38 Airworthiness Directives: 19 airplane, 8 rotorcraft, 4 engine, 1 appliance, 4 glider, 1 balloon, 1 various.
AD 2021-24-14 · published Jan 11, 2022, effective Feb 15, 2022
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by reports of damage to the thrust reverser (TR) translating sleeve secondary sliders due to contact between the slider and the slider track liner. This damage could reduce the fatigue life of the slider below its full design life for the TRs installed on certain engines. This AD requires determining the serial number of the TR and performing applicable on-condition actions; or replacing the TR with a serviceable TR. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-25-06 · published Jan 11, 2022, effective Feb 15, 2022
Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-25- 16, which applied to certain Airbus Defense and Space S.A. Model CN- 235, CN-235-200, and CN-235-300 airplanes. AD 2018-25-16 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2018-25-16, the FAA has determined that additional new or more restrictive airworthiness limitations, including inspections for discrepancies (cracking) of certain structural elements, are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations, and repetitive inspections for discrepancies (cracking) of certain structural elements and corrective actions; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-25-07 · published Jan 11, 2022, effective Feb 15, 2022
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a discovery that a lockwire may not have been installed on the side stay actuator pin nut of the main landing gear (MLG). This AD requires inspecting the left-hand and right-hand MLG side stay actuator assembly pin nut for the presence of a lockwire, and installing a lockwire if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-25-13 · published Jan 11, 2022, effective Feb 15, 2022
Bombardier, Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-05 · published Jan 11, 2022, effective Feb 15, 2022
Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-07- 17, which applied to all Saab AB, Support and Services Model SAAB 2000 airplanes. AD 2020-07-17 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2020-07- 17, it has determined that new or more restrictive airworthiness limitations are necessary. This AD retains the requirements of AD 2020- 07-17 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-15 · published Jan 11, 2022, effective Feb 15, 2022
Vulcanair S.p.A. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain km, Vulcanair S.p.A. Model P.68C, P.68C-TC, P.68 "OBSERVER," P.68 OBSERVER 2, P.68R, and P.68TC OBSERVER airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as a damaged stabilator trim control cable. This AD requires inspecting the stabilator trim control cables and replacing if necessary. This AD also requires reporting the results of each inspection to Vulcanair S.p.A. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-17 · published Jan 11, 2022, effective Feb 15, 2022
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-03- 26, which applied to certain The Boeing Company Model 737-600, -700, - 700C, -800, -900, and -900ER series airplanes. AD 2019-03-26 required modifying the passenger service units (PSUs) and life vest panels by replacing the existing inboard lanyard and installing two new lanyards on the outboard edge of the PSUs and life vest panels; measuring the distance between the hooks of the torsion spring of the lanyard assembly; replacing discrepant lanyard assemblies; and re-identifying serviceable lanyard assemblies. This AD was prompted by a determination that certain airplanes are listed in the wrong configuration and certain PSUs have not been correctly re-identified. This AD retains the requirements of AD 2019-03-26, and, for certain airplanes, requires an inspection to determine if the re-identified PSU part number is correct, and further re-identification if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-25-05 · published Jan 18, 2022, effective Feb 22, 2022
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-23- 02, which applied to certain The Boeing Company Model 737-200, -200C, - 300, -400, and -500 series airplanes. AD 2017-23-02 required repetitive inspections, replacement, and applicable on-condition actions for certain fuselage crown skin panels. This AD was prompted by an evaluation by the design approval holder indicating that the fuselage crown skin panels are subject to widespread fatigue damage. This AD retains the actions in AD 2017-23-02, revises certain airplane configurations and inspection locations, and adds airplanes to the applicability. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-03 · published Jan 18, 2022, effective Feb 22, 2022
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-300, -400, and -500 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the frame splice between certain stringers is subject to widespread fatigue damage (WFD). This AD requires an inspection of certain fuselage frame splices for existing repairs, repetitive inspections of certain fuselage frame splices for cracking, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-10 · published Jan 18, 2022, effective Feb 22, 2022
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, -400D, and -400F series airplanes. This AD was prompted by reports of burned Boeing Material Specification (BMS) 8-39 urethane foam, and a report from the airplane manufacturer that airplanes were assembled with seals throughout various areas of the airplane (including flight deck and cargo compartments) made of BMS 8-39 urethane foam, a material with fire- retardant properties that deteriorate with age. This AD requires replacing the system tube/wire seals made of BMS 8-39 urethane foam in certain areas of the airplane. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-02-16 · published Jan 19, 2022, effective Jan 19, 2022
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band), and a recent determination that, during landings, as a result of this interference, certain airplane systems may not properly transition from AIR to GROUND mode when landing on certain runways, resulting in degraded deceleration performance and longer landing distance than normal due to the effect on thrust reverser deployment, speedbrake deployment, and increased idle thrust. This AD requires revising the limitations and operating procedures sections of the existing airplane flight manual (AFM) to incorporate limitations prohibiting certain landings and the use of certain minimum equipment list (MEL) items, and to incorporate operating procedures for calculating landing distances, when in the presence of 5G C-Band interference as identified by Notices to Air Missions (NOTAMs). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-02-15 · published Jan 20, 2022, effective Feb 24, 2022
Gulfstream Aerospace Corporation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-12-06 for all Gulfstream Aerospace Corporation (Gulfstream) Model G-IV airplanes. AD 2020-12-06 required replacing the nose wheel steering servo valve manifold, incorporating revised operating procedures into the airplane flight manual (AFM), doing a records inspection for any incidents of un-commanded nose wheel steering turns, and reporting the results to the FAA. Since the FAA issued AD 2020-12-16, the FAA determined that a typographical error was made in citing one of the AFM documents. This AD retains the actions of AD 2020-12-06 and corrects the citation to the AFM. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-21 · published Jan 21, 2022, effective Feb 25, 2022
Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as insufficient performance of the fuel drain system that could lead to fire and damage of the airplane. This AD requires modifying the fuel drain pipe routing and installing a drain mast. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-23 · published Jan 21, 2022, effective Feb 25, 2022
Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-22- 06, which applied to certain Bombardier, Inc., Model CL-600-2B16 (601- 3A, 601-3R, and 604 Variants) airplanes. AD 2017-22-06 required repetitive inspections for fuel leakage at the engine and auxiliary power unit (APU) fuel pumps, and related investigative and corrective actions if necessary. This AD retains the requirements of AD 2017-22- 06, and requires an inspection of the APU, repair if necessary, and modification of the engine electrical fuel pump (EFP) installation. This AD also adds airplanes to the applicability. This AD was prompted by reports of fuel leaks from the electrical connectors and conduits of the engine and APU EFP cartridge/canister, and the development of additional actions to address the root cause of the fuel leaks. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-27 · published Jan 27, 2022, effective Mar 3, 2022
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a report indicating that during production, the manual opening and closing of the over-wing emergency exit door (OWEED) prior to the installation of the OWEED interior panel could have resulted in damaged insulation blankets below the left and right OWEEDs. This AD requires a one-time inspection for damage of the insulation blankets below the left and right OWEEDs, and replacement if necessary, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-28 · published Jan 27, 2022, effective Mar 3, 2022
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 757 airplanes. This AD was prompted by significant changes, including new or more restrictive requirements, made to the airworthiness limitations (AWLs) related to fuel tank ignition prevention and the nitrogen generation system. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-01-02 · published Jan 27, 2022, effective Mar 3, 2022
De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-400, -401, and -402 airplanes. This AD was prompted by a report that the epoxy primer on the internal bore of the nacelle and landing gear attachment pins was not applied, and corrosion on the internal bore of the wing rear spar attachment pins was found. This AD requires doing a detailed visual inspection of the nacelle to wing rear spar attachment pins, and the nacelle and landing gear attachment pins, for any corrosion, and doing all applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-03-05 · published Jan 27, 2022, effective Jan 27, 2022
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-8F and 747-8 series airplanes and Model 777 airplanes. This AD was prompted by a determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band), and a recent determination that this interference may affect multiple airplane systems using radio altimeter data, including the pitch control laws, including those that provide tail strike protection, regardless of the approach type or weather. This AD requires revising the limitations section of the existing airplane flight manual (AFM) to incorporate limitations prohibiting dispatching or releasing to airports, and approaches or landings on runways, when in the presence of 5G C-Band interference as identified by Notices to Air Missions (NOTAMs). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-03-20 · published Jan 31, 2022, effective Jan 31, 2022
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. This AD was prompted by a determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band), and a recent determination that, during takeoffs and landings, as a result of this interference, certain airplane systems may not properly function, resulting in longer than normal landing or rejected takeoff distances due to the effect on thrust reverser deployment, spoilers, speedbrake deployment, and increased idle thrust, regardless of the approach type or weather. This AD requires revising the limitations and operating procedures sections of the existing airplane flight manual (AFM) to incorporate limitations prohibiting the use of certain minimum equipment list (MEL) items, and to incorporate operating procedures for calculating takeoff and landing distances, when in the presence of 5G C-Band interference as identified by Notices to Air Missions (NOTAMs). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-14 · published Jan 5, 2022, effective Feb 9, 2022
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2018-11- 01, which applied to certain Airbus Helicopters Model AS332L2 and EC225LP helicopters. AD 2018-11-01 required installing a cut-out for the left-hand (LH) and right-hand (RH) rail support junction profiles and repetitively inspecting splices, frame 5295, and related equipment for a crack. Since the FAA issued AD 2018-11-01, the manufacturer has developed a modification for in-service helicopters for replacing aluminum splices with steel splices on frame 5295. This AD retains the requirements of AD 2018-11-01 and requires a modification for replacing aluminum splices with steel splices on frame 5295 if cracking is found. This AD also provides terminating action for the repetitive inspections. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-18 · published Jan 5, 2022, effective Feb 9, 2022
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2020-21-01 for certain Airbus Helicopters Model AS-365N2, AS 365N3, EC 155B, EC155B1, and SA-365N1 helicopters. AD 2020-21-01 required modifying the main gearbox (MGB) tail rotor (T/R) drive flange installation. This AD was prompted by several reported occurrences of loss of tightening torque of the Shur-Lok nut, which serves as a retainer of the MGB T/R drive flange. This AD continues to require modifying the MGB T/R drive flange installation, and includes additional helicopters in the applicability for the required actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-02-01 · published Jan 14, 2022, effective Feb 18, 2022
Sikorsky Aircraft Corporation Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Sikorsky Aircraft Corporation Model S-92A helicopters. This AD was prompted by a cracked main rotor stationary swashplate assembly (swashplate assembly). This AD requires visually inspecting the swashplate assembly at specified intervals and depending on the results, removing the swashplate assembly from service. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-24 · published Jan 18, 2022, effective Feb 22, 2022
Leonardo S.p.a. (Type Certificate Previously Held by Agusta S.p.A.) Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. (type certificate previously held by Agusta S.p.A.) Model A109A and A109A II helicopters. This AD was prompted by a report of internal corrosion on a main rotor (M/R) blade. This AD requires repetitively inspecting affected M/R blades and accomplishing film analysis and repair in accordance with certain approved methods. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-29 · published Jan 18, 2022, effective Feb 22, 2022
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model AW169 helicopters. This AD was prompted by a report of a broken adjustable device that is part of the pilot and co- pilot yaw pedal assemblies. This AD requires modification of certain pilot and co-pilot yaw pedal assemblies with an improved design and re- identification of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-26 · published Jan 19, 2022, effective Feb 23, 2022
Safran Helicopter Engines, S.A. (Type Certificate Previously Held by Turbomeca S.A.) Turboshaft Engines
The FAA is superseding Airworthiness Directive (AD) 2005-12-08 for certain Safran Helicopter Engines, S.A. (Safran Helicopter Engines) Arrius 2B1, 2B1A, 2B1A-1, and 2B2 model turboshaft engines. AD 2005-12- 08 required replacing the software in the engine electronic control unit (EECU). This AD was prompted by a report of simultaneous loss of automatic control on both engines installed on an Airbus Helicopters Deutschland (formerly Eurocopter Deutschland) EC135 helicopter during flight. This AD requires replacement of the EECU or upgrade of the EECU software for engines with a certain EECU part number (P/N) installed. This AD also prohibits installation of an affected EECU onto any engine. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-02-17 · published Jan 26, 2022, effective Feb 10, 2022
Airbus Helicopters Deutschland GmbH (AHD) Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH (AHD) Model MBB-BK 117 C-2, MBB-BK 117 D-2, and MBB-BK 117 D-3 helicopters. This AD was prompted by reports of engine flame out following prolonged operations in falling snow on helicopters with an inlet barrier filter (IBF) system installed. This AD requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-01-01 · published Jan 31, 2022, effective Mar 7, 2022
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350D, EC130B4, and EC130T2 helicopters; AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters; and Model SA-365C1, SA-365C2, SA-365N, SA-365N1, AS-365N2, and AS 365 N3 helicopters. This AD was prompted a report of increased vibration during flight. This AD requires the application of alignment markings on, and repetitive inspections of, the main rotor (MR) pitch rod upper links and, depending on findings, the accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-06 · published Jan 11, 2022, effective Feb 15, 2022
General Electric Company Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) GE90 model turbofan engines. This AD was prompted by two separate in-flight shutdowns (IFSDs) resulting from failure of the transfer gearbox (TGB) radial bevel gear (TGB radial gearshaft). This AD requires visual inspection of the TGB radial gearshaft and, depending on the results of the inspection, replacement of the TGB radial gearshaft. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-02-05 · published Jan 12, 2022, effective Jan 27, 2022
Pratt & Whitney Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney (P&W) PW1500G and PW1900G model turbofan engines. This AD was prompted by an analysis of an event involving an International Aero Engines AG (IAE) V2533-A5 model turbofan engine, which experienced an uncontained failure of a high-pressure turbine (HPT) 1st-stage disk that resulted in high-energy debris penetrating the engine cowling. This AD requires removing certain HPT 1st-stage and HPT 2nd-stage disks from service and replacing with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-02-18 · published Jan 21, 2022, effective Feb 25, 2022
General Electric Company Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for all General Electric Company (GE) CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6- 80C2A5, CF6-80C2A5F, and CF6-80C2A8 model turbofan engines with an installed left-hand rear mount link assembly, part number (P/N) 1846M23G01. This AD was prompted by the manufacturer reducing the life limit for the affected left-hand rear mount link assembly. This AD requires revising the airworthiness limitations section (ALS) of the existing engine maintenance manual and the operator's existing approved continuous airworthiness maintenance program (CAMP). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-03-03 · published Jan 28, 2022, effective Feb 14, 2022
Austro Engine GmbH Engines
The FAA is superseding Airworthiness Directive (AD) 2021-22-20 which applied to certain Austro Engine GmbH E4 and E4P model diesel piston engines. AD 2021-22-20 required, for engines with an affected cylinder head, inspection of the high pressure pump (HPP) driving gear and, depending on the results of the inspection, replacement of the HPP driving gear with a part eligible for installation. AD 2021-22-20 also required, for engines with an affected HPP driving gear, replacement of the HPP driving gear before further flight or within a certain number of flight hours, depending on the engine configuration and number of affected engines installed. This AD requires, for engines equipped with a certain cylinder head and HPP driving gear combination, removal, inspection, and replacement of the HPP driving gear before further flight and, depending on the inspection findings, replacement of the HPP shaft, cylinder head, camshaft gear, or inlet/outlet camshaft bushing. This AD also requires, for engines with an affected HPP driving gear, replacement of the HPP driving gear before further flight or within a certain number of flight hours, depending on the engine configuration and number of affected engines installed. This AD was prompted by reports of failure of the HPP driving gear and a subsequent determination that a batch of HPP driving gears may have been damaged during assembly. This AD was also prompted by an investigation which found that certain cylinder heads installed in combination with certain HPP driving gear on the same engine may cause damage to the HPP driving gear. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-01-03 · published Jan 31, 2022, effective Mar 7, 2022
Umlaut Engineering GmbH (Previously P3 Engineering GmbH) HAFEX (Halon-Free) Hand-Held Fire Extinguishers
The FAA is adopting a new airworthiness directive (AD) for certain Umlaut Engineering GmbH (previously P3 Engineering GmbH) HAFEX (Halon-free) hand-held P3HAFEX fire extinguishers (fire extinguishers). This AD was prompted by reports of a quality control issue on certain fire extinguishers, where the spindle geometries of the fire extinguishers were found to be out of tolerance. This AD requires removing affected fire extinguishers from service. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-01-09 · published Jan 12, 2022, effective Jan 27, 2022
Stemme AG Gliders
The FAA is adopting a new airworthiness directive (AD) for certain Stemme AG Model Stemme S 10-VT and Stemme S 12 gliders. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as unintended slipping of the freewheel clutch with overheating (burnishing) of the friction pads inside of the clutch. This AD requires removing the affected freewheel clutch from service. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-12 · published Jan 20, 2022, effective Feb 24, 2022
Stemme AG Gliders
The FAA is adopting a new airworthiness directive (AD) for certain Stemme AG Model Stemme S 12 gliders. This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as the incorrect installation of an axle connecting the main landing gear (MLG) to the center steel frame. This AD requires inspecting the MLG installation and repairing if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-25 · published Jan 20, 2022, effective Feb 24, 2022
Schempp-Hirth Flugzeugbau GmbH Gliders
The FAA is adopting a new airworthiness directive (AD) for certain Schempp-Hirth Flugzeugbau GmbH Model Duo Discus and Duo Discus T gliders. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as jerky extension of the air brakes at very high air speeds, including cases where the air brake blades interlock. This AD requires replacing certain air brake end stop bushings, inspecting certain other air brake end stops, and repairing if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-03-07 · published Jan 26, 2022, effective Mar 2, 2022
Stemme AG Gliders
The FAA is adopting a new airworthiness directive (AD) for certain Stemme AG TSA-M Model S6 and S6-RT gliders. This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a new version of the propeller gearbox tooth belt with a reduced life limit. This AD requires establishing a life limit of 5 years for certain propeller gearbox tooth belts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2022-01-06 · published Jan 3, 2022, effective Jan 18, 2022
Cameron Balloons Ltd. Fuel Cylinders
The FAA is adopting a new airworthiness directive (AD) for certain Cameron Balloons Ltd. (Cameron) fuel cylinders installed on hot air balloons. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as quick shut-off (QSO) flanged adaptors manufactured with non-conforming (undersized) threads. This AD immediately requires either replacing the QSO flange adapter or inspecting the fuel cylinder for leakage and taking corrective action, and replacing the QSO flange adapter within 4 months. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-26-16 · published Jan 21, 2022, effective Feb 25, 2022
Various Restricted Category Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain type certificated Model UH-1H restricted category helicopters. This AD was prompted by multiple reports of failure of the main driveshaft. This AD requires establishing a limit to replace certain main driveshafts, and a one-time and repetitive inspections of the main driveshafts. The FAA is issuing this AD to address the unsafe condition on these products.
