toggle switch supports, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-05-09 · published Apr 4, 2025, effective May 9, 2025
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model SA330J helicopters. This AD was prompted by the determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance records by incorporating new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-06-04 · published Apr 4, 2025, effective May 9, 2025
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters (Airbus) Model AS350B, AS350B1, AS350B2, AS350B3, AS350BA, AS350D, AS355E, AS355F, AS355F1, AS355F2, AS355N, AS355NP, EC130B4, and EC130T2 helicopters. This AD was prompted by a manufacturer assessment that determined additional actions are necessary to improve particle detection for main gearboxes (MGBs) with certain planet gear bearings installed. This AD requires repetitively inspecting the MGB bevel wheel and the MGB magnetic plug for particles and prohibits installing an affected MGB unless certain requirements are met. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-05-05 · published Apr 7, 2025, effective May 12, 2025
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model SA341G and SA342J helicopters. This AD was prompted by a report of a pilot collective pitch stick handle grip that broke when pulled. This AD requires replacing certain pilot collective pitch stick handle grips and prohibits installing those pilot collective pitch stick handle grips. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-06-51 · published Apr 10, 2025, effective Apr 25, 2025
Bell Textron Canada Limited Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Canada Limited (Bell) Model 505 helicopters. The FAA previously sent this AD as an emergency AD to all known U.S. owners and operators of these helicopters. This AD was prompted by deformation and/or improper pin engagement in the knuckles of the door hinge on the aft movable ballast box assembly. This AD requires removing all ballast weights from the aft movable ballast box assembly and prohibits the use of ballast weights within the aft movable ballast box assembly, as specified in a Transport Canada emergency AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-07-06 · published Apr 10, 2025, effective Apr 25, 2025
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2024-26- 01, which applied to all Airbus Helicopters Model H160-B helicopters. AD 2024-26-01 required measuring the axial play of the rotating scissors spherical bearings, and depending on the results, accomplishing corrective action and reporting inspection results. Since the FAA issued AD 2024-26-01, Airbus Helicopters issued revised material to extend the applicability to all rotating scissors spherical bearing serial numbers, change the initial compliance time, establish repetitive inspections, and extend the reporting requirements. This AD was prompted by a determination that the initial compliance time and reporting requirement needed to be modified and repetitive inspections for certain axial play measurements added. This AD retains the actions required in AD 2024-26-01, revises the initial compliance time, extends the definition of an affected part to all serial numbered rotating scissors spherical bearings, extends the reporting requirements, and requires repetitive inspections. This AD also prohibits installing an affected rotating scissors spherical bearing unless certain requirements are met. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-07-08 · published Apr 10, 2025, effective Apr 25, 2025
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters. This AD results from a report of the loss of the tail rotor pitch control due to a fracture of the tail rotor slide of the tail rotor head (TRH) assembly. This AD requires inspecting the slide of the control plate of the TRH assembly for any score, scratch, crack, or corrosion, removing corrosion and replacing the TRH assembly, slide of the control plate, or pitch control assembly if discrepancies are found, and reporting the results of the inspection. This AD prohibits installing an affected TRH assembly unless the actions of this AD are accomplished. All of these actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-08-02 · published Apr 17, 2025, effective May 2, 2025
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model H160-B helicopters. This AD was prompted by reports of difficulty moving the locking fingers when applying the jettisoning function of the windows. This AD requires repetitively lubricating the locking fingers of each jettisonable window, performing an operational test, and depending on the results, performing corrective actions. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-08-03 · published Apr 17, 2025, effective May 2, 2025
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model AS332L2 helicopters. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICAs) and the existing approved maintenance or inspection program, as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-08-04 · published Apr 17, 2025, effective May 2, 2025
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model AS332L helicopters. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICAs) and the existing approved maintenance or inspection program, as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-07-07 · published Apr 18, 2025, effective May 23, 2025
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model A109C, A109E, A109S, and AW109SP helicopters. This AD was prompted by a report of a quality escape on a batch of main rotor blades (MRBs). This AD requires repetitively tap inspecting certain MRBs and replacing those MRBs. This AD also prohibits installing those MRBs, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-09-01 · published Apr 28, 2025, effective May 13, 2025
Bell Textron Canada Limited Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Canada Limited (BTCL) Model 505 helicopters. This AD was prompted by reports of possible chafing in certain locations between the basic and supplemental helicopter wiring and the structure. This AD requires repetitively inspecting the wire harnesses at certain locations for damage, and if any wire damage is found, repairing the damaged wire/bundles, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-09-03 · published Apr 28, 2025, effective May 13, 2025
Bell Textron Canada Limited Helicopters
The FAA is superseding Airworthiness Directive (AD) 2021-24- 09, which applied to certain Bell Textron Canada Limited Model 430 helicopters. AD 2021-24-09 required a visual inspection of the main rotor (M/R) pitch link clevis (clevis), rod end, and a certain part- numbered universal bearing, performing a purge grease, and performing a magnetic particle inspection of each M/R clevis, and depending on the inspection results, removing or replacing certain parts and performing additional actions. AD 2021-24-09 also required recurring inspections of each M/R clevis and each universal bearing. Since the FAA issued AD 2021-24-09, the manufacturer has reduced the life limits of the affected parts and introduced new M/R pitch link assemblies by re- identifying the M/R pitch link assemblies that were required to be inspected by AD 2021-24-09. This AD requires similar actions as AD 2021-24-09 but reduces the life limits and requires replacing the M/R pitch link assemblies with re-identified part numbered assemblies. These actions are specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-07-02 · published Apr 4, 2025, effective Apr 21, 2025
BRP-Rotax GmbH & Co KG (Formerly BRP-POWERTRAIN GMBH & CO KG and Bombardier-Rotax GmbH) Engines
The FAA is adopting a new airworthiness directive (AD) for certain BRP-Rotax GmbH & Co KG (Rotax) Model 912 iSc2 Sport, 912 iSc3 Sport, 915 iSc2 C24, and 915 iSc3 C24 engines. This AD was prompted by a report of deviations during the manufacturing process that caused incorrect application of a certain thread-locker to certain sprag clutch housing and oil spray nozzles. This AD requires repetitive operational checks of the battery backup function with removal of the engine from service if insufficient battery power is found, one-time inspections of the oil spray nozzle and generator stator assembly, and, depending on the results of the inspections, replacement with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2025-07-10 · published Apr 16, 2025, effective May 21, 2025
General Electric Company Engines
The FAA is superseding Airworthiness Directive (AD) 2020-20-17 and AD 2021-15-05 for all General Electric Company (GE) Model GE90- 110B1 and GE90-115B engines. AD 2020-20-17 prohibits dispatch of an airplane if certain status messages are displayed on the engine indicating and crew alerting system (EICAS) and if certain conditions are present; and as terminating action, requires revision of the existing FAA-approved minimum equipment list (MEL) by incorporating the dispatch restrictions into the MEL. AD 2021-15-05 requires initial and repetitive replacement of the full authority digital engine control (FADEC) integrated circuit (MN4) microprocessor. Since the FAA issued AD 2020-20-17 and AD 2021-15-05, the manufacturer has developed a software revision for the electronic engine control (EEC) FADEC that further mitigates the unsafe condition. This AD retains all the actions of AD 2020-20-17 and AD 2021-15-05, and also requires upgrading the EEC FADEC software to an EEC FADEC software version eligible for installation as a terminating action. The FAA is issuing this AD to address the unsafe condition on these products.
