43 Airworthiness Directives: 29 airplane, 6 rotorcraft, 7 engine, 1 propeller.
AD 2020-24-09 · published Dec 1, 2020, effective Jan 5, 2021
Piper Aircraft, Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Piper Aircraft, Inc., Model PA-34-220T airplanes. This AD was prompted by a report of damage to the rudder flight control cables and the emergency power supply (EPS) system wiring due to inadequate clearance from the EPS wiring harness. This AD requires inspecting the rudder flight control cables and the EPS wiring for damage, replacing damaged cables and wires if necessary, and re-routing the EPS wiring harness to ensure proper clearance between the EPS and the rudder flight control cables. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-24-11 · published Dec 1, 2020, effective Jan 5, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200, A330-200 Freighter, A330-300, A340-200, A340-300, A340-500, and A340-600 series airplanes. This AD was prompted by a report that an airplane failed to extend its nose landing gear (NLG) using the free fall method, due to loss of the green hydraulic system. This AD requires repetitive tests of affected free fall actuators (FFA), and replacement of any affected FFA with a serviceable FFA, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-24-12 · published Dec 1, 2020, effective Jan 5, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by reports that certain central wing box (CWB) fasteners had rotated inside the fastener holes due to insufficient friction for the application. This AD requires replacement of the affected fasteners, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-01 · published Dec 7, 2020, effective Jan 11, 2021
Textron Aviation, Inc. Airplanes (Type Certificate Previously Held by Beechcraft Corporation)
The FAA is adopting a new airworthiness directive (AD) for certain Textron Aviation Inc. (Textron) (type certificate previously held by Beechcraft Corporation) Models F90, 65-90, 65-A90, B90, C90, H90 (T-44A), E90, 65-A90-1 (JU-21A, U-21A, RU-21A, RU-21D, U-21G, RU- 21H), 65-A90-2 (RU-21B), 65-A90-3 (RU-21C), 65-A90-4 (RU-21E, RU-21H), 99, 99A, 99A (FACH), A99, A99A, B99, C99, 100, A100 (U-21F), and B100 airplanes. This AD was prompted by reports of fatigue cracks in the lower forward wing fitting. This AD requires a one-time inspection for the presence of washer part number (P/N) 90-380058-1 on the left-hand (LH) and right-hand (RH) lower forward wing bolt and, if applicable, removing washer P/N 90-380058-1, inspecting the wing fitting, bolt, and nut, replacing the wing fitting if it is cracked, and replacing the washer with washer P/N 90-380019-1. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-21-16 · published Dec 10, 2020, effective Jan 14, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. This AD was prompted by a determination that the upper wing skin at engine nacelle points may be subject to undetected cracking. This AD requires repetitive ultrasonic inspections of the upper wing skin at certain engine strut positions for cracking; repetitive detailed and ultrasonic inspections of the strut lower spar fitting, diagonal brace strut end clevis, and diagonal brace wing attach end clevis for cracking; repetitive detailed inspections of lower link fitting at certain engine strut positions for cracking; and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-21-17 · published Dec 10, 2020, effective Jan 14, 2021
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-16- 05, which applied to certain The Boeing Company Model 757 airplanes. AD 2018-16-05 required repetitive inspections for skin cracking and shim migration at the upper link drag fittings, diagonal brace cracking, and fastener looseness; and applicable on-condition actions. This AD retains the actions required by AD 2018-16-05, reduces the compliance times for certain inspections, and adds repetitive inspections at certain fastener hole locations and applicable on-condition actions. This AD was prompted by reports of bolt rotation in the engine drag fitting joint and fastener heads; an inspection of the fastener holes revealed that cracks were found in the skin. This AD was also prompted by a report of multiple cracks in the drag fitting at fastener holes found during an inspection required by AD 2018-16-05. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-22-10 · published Dec 10, 2020, effective Jan 14, 2021
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-14- 02, which applied to certain The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. AD 2018-14-02 required an inspection for foam insulation on the dripshield above the overhead panel support structure and replacement if necessary. For certain airplanes, AD 2018- 14-02 also required replacement of foam insulation on the overhead panel support structure. This AD continues to require the actions in AD 2018-14-02, and, for certain airplanes, this AD requires an inspection of the foam insulation on the overhead panel support structure, and replacement if necessary. This AD was prompted by reports that additional areas of Boeing Material Specification (BMS) 8-39 flexible urethane foam were found on the overhead panel support structure in the flight compartment. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-03 · published Dec 10, 2020, effective Dec 28, 2020
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-01- 17, which applied to all Airbus SAS Model A318, A319, A320, and A321 series airplanes. AD 2020-01-17 required repetitive checks of the pressure gauges on the inflation reservoir of each emergency escape slide/raft to determine the amount of pressure and, depending on findings, accomplishment of applicable corrective actions. This AD retains the requirements of AD 2020-01-17, expands the list of affected parts to be checked, and provides optional terminating action for the repetitive checks; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by the determination that certain parts that were not identified in AD 2020-01-17 are also subject to the unsafe condition. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-24-04 · published Dec 14, 2020, effective Dec 18, 2020
The Boeing Company Airplanes
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. As published, the regulatory text of the AD included errors in certain references to the airplane flight manual (AFM) that is required to be revised. This document corrects those errors. In all other respects, the original document remains the same.
AD 2020-25-02 · published Dec 16, 2020, effective Jan 21, 2021
Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes; and Model SAAB 2000 airplanes. This AD was prompted by reports that certain nose landing gear (NLG) door attachment bolts are susceptible to hydrogen embrittlement. This AD requires replacing certain NLG door attachment bolts with serviceable bolts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-07 · published Dec 16, 2020, effective Jan 21, 2021
Embraer S.A. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model EMB-550 and EMB-545 airplanes. This AD was prompted by reports of cracks, delamination, and failure of the flight deck side windows during certification fatigue tests. This AD requires repetitive inspections of the flight deck side windows for any cracking or delamination, corrective action if necessary, and eventual replacement of the windows, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-08 · published Dec 16, 2020, effective Jan 21, 2021
Yaborã Indústria Aeronáutica S.A. (Type Certificate Previously Held by Embraer S.A.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica S.A. Model ERJ 170 airplanes and Model ERJ 190-100 STD, -100 LR, -100 ECJ, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes. This AD was prompted by reports of installation of inverted poles of the horizontal stabilizer pitch trim switches on the control yokes, which causes opposite commands for the horizontal stabilizer. This AD requires installing supports for the horizontal stabilizer control yoke pitch trim switches and re-identifying the control yokes, as specified in two Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) ADs, which are incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-02 · published Dec 17, 2020, effective Jan 4, 2021
Yaborã Indústria Aeronáutica S.A. (Type Certificate Previously Held by Embraer S.A.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica S.A. (type certificate previously held by Embraer S.A.) Model ERJ 190-400 airplanes. This AD was prompted by a report of an in-flight shutdown (IFSD) due in part to failure in the low-pressure compressor (LPC) rotor 1 during operation in high altitude at high thrust settings. This AD requires amending the airplane flight manual (AFM) to incorporate a new limitation and revise certain normal procedures, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-05 · published Dec 17, 2020, effective Dec 17, 2020
Textron Aviation Inc. (Type Certificate Previously Held by Cessna Aircraft Company) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Textron Aviation Inc. (type certificate previously held by Cessna Aircraft Company) Model 560XL airplanes. This AD was prompted by an incident where a Model 560XL airplane experienced an uncommanded engine acceleration with the left engine throttle unresponsive to power commands, including engine shut-off. This AD requires an inspection of the rivet of the left and right throttle quadrant assembly (TQA) sensor link and sensor drive arm pivot for correct installation and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-17 · published Dec 17, 2020, effective Jan 4, 2021
ATR-GIE Avions de Transport Régional Airplanes
The FAA is adopting a new airworthiness directive (AD) for all ATR--GIE Avions de Transport R[eacute]gional Model ATR42-500 and ATR72 airplanes. This AD was prompted by a report of damage found on a wire bundle connecting an angle-of-attack (AOA) probe and a multi-function computer (MFC), which can inhibit activation of the stick pusher without any indication to the flight crew by the stall warning system. This AD requires a repetitive operational test for discrepancies of the stall warning system and stick pusher in the flight configuration, an inspection for discrepancies in the wiring bundles between AOA probes and MFCs, and corrective action if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-24-10 · published Dec 18, 2020, effective Jan 22, 2021
Aerostar Aircraft Corporation Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Aerostar Aircraft Corporation (Aerostar) Model PA-60-601P (Aerostar 601P), PA-60-602P (Aerostar 602P), and PA-60-700P (Aerostar 700P) airplanes. This AD was prompted by reports of corrosion on the elevator and aileron balance tubes. This AD requires repetitively inspecting the elevator and aileron balance tubes for corrosion and rust and replacing the tube. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-01 · published Dec 18, 2020, effective Jan 4, 2021
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-03- 18, which applied to all Airbus SAS Model A318-111, -112, -121, and - 122 airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; and Model A320-211, -212, -214, -216, -231, -232, and - 233 airplanes. AD 2019-03-18 required repetitive general visual inspections for cracks, and replacement if necessary, of certain main landing gear (MLG) sliding tubes that were subject to improperly performed magnetic particle inspections. This AD continues to require repetitive general visual inspections of the affected MLG sliding tubes for cracks and replacement if necessary, and requires inspections, and replacement if necessary, of additional MLG sliding tubes; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by the identification of additional MLG sliding tubes that might have been subject to the same improperly performed magnetic particle inspection. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-04 · published Dec 21, 2020, effective Jan 25, 2021
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2013-18- 08, which applied to certain The Boeing Company Model 737-200, -200C, - 300, -400, and -500 series airplanes. AD 2013-18-08 required repetitive inspections for cracking of certain skin panels of the fuselage, and of the fuselage skin along certain chem-milled lines, and corrective actions if necessary. AD 2013-18-08 also included a terminating action for the repetitive inspections of certain areas. This AD retains those actions, expands the nondestructive inspection (NDI) area, and adds airplanes to the applicability. This AD was prompted by reports of additional cracking in certain horizontal and vertical chem-milled step locations outside of those identified in AD 2013-18-08. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-07 · published Dec 21, 2020, effective Jan 25, 2021
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-23- 05, which applied to all Dassault Aviation Model MYSTERE-FALCON 900 airplanes. AD 2019-23-05 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD continues to require revising the existing maintenance or inspection program, as applicable, to incorporate those new or more restrictive airworthiness limitations, and also requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-06 · published Dec 23, 2020, effective Jan 27, 2021
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report that corrosion was found on the shock strut cylinders during unscheduled maintenance of the nose landing gear (NLG). This AD requires a modification of the NLG shock strut cylinder. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-08 · published Dec 23, 2020, effective Jan 27, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for The Boeing Company Model 787-8, 787-9, and 787-10 airplanes powered by Rolls Royce Trent 1000 engines. This AD was prompted by reports of damage to the inner fixed structure (IFS) forward upper fire seal and damage to thermal insulation blankets in the forward upper area of the thrust reverser (TR). This AD requires repetitive inspections of the IFS forward upper fire seal and thermal insulation blankets in the forward upper area of the TR for damage and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-09 · published Dec 23, 2020, effective Jan 27, 2021
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by a report of cracks found in fastener holes at a certain station of the center wing box. This AD requires repetitive external surface high frequency eddy current (HFEC) inspections and repetitive external surface ultrasonic inspections; or repetitive internal detailed inspections; of a certain station of the center wing box for any cracking, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-11 · published Dec 23, 2020, effective Jan 27, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A300 F4-605R airplanes and Model A310-324 airplanes. This AD was prompted by a report that certain emergency locator transmitter (ELT) lithium batteries lack protection against current injection. This AD requires modification of the airplane circuit connecting the ELT battery, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-12 · published Dec 28, 2020, effective Feb 1, 2021
Gulfstream Aerospace LP Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace LP Model Gulfstream G280 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a Civil Aviation Authority of Israel (CAAI) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-14 · published Dec 29, 2020, effective Feb 2, 2021
Mitsubishi Heavy Industries, Ltd. Airplanes
The FAA is superseding Airworthiness Directive (AD) 75-16-20, which applied to all Mitsubishi Heavy Industries, Ltd., Model MU-2B, MU-2B-10, MU-2B-15, MU-2B-20, MU-2B-25, MU-2B-26, MU-2B-30, MU-2B-35, and MU-2B-36 airplanes. AD 75-16-20 required repetitive inspections of the propeller pitch control (PPC) lever for security and proper rigging. This AD requires modification and repetitive inspections of the PPC lever linkage. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-15 · published Dec 29, 2020, effective Feb 2, 2021
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2016-07- 14, which applied to certain Airbus Model A319-111, -112, -113, -114, - 115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, -212, - 213, -231, and -232 airplanes. AD 2016-07-14 required replacing the clips, shear webs, and angles, related investigative actions, and repair if necessary. This AD retains the actions of AD 2016-07-14, and requires modifying (replacing) the clips, shear webs, and angles at a certain rear fuselage area with new parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA has also determined that additional airplanes are subject to the unsafe condition. This AD was prompted by fatigue testing that determined that fatigue damage could appear on clips, shear webs, and angles at certain rear fuselage sections and certain frames. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-18 · published Dec 30, 2020, effective Jan 14, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -343, and -941 airplanes. This AD was prompted by a report that during an inspection of the wing/fuselage fillet interface, evidence of black stains and white oxidation was found on several areas of the fillet fairing adjustable rods due to surface corrosion. This AD requires replacing each affected fillet fairing adjustable rod with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-20 · published Dec 30, 2020, effective Feb 3, 2021
Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a report that during installation on the final assembly line, a foreign object damage (FOD) protective end cap was not removed from an extraction duct of the crew oxygen system. The protective end cap must be removed to prevent a build-up of oxygen under the flight deck floor, which is a fire risk. This AD requires inspecting the air extraction duct installation to determine if a protective end cap is installed, and removing any protective end cap found. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-21 · published Dec 30, 2020, effective Feb 3, 2021
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by a report that during the assembly of a certain section of the fuselage, the gaps found on self-aligning nuts for eight fasteners were out of tolerance. This AD requires a rotating probe test of all fastener holes located in the affected area for any discrepancies, an eddy current inspection of the surrounding flange for any discrepancies, a detailed inspection of certain frames for any discrepancies, and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-24-03 · published Dec 1, 2020, effective Dec 16, 2020
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS350B, AS350BA, AS350B1, AS350B2, AS350D, AS355E, AS355F, AS355F1, and AS355F2 helicopters. This AD requires testing the UP/DOWN switches of a certain part-numbered DUNLOP cyclic stick grip, installing a placard, and revising the existing Rotorcraft Flight Manual (RFM) for your helicopter, or removing the DUNLOP cyclic stick grip. This AD was prompted by an inadvertent activation of the rescue hoist cable cutter. The actions of this AD are intended to address an unsafe condition on these products.
AD 2020-24-07 · published Dec 8, 2020, effective Jan 12, 2021
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2018-26-02 for Airbus Helicopters (previously Eurocopter France) Model AS350B3, EC130B4, and EC130T2 helicopters. AD 2018-26-02 required inspecting the pilot's and co-pilot's throttle twist for proper operation. This new AD retains the requirements of AD 2018-26-02 and adds calendar time compliance times for the required actions. This AD was prompted by a public comment that prompted additional review. The actions of this AD are intended to address an unsafe condition on these products.
AD 2020-25-11 · published Dec 16, 2020, effective Jan 21, 2021
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2014-12- 12, which applied to certain Airbus Helicopters Model EC120B and EC130B4 helicopters. AD 2014-12-12 required inspecting and, if necessary, replacing parts of the sliding door star support attachment assembly. This AD requires modifying the sliding door star support stringer as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). This AD was prompted by several incidents involving helicopter left-hand side doors (both swinging and sliding) that revealed weaknesses in the locking mechanism. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-03 · published Dec 18, 2020, effective Jan 22, 2021
Airbus Helicopters Deutschland GmbH Helicopters
The FAA is superseding Airworthiness Directive (AD) 2007-26-51 which applied to certain Airbus Helicopters Deutschland GmbH Model EC135 helicopters. AD 2007-26-51 required inspecting the tail rotor control rod (control rod) and ball pivot and, depending on findings, replacing those parts. This new AD requires inspecting certain ball pivots, applying corrosion preventative compound on the ball pivot, and corrective action, as applicable. This AD also requires replacing the control rod with a newly developed control rod. This AD was prompted by the manufacturer's development of a new control rod, which the FAA has determined must be installed in order to address the identified unsafe condition. The actions of this AD are intended to address an unsafe condition on these products.
AD 2020-26-10 · published Dec 28, 2020, effective Feb 1, 2021
Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. (Leonardo) Model A119 and AW119 MKII helicopters. This AD requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter and installing a placard to prohibit intentional entry into autorotation. This AD would also allow replacement of an affected fuel control unit (FCU) as an optional terminating action for the RFM revision and placard installation. This AD was prompted by reports that certain FCUs may not have been calibrated to specification during overhaul. The actions of this AD are intended to address an unsafe condition on these products.
AD 2020-26-13 · published Dec 28, 2020, effective Feb 1, 2021
Sikorsky Aircraft Corporation Helicopters
The FAA is adopting a new airworthiness directive (AD) for Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters. This AD was prompted by seven incidents of fatigue cracks in the horizontal stabilizer root fitting FWD (forward root fitting). This AD requires establishing the life limit of certain part-numbered forward root fittings, establishing the life limit of certain part-numbered stabilizer strut fittings, repetitively inspecting certain parts, and depending on the inspection results, removing parts from service. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-04 · published Dec 4, 2020, effective Jan 8, 2021
Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA is superseding Airworthiness Directive (AD) 2016-24-08 for all Rolls-Royce Deutschland Ltd. & Co KG (RRD) RB211-Trent 875-17, RB211-Trent 877-17, RB211-Trent 884-17, RB211-Trent 884B-17, RB211- Trent 892-17, RB211-Trent 892B-17, and RB211-Trent 895-17 model turbofan engines. AD 2016-24-08 required repetitive inspections of the engine upper bifurcation nose fairing assembly and repair or replacement of any fairing assembly that fails inspection. This AD retains the requirements to perform repetitive inspections of the engine upper bifurcation nose fairing assembly and repair or replacement of any fairing assembly that fails inspection. As a terminating action to these inspections, this AD also requires the modification of the engine upper bifurcation nose fairing assembly. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-09 · published Dec 10, 2020, effective Jan 14, 2021
Pratt & Whitney Division Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for all Pratt & Whitney Division (PW) PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, and PW4170 model turbofan engines with a certain outer combustion chamber assembly and 3rd stage low-pressure turbine (LPT) duct segments installed. This AD was prompted by reports of damaged or failed 3rd stage LPT duct segments on PW engines with the Talon IIB outer combustion chamber assembly configuration installed. This AD requires removing and replacing certain 3rd stage LPT duct segments. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-12 · published Dec 11, 2020, effective Jan 15, 2021
Superior Air Parts, Inc. Engines and Lycoming Engines Reciprocating Engines With a Certain SAP Crankshaft Assembly
The FAA is adopting a new airworthiness directive (AD) for all Superior Air Parts, Inc. (SAP) Model IO-360-series and O-360-series reciprocating engines and certain Lycoming Engines (Lycoming) Model AEIO-360-, IO-360-, and O-360-series reciprocating engines with a certain SAP crankshaft assembly installed. This SAP crankshaft assembly is installed as original equipment on the affected SAP engines and as a replacement part under parts manufacturer approval (PMA) on the affected Lycoming engines. This AD was prompted by three crankshaft assembly failures that resulted in the loss of engine power and immediate or emergency landings. This AD requires the removal from service of all affected crankshaft assemblies. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-26-06 · published Dec 14, 2020, effective Dec 29, 2020
Technify Motors GmbH (Type Certificate Previously Held by Thielert Aircraft Engines GmbH) Reciprocating Engines
The FAA is adopting a new airworthiness directive (AD) for certain Technify Motors GmbH TAE 125-02-99 and TAE 125-02-114 model reciprocating engines. This AD was prompted by a report of a defective turbocharger hose discovered on an airplane during a pre-flight inspection. This AD requires the removal and replacement of the affected turbocharger hose. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-10 · published Dec 16, 2020, effective Jan 21, 2021
General Electric Company Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for all General Electric Company (GE) GEnx-1B64/P2, GEnx-1B67/P2, GEnx-1B70/75/ P2, GEnx-1B70/P2, GEnx-1B70C/P2, GEnx-1B74/75/P2, GEnx-1B76/P2, GEnx- 1B76A/P2, and GEnx-2B67/P model turbofan engines with a certain high- pressure turbine (HPT) rotor stage 2 disk installed. This AD was prompted by a report of the potential for undetected subsurface anomalies formed during the manufacturing process that could result in uncontained failure of the HPT rotor stage 2 disk. This AD requires an immersion ultrasonic inspection (USI) of the HPT rotor stage 2 disk and, depending on the results of the inspection, replacement of the HPT rotor stage 2 disk with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-24-08 · published Dec 18, 2020, effective Jan 4, 2021
Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) (RRD) RB211 Trent 768-60, 772-60, 772B-60 and 772C-60 model turbofan engines. This AD requires replacement of high-pressure turbine (HPT) blades with parts eligible for installation before exceeding specified flight cycles since new. This AD was prompted by several reports from the manufacturer that HPT blades on RB211 Trent 700 model turbofan engines have been subject to high levels of corrosion fatigue, leading to blade cracking and eventual release, resulting in an aborted take-off and in-flight shut- downs. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-13 · published Dec 21, 2020, effective Jan 25, 2021
CFM International, S.A. Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) LEAP-1A23, LEAP-1A24, LEAP- 1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, LEAP-1A35A model turbofan engines. This AD was prompted by an investigation by CFM that showed a subsurface anomaly in a part manufactured using the same material as the LEAP-1A high-pressure turbine (HPT) stage 2 disk. This AD requires an ultrasonic inspection (UI) of the HPT stage 2 disk and replacement of any HPT stage 2 disk that fails the UI with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-25-05 · published Dec 7, 2020, effective Dec 22, 2020
Hoffmann GmbH & Co. KG Propellers
The FAA is adopting a new airworthiness directive (AD) for all Hoffmann GmbH & Co. KG (Hoffmann) model HO-V 72 propellers. This AD was prompted by reports of cracks at different positions on two affected propeller hubs. This AD requires amending the existing aircraft flight manual (AFM) with abnormal propeller vibration instructions. This AD requires visual inspection and non-destructive test (NDT) inspection of the propeller hub and, depending on the results of the inspections, replacement of the propeller hub with a part eligible for installation. This AD also requires replacement of the propeller hub before exceeding 30 years since the date of manufacture or within 30 days after the effective date of this AD, whichever occurs later. The FAA is issuing this AD to address the unsafe condition on these products.
