Airworthiness Directive · Amendment 39-21370 · Fuselage
Airbus SAS Airplanes
This AD applies to Airbus SAS airplanes specified in paragraphs (c)(1) through (3) of this AD, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2020-0153, dated July 10, 2020 (EASA AD 2020-0153).
(1) Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes.
(2) Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes.
(3) Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes.
The FAA is superseding Airworthiness Directive (AD) 2016-07- 14, which applied to certain Airbus Model A319-111, -112, -113, -114, - 115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, -212, - 213, -231, and -232 airplanes. AD 2016-07-14 required replacing the clips, shear webs, and angles, related investigative actions, and repair if necessary. This AD retains the actions of AD 2016-07-14, and requires modifying (replacing) the clips, shear webs, and angles at a certain rear fuselage area with new parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA has also determined that additional airplanes are subject to the unsafe condition. This AD was prompted by fatigue testing that determined that fatigue damage could appear on clips, shear webs, and angles at certain rear fuselage sections and certain frames. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2020-0153.
The “Remarks” section of EASA AD 2020-0153 does not apply to this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
