48 Airworthiness Directives: 19 airplane, 18 rotorcraft, 9 engine, 2 various.
AD 2021-14-08 · published Jul 1, 2021, effective Jul 1, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A319-151N, A319-153N, A319-171N, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N and A321-272NX airplanes. This AD was prompted by reports of an increasing number of operational disruptions due to airspeed discrepancies. This AD requires revising the existing airplane flight manual (AFM) to include a procedure to reinforce the airspeed check during the take-off phase and provide instructions to abort take-off in certain cases, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-12-14 · published Jul 9, 2021, effective Jul 26, 2021
Yaborã Indústria Aeronáutica S.A. (Type Certificate Previously Held by Embraer S.A.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-08- 11, which applied to all Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica Model ERJ 190- 300 and ERJ 190-400 airplanes. AD 2020-08-11 required revising the existing airplane flight manual (AFM) procedures associated with messages of smoke in the electronic bays presented on the respective engine indication and crew alerting system (EICAS). This AD continues to require revising the existing AFM procedures, and adds requirements for a terminating modification of the electrical wiring of the mid- electronic bay and backup smoke detectors; as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. This AD was prompted by a failure propagation test, which revealed that under certain conditions, the smoke detection system of the electrical bays erroneously indicated the presence of smoke via the respective EICAS messages. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-02 · published Jul 12, 2021, effective Aug 2, 2021
Aircraft Industries a.s. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Aircraft Industries a.s. Models L-420, L 410 UVP-E20, and L 410 UVP-E20 CARGO airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as cracking of the retaining bolt on the nose landing gear (NLG) control. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-12 · published Jul 12, 2021, effective Jul 27, 2021
True Flight Holdings LLC Airplanes
The FAA is adopting a new airworthiness directive (AD) for all True Flight Holdings LLC Models AA-1, AA-1A, AA-1B, AA-1C, and AA-5 airplanes. This AD was prompted by the report of an accident of an airplane exhibiting bondline corrosion and delamination of the horizontal stabilizers. This AD requires inspecting the horizontal stabilizers, including the bondlines, for cracks, buckles, corrosion, delamination, rust, and previous repair and repairing or replacing parts and applying corrosion inhibitor as necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-04 · published Jul 14, 2021, effective Jul 14, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767-300 series airplanes as modified by a certain supplemental type certificate (STC). This AD was prompted by a report that the electrical diagram for the C9066 circuit breaker connection (wiring) for the "Main Deck Oxygen Alert Control" is erroneous and might have resulted in incorrect installation. This AD requires inspecting the wiring connection common to the C9066 circuit breaker and, if necessary, making changes to the wiring connection and testing the main deck oxygen alert system. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-02 · published Jul 15, 2021, effective Aug 19, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-300ER series airplanes. This AD was prompted by a report that a production design change to certain insulation blankets inadvertently opened up leakage paths for halon and smoke to escape from the aft cargo compartment in the event of a fire. This AD requires installation of an insulation blanket assembly on top of existing insulation blankets in certain areas of the forward endwall in the aft cargo compartment. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-10 · published Jul 15, 2021, effective Aug 19, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777 airplanes. This AD was prompted by reports indicating that during investigation of a fuel leak, fatigue cracking was found on the forward inboard side of the fuel tank access door cutouts on the left and right lower wing skin. The cause of the cracking is attributed to corrosion damage. This AD requires repetitive inspections for any existing repair of the wing lower skin fuel tank and dry bay access door cutouts on the left and right lower wing skin, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-10 · published Jul 15, 2021, effective Aug 19, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, 747-400D, and 747-400F series airplanes. This AD was prompted by reports of burned Boeing Material Specification (BMS) 8-39 urethane foam found in certain locations on the airplane; investigation revealed that the fire-retardant properties degrade with age. This AD requires inspecting the insulation blankets in certain areas of the forward cargo compartment for exposed BMS 8-39 urethane foam, not encapsulated by a protective fire resistant barrier, and for seal integrity, and replacing the BMS 8-39 urethane foam and seal if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-17 · published Jul 19, 2021, effective Aug 23, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-20 · published Jul 20, 2021, effective Aug 24, 2021
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by reports of corrosion on the waste box, waste access doubler, and waste service door of the rear fuselage due to contamination from waste valve leakage. This AD requires an inspection for corrosion of the waste box, waste access doubler, and waste service door, and corrective actions if necessary, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-01 · published Jul 20, 2021, effective Aug 24, 2021
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report that certain airplanes have navigation units with outdated magnetic variation (MagVar) tables. This AD requires revising the existing airplane flight manual (AFM) and applicable corresponding operational procedures to update the flight management system (FMS) limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-09 · published Jul 20, 2021, effective Aug 24, 2021
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a design review that identified rib 0 of the center wing box (CWB) as an area where a single failure of a clamshell type refuel/defuel line coupling could lead to the accumulation of dangerous levels of electrostatic charges within the fuel tank. This AD requires replacing the clamshell type refuel/defuel line coupling in the CWB at rib 0 with a threaded type fuel coupling, and installing an additional support bracket and clamp in the CWB at rib 0, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-20 · published Jul 20, 2021, effective Jul 20, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737 airplanes. This AD was prompted by reports of latent failures of the cabin altitude pressure switches. This AD requires repetitive functional tests of the pressure switches, and on- condition actions, including replacement, if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-04 · published Jul 22, 2021, effective Aug 26, 2021
Dassault Aviation Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X airplanes and Model FALCON 2000EX airplanes. This AD was prompted by a report that non-certified ANCRA seat tracks were installed on some airplanes and that those seat tracks might not sustain required loads during an emergency landing. This AD requires replacement of certain ANCRA seat tracks with certified (Brownline) seat tracks, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-03 · published Jul 22, 2021, effective Aug 26, 2021
Gulfstream Aerospace Corporation Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation (Gulfstream) Model GVII-G500 airplanes. This AD results from flap yoke fittings with design features that cause decreased fatigue life. This AD requires replacing the flap inboard and outboard yoke fitting assemblies and establishing a 20,000 flight cycle life limit for the fittings. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-11-23 · published Jul 30, 2021, effective Sep 3, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also requires, for certain airplanes, an update of the hydraulic monitoring system to include additional redundancy. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-06 · published Jul 30, 2021, effective Sep 3, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in two European Union Aviation Safety Agency (EASA) ADs, which are incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-11 · published Jul 30, 2021, effective Sep 3, 2021
MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain MHI RJ Aviation ULC Model CL-600-2D15 (Regional Jet Series 705) and CL-600-2D24 (Regional Jet Series 900) airplanes. This AD was prompted by a report that the lower aft outboard supporting structure of galley 2 does not meet certification requirements for all flight and/or emergency landing loads. This AD requires modifying the floor structure between certain fuselage stations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-18 · published Jul 30, 2021, effective Sep 3, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737 airplanes powered by LEAP-1B engines. This AD was prompted by reports of inadvertent release of the spring energy of the spring door opening system (SDOS) actuator with a certain part number, causing injury and the potential for injury to maintenance personnel. This AD requires replacing each affected SDOS actuator with a new SDOS actuator, and verifying that new safety markers are installed in the proper locations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-15 · published Jul 6, 2021, effective Aug 10, 2021
Airbus Helicopters (Type Certificate Previously Held by Eurocopter France) and Eurocopter France Helicopters
The FAA is superseding Airworthiness Directive (AD) 2002-08-16 for certain Eurocopter France SA341G, SA342J, and SA-360C helicopters. AD 2002-08-16 required removing certain main rotor head torsion tie bars (tie bars) from service and revising the limitations section of the existing maintenance manual for your helicopter by adding life limits for certain other tie bars. This AD was prompted by the determination that another part-numbered tie bar is affected by the same unsafe condition. This AD continues to require removing certain tie bars from service and establishing a life limit for certain other tie bars. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-04 · published Jul 7, 2021, effective Aug 11, 2021
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters. This AD was prompted by a report of a yaw control failure that was the result of the disconnection of the tail rotor hub (TRH) pitch control rod from the tail rotor servo-control, which resulted from a seized TRH bearing. The TRH bearing had grease dissolving after contamination by leaked hydraulic fluid from the tail rotor servo- control that came through the TRH assembly boot. This AD requires repetitive inspections for hydraulic leaks, corrective actions if necessary, and an optional modification which constitutes terminating action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-05 · published Jul 7, 2021, effective Aug 11, 2021
Airbus Helicopters Deutschland GmbH Helicopters
The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Deutschland GmbH (Airbus Helicopters) Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters. This AD requires modifying the tail rotor (T/R) control installation, a functional test, and corrective actions as necessary. This AD was prompted by cases of insufficient clearance between a certain T/R control bearing connection and the helicopter structure, which were detected on the production line. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-03 · published Jul 9, 2021, effective Aug 13, 2021
Safran Helicopter Engines, S.A. (Type Certificate Previously Held by Turbomeca, S.A.) Turboshaft Engines
The FAA is adopting a new airworthiness directive (AD) for certain Safran Helicopter Engines, S.A. (Safran Helicopter Engines) Arriel 2B, 2B1, 2C, 2C1, 2C2, 2S1 and 2S2 model turboshaft engines. This AD was prompted by reports of non-conforming fuel filter pre- blockage pressure switches. This AD requires repetitive visual inspections of the fuel filter by-pass indicator pop-up, a one-time operational test of the fuel filter pre-blockage pressure switch and, depending on the findings, replacement of the fuel filter pre-blockage pressure switch with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-14 · published Jul 9, 2021, effective Jul 26, 2021
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. Model AW119 MKII helicopters. This AD was prompted by reports of detected smoke and burning smell during flight, caused by chafing of electrical wiring. This AD requires an inspection of the instrument panel electrical wiring, corrective actions if necessary, a modification of the wiring installation, and, for certain helicopters, an additional modification of the wiring installation, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-09 · published Jul 12, 2021, effective Aug 16, 2021
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Model SA330J helicopters, all serial numbers. This AD was prompted by reports of the failure of the lower bearing cage of the main rotor hub (MRH) flapping hinges and of the presence of metallic particles at the bottom of a drag hinge. This AD requires repetitive inspections of the MRH chip detectors, or for helicopters not equipped with chip detectors, repetitive inspections of the oil for contamination by metallic particles, and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-14 · published Jul 13, 2021, effective Aug 17, 2021
Airbus Helicopters Deutschland GmbH (AHD) Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Deutschland GmbH (AHD) Model BO-105A, BO- 105C, BO-105S, and BO-105LS A-3 helicopters. This AD was prompted by an uncommanded activation of the hoist cable cutter function on an MBB- BK117 C-1 helicopter, which prompted a design review of the BO105 hoist control grip with coiled cable. This AD requires inspections of the hoist control grip with coiled cable and deactivation of the hoist cutter function, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-17 · published Jul 13, 2021, effective Aug 17, 2021
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2017-17- 01, which applied to certain Airbus Helicopters Model AS332L2 and EC225LP helicopters. AD 2017-17-01 required repetitive inspections of the main rotor blade (MRB) attachment pins. This AD continues to require the repetitive inspections of the MRB attachment pins, and also requires repetitive measurement of the attachment pin chamfer at certain intervals after corrosion removal, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. This AD was prompted by the FAA's determination that it is necessary to measure the attachment pin chamfer after corrosion removal, that replacement of an attachment pin after four corrosion removals is no longer necessary, and that all Airbus Helicopters Model AS332L2 and EC225LP helicopters are affected by the unsafe condition. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-19 · published Jul 13, 2021, effective Aug 17, 2021
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2014-11-02 for Airbus Helicopters Model SA-365N, SA-365N1, AS-365N2, and AS 365 N3 helicopters. AD 2014-11-02 required repetitively inspecting frame number (No.) 9 for a crack. This AD was prompted by Airbus Helicopters developing a modification that provides an optional terminating action for the repetitive inspections required by AD 2014-11-02. This AD retains the requirements of AD 2014-11-02, provides an optional terminating action for the repetitive inspections, and reduces the applicability by excluding certain post-modified helicopters. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-05 · published Jul 14, 2021, effective Aug 18, 2021
Airbus Helicopters Deutschland GmbH Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 A-1, MBB-BK 117 A- 3, MBB-BK 117 A-4, MBB-BK 117 B-1, MBB-BK 117 B-2, and MBB-BK 117 C-1 helicopters. This AD was prompted by a report of sudden severe vibrations and a cracked open blade trailing edge caused by a loosened lead inner weight. This AD requires inspections to determine if any bolted main rotor blades are installed, and replacement of the affected main rotor blades. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-08 · published Jul 15, 2021, effective Aug 19, 2021
Safran Helicopter Engines, S.A. (Type Certificate Previously Held by Turbomeca, S.A.) Turboshaft Engines
The FAA is adopting a new airworthiness directive (AD) for all Safran Helicopter Engines, S.A. Arriel 2C and Arriel 2S1 model turboshaft engines. This AD was prompted by reports of error messages on the full authority digital engine control (FADEC) B digital engine control unit (DECU), caused by blistering of the varnish on the DECU circuit board. This AD requires the replacement of certain FADEC B DECUs. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-07 · published Jul 15, 2021, effective Aug 19, 2021
Airbus Helicopters (Type Certificate Previously Held by Eurocopter France) Helicopters
The FAA is superseding Airworthiness Directive (AD) 2003-25-01 which applied to certain Eurocopter France (now Airbus Helicopters) Models AS332C, AS332C1, AS332L, AS332L1, AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350D, AS355E, AS355F, AS355F1, AS355F2, and AS355N helicopters. AD 2003-25-01 required modifying and re-identifying the hoist operator control unit and replacing certain fuses. This AD was prompted by the identification of multiple errors in the applicable service information for the AS350-series and AS355-series helicopters and of other needed changes. This AD retains certain requirements of AD 2003-25-01, revises the applicability, and requires using corrected service information. This AD also requires reporting certain information and prohibits the installation of an affected hoist until the required actions are accomplished. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-13 · published Jul 20, 2021, effective Aug 24, 2021
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model AW189 helicopters. This AD was prompted by the identification of misleading information in the emergency procedure for the "1(2) FUEL LOW" caution message. This AD requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-16 · published Jul 20, 2021, effective Aug 24, 2021
Airbus Helicopters (Type Certificate Previously Held by Eurocopter France)
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters (type certificate previously held by Eurocopter France) Model SA-365N, SA-365N1, AS-365N2, AS 365 N3, and SA-366G1 helicopters. This AD was prompted by a quality control check that revealed some stretcher attachment holes were improperly located on the frame where there was insufficient edge distance. This AD requires measuring the 9-degree frame flange (frame) for the correct edge distance of the four attachment holes for the stretcher support and inspecting for cracks, and repairing the frame, if necessary, and installation of a reinforcement plate (reinforcing angle), as specified in two Direction G[eacute]n[eacute]rale de l'Aviation Civile (DGAC) ADs, which are incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-18 · published Jul 20, 2021, effective Aug 24, 2021
Leonardo S.p.a. (Type Certificate Previously Held by Agusta S.p.A.) Helicopters
The FAA is superseding Airworthiness Directive (AD) 2011-18-52 for certain Agusta S.p.A. (now Leonardo S.p.a.) Model AB139 and AW139 helicopters. AD 2011-18-52 required revising the life limit for certain part-numbered tail rotor (T/R) blades, updating the helicopter's historical records, repetitively inspecting each T/R blade for a crack or damage, and depending on the results, replacing the T/R blade. This AD was prompted by the manufacturer developing improved T/R blades using different materials and establishing life limits for each improved blade. This AD retains certain requirements from AD 2011-18- 52, revises certain requirements from AD 2011-18-52, and expands the applicability to include the newly-designed T/R blades. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-11-10 · published Jul 23, 2021, effective Aug 27, 2021
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model SA-365N, SA-365N1, AS-365N2, and AS 365 N3 helicopters. This AD was prompted by a report that damage (scorch marks) was found on an internal life raft installation that contained a half rescue kit. This AD requires identifying the part number and serial number of each half rescue kit located in the internal life raft installation and, depending on the findings, inspecting the life raft for damage, inspecting the condition of the flashlight battery, testing the flashlight battery, and replacing the life raft or flashlight battery (including the leak test) as applicable, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-06 · published Jul 23, 2021, effective Aug 27, 2021
Bell Textron Canada Limited (Type Certificate Previously Held by Bell Helicopter Textron Canada Limited)
The FAA is adopting a new airworthiness directive (AD) for certain Bell Helicopter Textron Canada Limited (now Bell Textron Canada Limited) Model 206A, 206B, 206L, 206L-1, 206L-3, and 206L-4 helicopters. This AD was prompted by a report that a certain tail rotor disc assembly, sold as an alternate part, does not conform to the approved configuration. This AD requires determining if an affected part is installed (by doing a maintenance records check or inspection), and if an affected part is found, replacement with a non-affected part. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-09 · published Jul 23, 2021, effective Aug 27, 2021
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. Model AB139 and AW139 helicopters. This AD was prompted by two events of uncommanded emergency flotation system (EFS) deployment during flight. This AD requires replacing certain part- numbered EFS control panels and prohibits installing them. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-11-51 · published Jul 2, 2021, effective Jul 19, 2021
International Aero Engines AG Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain International Aero Engines AG (IAE) V2522-A5, V2524-A5, V2527- A5, V2527E-A5, V2527M-A5, V2530-A5, and V2533-A5 model turbofan engines. This AD was prompted by a review of investigative findings from an event involving an uncontained failure of a high-pressure turbine (HPT) 1st-stage disk that resulted in high-energy debris penetrating the engine cowling. This AD requires an ultrasonic inspection (USI) of affected HPT 1st-stage disks and HPT 2nd-stage disks and, depending on the results of the USI, removal of the affected HPT 1st-stage and HPT 2nd-stage disks from service. The FAA previously sent an emergency AD to all known U.S. owners and operators of these engines and is now issuing this AD to address the unsafe condition on these products.
AD 2021-12-07 · published Jul 8, 2021, effective Aug 12, 2021
Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce Deutschland GmbH, Formerly BMW Rolls-Royce GmbH) Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-710A1-10, BR700-710A2-20 and BR700-710C4-11 model turbofan engines. This AD was prompted by an investigation by RRD, which revealed a quality escape during the high-pressure turbine (HPT) stage 1 disk rim cooling air hole manufacturing process. This AD requires removing affected HPT disks from service prior to reaching specified compliance times or at the next engine shop visit, whichever occurs first. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-06 · published Jul 8, 2021, effective Aug 12, 2021
Pratt & Whitney Turbofan Engines
The FAA is superseding Airworthiness Directive (AD) 2019-21-11 and AD 2020-07-02. AD 2019-21-11 applied to all Pratt & Whitney (PW) PW1519G, PW1521G, PW1521G-3, PW1521GA, PW1524G, PW1524G-3, PW1525G, PW1525G-3, PW1919G, PW1921G, PW1922G, PW1923G, and PW1923G-A model turbofan engines. AD 2020-07-02 applied to all PW PW1519G, PW1521G, PW1521G-3, PW1521GA, PW1524G, PW1524G-3, PW1525G, and PW1525G-3 model turbofan engines. AD 2019-21-11 required initial and repetitive borescope inspections (BSIs) of the low-pressure compressor (LPC) rotor 1 (R1) and, depending on the results of the inspections, replacement of the LPC. AD 2020-07-02 required the removal from service of certain electronic engine control (EEC) full authority digital electronic control (FADEC) software and the installation of a software version eligible for installation. This AD continues to require repetitive BSIs of certain LPC R1s until replacement of EEC FADEC software with the updated software. This AD also requires a BSI after installation of the updated EEC FADEC software if certain Onboard Maintenance Message fault codes are displayed and meet specified criteria. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-01 · published Jul 12, 2021, effective Aug 16, 2021
Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Trent XWB-75, Trent XWB-79, Trent XWB-79B, Trent XWB-84, and Trent XWB-97 model turbofan engines. This AD was prompted by the manufacturer revising the time limits manual (TLM) to incorporate repairs to the low-pressure compressor (LPC) blades and introduce a new fan blade inspection. This AD requires revisions to the airworthiness limitations section (ALS) of the Rolls- Royce (RR) Trent XWB TLM and the operator's existing approved aircraft maintenance program (AMP). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-03 · published Jul 15, 2021, effective Aug 19, 2021
Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by BMW Rolls-Royce GmbH and BMW Rolls-Royce Aero Engines) Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd. & Co KG (RRD) BR700-715A1-30, BR700-715B1-30, and BR700-715C1-30 model turbofan engines. This AD was prompted by reports of HPT stage 1 blades failing in service due to sulphidation and subsequent crack initiation. This AD requires removal and replacement of the HPT stage 1 blade and HPT stage 1 blade damper. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-13-16 · published Jul 21, 2021, effective Aug 25, 2021
General Electric Company Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) GEnx-2B67, GEnx-2B67/P, and GEnx- 2B67B model turbofan engines. This AD was prompted by a report of a crack in the lower fuel manifold causing fuel leakage. This AD requires an ultrasonic inspection (USI) or a fluorescent penetrant inspection (FPI) of the lower fuel manifold. Depending on the results of the USI or FPI, this AD requires replacement of the lower fuel manifold with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-19 · published Jul 21, 2021, effective Aug 5, 2021
International Aero Engines AG Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain International Aero Engines AG (IAE) V2500 model turbofan engines. This AD was prompted by a review of investigative findings from an event involving an uncontained failure of a high-pressure turbine (HPT) 1st-stage disk that resulted in high-energy debris penetrating the engine cowling. This AD requires performance of an ultrasonic inspection (USI) of the HPT 1st-stage disk and HPT 2nd-stage disk and, depending on the results of the inspections, replacement of the HPT 1st-stage disk or HPT 2nd-stage disk with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-11 · published Jul 23, 2021, effective Aug 27, 2021
General Electric Company Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) CF6-80A and CF6-80C2 model turbofan engines. This AD was prompted by an inspection by the manufacturer that revealed cracking of the high-pressure turbine (HPT) rotor stage 1 disk. This AD requires visual inspection and fluorescent penetrant inspection (FPI) of the HPT thermal shield and, if cracking is detected, removal from service of the HPT thermal shield, HPT rotor stage 1 disk and HPT rotor stage 2 disk. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-14-13 · published Jul 28, 2021, effective Sep 1, 2021
Pratt & Whitney Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for all Pratt & Whitney (PW) PW2037, PW2037M, PW2040, and F117-PW-100 model turbofan engines. This AD was prompted by a report of an uncontained engine failure resulting from cracks in the knife edge of the high- pressure turbine (HPT) 2nd-stage air seal assembly. This AD requires fluorescent penetrant inspections (FPIs) and visual inspections of the HPT 2nd-stage air seal assembly and, depending on the results of the inspections, replacement of the HPT 2nd-stage air seal assembly with a part eligible for installation. This AD also requires replacement of the affected HPT 2nd-stage air seal assembly, depending on the engine model, at either the next engine shop visit or the next piece-part opportunity. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-14 · published Jul 26, 2021, effective Aug 30, 2021
Various Restricted Category Helicopters
The FAA is adopting a new airworthiness directive (AD) for various restricted category helicopters, originally manufactured by Bell Textron Inc. (Bell). This AD was prompted by multiple events involving failure of the tail boom attach structure including the bolts. This AD requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter to incorporate pre-flight checks; removing paint and sealant, and cleaning; repetitive inspections of structural components that attach the tail boom to the fuselage; and depending on the outcome of the inspections, repairing or replacing components, or re-bonding the structure. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2021-15-52 · published Jul 29, 2021, effective Aug 13, 2021
Various Restricted Category Helicopters
The FAA is adopting a new airworthiness directive (AD) for various restricted category helicopters originally manufactured by Bell Textron Inc. This AD was prompted by a fatal accident in which an outboard main rotor hub strap pin (pin) sheared off during flight, resulting in the main rotor blade and the main rotor head detaching from the helicopter. This AD requires removing certain pins from service and prohibits installing those pins on any helicopter. The FAA previously sent an emergency AD to all known U.S. owners and operators of these restricted category helicopters and is now issuing this AD to address the unsafe condition on these products.
