33 Airworthiness Directives: 16 airplane, 10 rotorcraft, 6 engine, 1 balloon.
AD 2021-13-12 · published Aug 5, 2021, effective Sep 9, 2021
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL- 600-2B16 (601-3A, 601-3R and 604 Variants) airplanes. This AD was prompted by reports of corrosion on the passenger door internal structure of in-service airplanes. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-02 · published Aug 5, 2021, effective Sep 9, 2021
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by reports of deficiencies in the primary flight control computer (PFCC) software and the remote electronics unit (REU) software. This AD requires installation of a software update to correct deficiencies in the PFCC and REU software, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-07 · published Aug 5, 2021, effective Sep 9, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200, -200 Freighter, -300, -800, and -900 series airplanes; and Model A340-200 and -300 series airplanes. This AD was prompted by reports of incorrect installation of the lower attachment parts of the trimmable horizontal stabilizer actuator (THSA). This AD requires doing a detailed inspection of the THSA lower attachment parts for discrepancies and corrective action if necessary, and prohibits using earlier versions of certain airplane maintenance manual (AMM) tasks, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-08 · published Aug 5, 2021, effective Sep 9, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a report that during an inspection of the flight deck escape hatches it was found that they were difficult to open from the inside, and several hatches were found impossible to open from the outside. Subsequent investigation revealed corrosion on the flight deck escape hatch mechanism due to condensation penetrating inside the mechanism. This AD requires replacing all affected flight deck escape hatches with serviceable hatches, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-11 · published Aug 5, 2021, effective Sep 9, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200, -300, -800, and -900 series airplanes; and Model A340-200, -300, -500, and -600 series airplanes. This AD was prompted by reports that certain oxygen supply solenoid valves are a potential source of increased flow resistance within the flightcrew oxygen system. This AD requires a special detailed inspection (flow test) of certain solenoid valves, and replacement if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-13 · published Aug 5, 2021, effective Sep 9, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-841 and -941 airplanes. This AD was prompted by reports of missing or disbonded pressure seals on two thrust reverser (TR) translating cowls. This AD requires a one-time inspection of each thrust reverser for damage, seal bonding rework, and replacement of translating cowl pressure seals if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-16-15 · published Aug 9, 2021, effective Aug 9, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-8, 737-9, and 737-8200 (737 MAX) airplanes; and certain Model 737-800 and 737-900ER series airplanes. This AD was prompted by the determination that the aft cargo compartment fire suppression capability is reduced if the airplane is dispatched or released with failed electronic flow control of air conditioning packs, as is currently allowed by these airplane models' master minimum equipment lists (MMELs). This AD prohibits the carriage of cargo in the aft cargo compartment when the airplane is dispatched or released with failed electronic flow control of air conditioning packs. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-07 · published Aug 13, 2021, effective Aug 30, 2021
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Model BD-500-1A10 and BD-500-1A11 airplanes. This AD was prompted by the potential for the flexible hose assembly of the fuel motive flow (MF), installed between the pylon and wing, to be installed twisted in the shroud, which can restrict the flow of fuel for the MF and cause fuel imbalance and damage to the shroud assembly. This AD requires inspecting for damage of the left and right MF fuel line assemblies (including the flexible-hose and shroud assemblies), and replacing damaged parts, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-08 · published Aug 17, 2021, effective Aug 17, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-800 and -900ER series airplanes. This AD was prompted by reports that several of the fittings that provide attachment between the radome and fuselage were cracked to the point of failure on airplanes modified in accordance with a certain supplemental type certificate (STC). This AD requires demodification of the STC installation on the airplane by removing the external equipment installed during the STC modification (including the radome, antenna, and associated structure), installing doubler and fasteners, and system deactivation by pulling and collaring associated circuit breakers if installed. This AD also requires inspecting the external and feed- through doublers, intercostals, skin, and frames in the area around the removed external equipment for cracking, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-16-01 · published Aug 24, 2021, effective Sep 28, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, - 113, -114, -115, -131, -132, -133, -151N, and -153N airplanes; Model A320 series airplanes; and Model A321 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-16-07 · published Aug 24, 2021, effective Sep 28, 2021
Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Defense and Space S.A. Model C-212-CB, C-212-CC, C-212- CD, C-212-CE, C-212-CF, C-212-DE, and C-212-DF airplanes. This AD was prompted by a report of cracks on the left-hand (LH) and right-hand (RH) side fuselage skin and on a certain frame underneath the skin, near the leading edge of the wing. This AD requires repetitive inspections of the LH and RH side center wing fairings at a certain frame, around the wing leading edge for discrepancies (cracks), and repair if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-16-03 · published Aug 26, 2021, effective Sep 30, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a report of in-production findings of missing or incorrect application of the lightning strike edge glow sealant protection at specific locations in the wing tanks. This AD requires an inspection for missing or incorrect application of the lightning strike edge glow sealant protection at certain locations in the wing tanks, and corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-18-08 · published Aug 30, 2021, effective Sep 14, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A319-171N; Model A320-271N, -272N, and -273N airplanes; and Model A321-271N, -272N, -271NX, and -272NX airplanes. This AD was prompted by a report indicating that during inspection of the engines, two original rods installed to maintain an interface plate between the pylon and nacelle were found damaged at both rod-eye ends. This AD requires repetitive inspections of the pylon/engine interface rods for damage, and applicable corrective actions, and limits the installation of affected parts under certain conditions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-02 · published Aug 31, 2021, effective Oct 5, 2021
ATR-GIE Avions de Transport Régional Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-23- 13, which applied to all ATR--GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes. AD 2020-23-13 required a one-time inspection for discrepancies of the wire bundles between the left- and right-hand angle of attack (AOA) probes and the crew alerting computer, and, depending on findings, applicable corrective actions. This AD continues to require the actions in AD 2020-23-13, and also requires for certain airplanes, modifying the captain stick shaker wiring, and for all airplanes, revising the existing aircraft flight manual (AFM) and applicable corresponding operational procedures to incorporate procedures for the stick pusher/shaker, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by false activation of the stall warning system due to wiring damage on the wire bundle between an AOA probe and the crew alerting computer, and the development of a wiring modification and AFM update to address the unsafe condition. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-04 · published Aug 31, 2021, effective Oct 5, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A321-211, -231, and -232 airplanes. This AD was prompted by a report of false drill starts found around the latch hook mounting holes of certain door frames of the fuselage due to erroneous manufacturing processes. This AD requires a one-time inspection of the area around the latch hook mounting holes of the forward and aft door frames to detect damage from false drill starts, and repair if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-06 · published Aug 31, 2021, effective Oct 5, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-100, -100B, -100B SUD, -200B, -200C, - 200F, -300, -400, -400D, -400F, 747SR, and 747SP airplanes. This AD was prompted by reports of cracks found in the front spar shear tie and at the intercostal lug fitting at certain locations. This AD requires repetitive detailed and surface high frequency eddy current (HFEC) inspections of the front spar shear tie and intercostal lug fitting at certain locations for any cracking, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-51 · published Aug 9, 2021, effective Aug 24, 2021
Bell Textron Inc. (Type Certificate Previously Held by Bell Helicopter Textron Inc.) Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Inc. (type certificate previously held by Bell Helicopter Textron Inc.) Model 204B, 205A, 205A-1, 205B, and 212 helicopters. This AD was prompted by a fatal accident in which an outboard main rotor hub strap pin (pin) sheared off during flight, resulting in the main rotor blade and the main rotor head detaching from the helicopter. This AD requires removing the pins from service before further flight and prohibits installing them on any helicopter. The FAA previously sent an emergency AD to all known U.S. owners and operators of these helicopters and is now issuing this AD to address the unsafe condition on these products.
AD 2021-16-20 · published Aug 11, 2021, effective Aug 26, 2021
PZL Swidnik S.A. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain PZL Swidnik S.A. Model PZL W-3A helicopters. This AD requires visually inspecting the bonding on a certain part-numbered fairing installed on a certain part-numbered vibration absorber, improving the bonding if necessary, using improved installation procedures to secure the fairing to the vibration absorber, and removing certain parts from service. This AD also prohibits installing the affected part unless it is inspected and installed per the AD requirements. This AD was prompted by a report of a broken bolt securing the fairing to the vibration absorber that resulted from an incorrect torque value for the nut used to secure the fairing to the vibration absorber. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-16-13 · published Aug 18, 2021, effective Sep 22, 2021
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for Leonardo S.p.a. (Leonardo) Model A109S and AW109SP helicopters with a certain part-numbered vertical fin vibration absorber installation installed. This AD requires repetitive inspections of the vertical fin vibration absorber installation and the surrounding structure and depending on the inspection results, removing certain parts from service. This AD also prohibits installing certain part-numbered vertical fin vibration absorber installations on any helicopter. This AD was prompted by a report of cracks and damage detected on the vertical fin absorber installation and surrounding structure during scheduled inspections. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-16-02 · published Aug 20, 2021, effective Sep 24, 2021
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model SA330J, AS332C, AS332L, AS332L1, AS332L2, and EC225LP helicopters. This AD was prompted by a report of a left-hand (LH) side stairway door that inadvertently opened in flight and tore off from its attachment fittings. This AD requires inspecting the locking safety mechanism of the LH side stairway door handle and depending on the results, corrective action. This AD also requires modifying that locking safety mechanism as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-10 · published Aug 20, 2021, effective Sep 7, 2021
Leonardo S.p.a Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. Model A109A, A109A II, A109C, A109E, A109K2, A109S, and AW109SP helicopters, having a certain rotor brake kit installed. This AD was prompted by a report of un-commanded activation of the rotor brake system before take-off due to a jammed rotor brake control cable and subsequent partially open brake control valve. This AD requires repetitive inspections of the rotor brake control cable and replacement of the rotor brake control cable, if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-13 · published Aug 20, 2021, effective Sep 7, 2021
PZL Swidnik S.A. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain PZL Swidnik S.A. Model PZL W-3A helicopters. This AD was prompted by a report of a damaged wheel braking system pneumatic line fitting installed on the left-hand (LH) main landing gear (MLG) leg. This AD requires modifying the LH MLG leg. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-16 · published Aug 20, 2021, effective Sep 24, 2021
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. Model AW189 helicopters. This AD was prompted by fatigue testing and analyses. This AD requires establishing a life limit for a certain part-numbered tail gearbox fitting. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-18 · published Aug 20, 2021, effective Sep 7, 2021
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model A109C, A109K2, A109E, A109S, and AW109SP helicopters. This AD was prompted by a report of a crack on the tail rotor (TR) mast. This AD requires an inspection of certain TR sleeve assemblies for discrepancies, an inspection of certain TR shaft assemblies for discrepancies, a repetitive measurement of the position of the bushing of the TR sleeve assembly in relation to the pitch change slider assembly, and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-16-06 · published Aug 23, 2021, effective Sep 27, 2021
Leonardo S.p.a. Helicopters
The FAA is superseding Airworthiness Directive (AD) 2020-19-11 for certain Leonardo S.p.a. Model A119 and AW119 MKII helicopters. AD 2020-19-11 required repetitive borescope inspections of the 90-degree tail rotor gearbox (TGB) and depending on the inspection results, removing the TGB from service. This AD was prompted by the determination that additional parts may be susceptible to the unsafe condition. This AD retains the inspection requirements of AD 2020-19-11, and revises the compliance time and applicability. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-18-06 · published Aug 26, 2021, effective Sep 10, 2021
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2021-11- 03, which applied to certain Airbus Helicopters Model EC 155B, EC155B1, SA-365N, SA-365N1, AS-365N2, and AS 365 N3 helicopters. AD 2021-11-03 required inspecting the main gearbox (MGB) fixed cowling front fitting (MGB front fitting), and depending on findings, corrective action. This AD retains the requirements of AD 2021-11-03, and includes service information that was omitted for Airbus Helicopter Model EC 155B and EC155B1 helicopters, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-12 · published Aug 5, 2021, effective Sep 9, 2021
Pratt & Whitney Canada Corp. Turboshaft Engines
The FAA is adopting a new airworthiness directive (AD) for all Pratt & Whitney Canada Corp. (P&WC) PW210A and PW210S model turboshaft engines. This AD was prompted by a report from the manufacturer that the Automated Damage Tracking System (ADTS) may under-count the number of cycles accrued by the impeller and the high-pressure compressor (HPC) rotor. This AD requires use of the manual low-cycle fatigue (LCF) counting method in place of the ADTS counting method to determine the number of cycles accrued by the impeller and HPC rotor. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-01 · published Aug 6, 2021, effective Aug 23, 2021
Austro Engine GmbH Engines
The FAA is adopting a new airworthiness directive (AD) for all Austro Engine GmbH E4 and E4P model diesel piston engines. This AD was prompted by a report of oil pressure loss on an E4 model diesel piston engine. This AD requires removing a certain oil pump from service and replacing it with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-05 · published Aug 9, 2021, effective Sep 13, 2021
General Electric Company Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for all General Electric Company (GE) GE90-110B1 and GE90-115B model turbofan engines. This AD was prompted by an in-service occurrence of loss of engine thrust control resulting in uncommanded high thrust. This AD requires initial and repetitive replacement of the full authority digital engine control (FADEC) integrated circuit (MN4) microprocessor. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-10 · published Aug 17, 2021, effective Sep 21, 2021
GE Aviation Czech s.r.o. (Type Certificate Previously Held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.) Turboprop Engines
The FAA is adopting a new airworthiness directive (AD) for all GE Aviation Czech s.r.o. (GEAC) H75-200, H80-100, and H80-200 model turboprop engines. This AD was prompted by several reports of engine gas generator speed (Ng) rollbacks occurring below idle on GEAC H75- 200, H80-100, and H80-200 model turboprop engines. This AD requires an inspection of a certain part number (P/N) fuel control unit (FCU) and, if deficiencies are detected, replacement of the FCU with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-17-09 · published Aug 18, 2021, effective Sep 22, 2021
Pratt & Whitney Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for all Pratt & Whitney PW1500G and PW1900G series turbofan engines. This AD was prompted by reports of cracks in the high-pressure compressor (HPC) rotor shaft that resulted in in-flight shutdowns (IFSDs) and unscheduled engine removals (UERs). This AD requires removal and replacement of the HPC front hub and HPC rotor shaft. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-16-08 · published Aug 24, 2021, effective Sep 28, 2021
CFM International, S.A. Turbofan Engines
The FAA is superseding Airworthiness Directive (AD) 2019-12-05 for certain CFM International S.A. (CFM) CFM56-5B, CFM56-5C, and CFM56- 7B model turbofan engines with a certain rotating air high-pressure turbine (HPT) front seal. AD 2019-12-05 required replacement of the affected rotating air HPT front seal with a part eligible for installation. This AD was prompted by cracks found in the rotating air HPT front seal. This AD requires replacement of affected rotating air HPT front seals installed on CFM CFM56-5B, CFM56-5C, and CFM56-7B model turbofan engines that have fewer cycles since being reconfigured than the engines affected by AD 2019-12-05. This AD also requires CFM56-5B or CFM56-7B model turbofan engines with a reconfigured rotating air HPT front seal that was previously operated in a CFM56-5C model turbofan engine to follow the removal requirements for the CFM56-5C model turbofan engine. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-16-14 · published Aug 18, 2021, effective Sep 7, 2021
BALÓNY KUBÍČEK spol. s r.o. Balloons
The FAA is adopting a new airworthiness directive (AD) for certain BAL[Oacute]NY KUB[Iacute][Ccaron]EK spol. s r.o. Models BB78Z, BB85Z, BB92Z, and BB130P balloons. This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as failure of the envelope vertical load tape. The FAA is issuing this AD to address the unsafe condition on these products.
