18 Airworthiness Directives.
AD 2019-22-07 · published Jan 6, 2020, effective Feb 10, 2020
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, Model CL-600-2C10 (Regional Jet Series 700, 701 & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, Model CL-600-2D24 (Regional Jet Series 900) airplanes, and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a report that during Automatic Flight Control System (AFCS) ALTS CAP or (V) ALTS CAP mode, the flight guidance/autopilot does not account for engine failure while capturing an altitude. This AD requires revising the existing airplane flight manual (AFM) to include a limitation and an abnormal operating procedure for the AFCS. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-25-10 · published Jan 6, 2020, effective Feb 10, 2020
Fokker Services B.V. Airplanes
We are adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD was prompted by reports of fuselage bottom skin exfoliation corrosion, fuselage skin bulging and cracking, and missing fastener heads. This AD requires a detailed inspection of the fuselage bottom skin for corrosion; skin cracks or bulges; and missing, loose, or broken fasteners; and, depending on the findings, accomplishment of applicable repairs; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. We are issuing this AD to address the unsafe condition on these products.
AD 2019-25-11 · published Jan 6, 2020, effective Feb 10, 2020
Viking Air Limited (Type Certificate Previously Held by Bombardier, Inc.; Canadair Limited) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Viking Air Limited Model CL-215-1A10 and CL-215-6B11 (CL-215T Variant) airplanes. This AD was prompted by reports of cracks on the wing lower skin under the drag angle at a certain wing station (WS). This AD requires a one-time inspection of the wing lower skin under the drag angle at a certain WS to determine if a certain repair or modification has been accomplished; repetitive visual inspections of certain fuselage structures; repetitive eddy current inspections of the front spar along a certain WS reference line, the drag angle, and all fastener holes; repetitive structural gap checks of a certain surface; and corrective actions if necessary. This AD also requires replacing certain rivets with certain fasteners, and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-25-12 · published Jan 6, 2020, effective Jan 21, 2020
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2016-18- 02, which applied to certain The Boeing Company Model 777-200 and - 300ER series airplanes. AD 2016-18-02 required replacing the low- pressure oxygen flex hoses with new non-conductive low-pressure oxygen flex hoses in the gaseous passenger oxygen system in airplanes equipped with therapeutic oxygen. This AD retains those actions and adds actions for certain airplanes. AD 2016-18-02 was prompted by the determination that the low-pressure oxygen flex hoses in the gaseous passenger oxygen system can potentially be conductive. This AD was further prompted by the determination that the associated service information is inadequate for certain airplanes. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-25-14 · published Jan 6, 2020, effective Feb 10, 2020
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-300ER and 777F series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the fuselage stringers, stringer splices, and skin splice straps are subject to widespread fatigue damage (WFD). This AD requires repetitive detailed inspections of certain stringer splices and skin splice straps for any cracks, repetitive high frequency eddy current (HFEC) inspections of certain stringers and stringer splices for any cracks, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-25-15 · published Jan 6, 2020, effective Feb 10, 2020
Fokker Services B.V. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0100 airplanes. This AD was prompted by reports of smoke in the flight deck, in conjunction with the loss of electrical power. This AD requires replacement of affected generator power transfer contactors (GPTCs), essential bus transfer contactors (EBTCs), and auxiliary power transfer contactors (APTCs), as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-25-16 · published Jan 6, 2020, effective Feb 10, 2020
Embraer S.A. Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-06- 08, which applied to certain Embraer S.A. Model ERJ 170-100 LR, -100 STD, -100 SE, and -100 SU airplanes; and Model ERJ 170-200 LR, -200 SU, and -200 STD airplanes. AD 2017-06-08 required revising the existing maintenance or inspection program, as applicable, to incorporate more restrictive airworthiness limitations. This AD continues to require that revision; adds a new requirement for revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations; and adds airplanes to the applicability. Since the FAA issued AD 2017-06-08, the agency determined that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-25-18 · published Jan 6, 2020, effective Jan 21, 2020
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by a report of a wing stall (wing drop/ uncommanded roll) during landing flare, due to ice on the wing leading edges that was not detected by the anti-ice system. This AD requires revising the existing airplane flight manual (AFM) to include a limitation and normal operating procedure for the wing anti-ice system. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-24-01 · published Jan 15, 2020, effective Feb 19, 2020
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for Airbus SAS Model A318 and A319 series airplanes; Model A320-211, -212, -214, -231, -232, and -233 airplanes; Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes; Model A330-200 and A330-200 Freighter series airplanes; Model A340-200 and -300 series airplanes; and Model A340-500 and -600 airplanes (except for airplanes equipped with flammability reduction means (FRM) approved by the FAA as compliant with the Fuel Tank Flammability Reduction (FTFR) rule). This AD was prompted by the FAA's analysis of the fuel system reviews on these models conducted by the manufacturer. This AD requires modifying the fuel quantity indicating system (FQIS) to prevent development of an ignition source inside the center fuel tank due to electrical fault conditions. This AD also provides alternative actions for cargo airplanes. This AD does not apply to airplanes equipped with FRM approved by the FAA. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-25-19 · published Jan 16, 2020, effective Feb 20, 2020
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 airplanes. This AD was prompted by a report of dislodged passenger door girt bars. This AD requires modification of the girt bar retention mechanism of the affected doors, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-01-11 · published Jan 17, 2020, effective Feb 21, 2020
The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-12- 07, which applied to certain The Boeing Company Model 737-800, -900, and -900ER series airplanes. AD 2017-12-07 required replacing the affected left temperature control valve and control cabin trim air modulating valve. This AD retains the requirements of AD 2017-12-07, expands the applicability to include additional airplanes, and adds a new requirement for certain airplanes to identify and replace the affected parts. This AD was prompted by reports of in-flight failure of the left temperature control valve and control cabin trim air modulating valve. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-25-55 · published Jan 21, 2020, effective Jan 21, 2020
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for The Boeing Company Model 737-300, -400, and -700 series airplanes, modified to a Bedek Division Special Freighter (BDSF) by Supplemental Type Certificate (STC) ST01566LA, ST01961SE, or ST02556SE, with a 9G rigid barrier. An emergency AD was sent to all known U.S. owners and operators of these airplanes. This AD requires complying with loading restrictions and methods. This AD was prompted by a review of the manufacturing process for the 9G rigid barrier installed on BDSF conversions that identified a manufacturing non-compliance. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-25-20 · published Jan 24, 2020, effective Feb 28, 2020
Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G airplanes, type certificated in any category; and Model C-130A, C-130B, C-130BL, C-130E, C-130H, C-130H-30, C-130J, C-130J-30, EC-130Q, HC-130H, KC-130H, NC-130B, NC-130, and WC- 130H airplanes, type certificated in the restricted or amateur category. This AD was prompted by a report indicating that two elevator booster assemblies experienced significant hydraulic fluid leaks, caused by fatigue cracks in the actuator cylinder. This AD requires an inspection to determine the part number of the elevator booster actuator, repetitive ultrasonic inspections of the actuator to detect cracking, and replacement of cracked elevator booster assemblies. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-26-01 · published Jan 24, 2020, effective Feb 28, 2020
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of sealant bead damage caused by rotation of the attachment fitting bearing assembly of a trimmable horizontal stabilizer (THS). This AD requires repetitive detailed inspections, and applicable corrective action(s) if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. In addition, as specified in the EASA AD, this AD provides an optional modification that would terminate the inspections. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-01-14 · published Jan 24, 2020, effective Feb 28, 2020
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 series airplanes. This AD was prompted by a report that indicated that bleed and air conditioning systems were contaminated by hydraulic fluid, and by an investigation that revealed that hydraulic fluid contaminations caused the failure of check valves installed on the hydraulic reservoir air pressurization system. This AD requires repetitive functional tests of the hydraulic reservoir air pressurization lines, and repair or replacement if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-01-12 · published Jan 30, 2020, effective Feb 14, 2020
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, - 114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, - 211, -212, -213, -231, and -232 airplanes. This AD was prompted by the absence of a requirement to remove a certain Emergency Procedure in the existing Aircraft Flight Manual (AFM) after accomplishing a certain modification or replacement. This AD requires, for airplanes on which a certain modification or replacement is done, revising the AFM by removing a certain Emergency Procedure in the AFM, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-01-13 · published Jan 30, 2020, effective Mar 5, 2020
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-19- 26, which applied to all Dassault Aviation Model MYSTERE-FALCON 200 airplanes. AD 2018-19-26 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations. This AD continues to require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2020-01-17 · published Jan 30, 2020, effective Feb 14, 2020
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 series airplanes; Model A319 series airplanes; Model A320 series airplanes; and Model A321 series airplanes. This AD was prompted by a report that during airplane boarding a loud bang was heard. A subsequent inspection revealed that one emergency escape slide/raft was found with zero reservoir pressure, due to a burst rupture disk assembly in the inflation reservoir, which was probably caused by a manufacturing defect. This AD requires repetitive checks of the pressure gauges on the inflation reservoir of each emergency escape slide/raft to determine the amount of pressure and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
