Airworthiness Directive · Amendment 39-19819 · Time limits/maintenance checks
Dassault Aviation Airplanes
Superseded. A later AD replaced this one: AD 2023-21-01. Comply with the one in force.
This AD applies to all Dassault Aviation Model MYSTERE-FALCON 200 airplanes, certificated in any category.
The FAA is superseding Airworthiness Directive (AD) 2018-19- 26, which applied to all Dassault Aviation Model MYSTERE-FALCON 200 airplanes. AD 2018-19-26 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations. This AD continues to require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address the unsafe condition on these products.
This paragraph restates the requirements of paragraph (g) of AD 2018-19-26, with no changes. Within 90 days after November 5, 2018 (the effective date of AD 2018-19-26), revise the existing maintenance or inspection program, as applicable, to incorporate Chapter 5-40-00, Airworthiness Limitations, Revision 17, dated December 20, 2017, of the Dassault Falcon 200 Maintenance Manual. The initial compliance time for accomplishing the actions is at the applicable time specified in Chapter 5-40-00, Airworthiness Limitations, Revision 17, dated December 20, 2017, of the Dassault Falcon 200 Maintenance Manual; or within 90 days after November 5, 2018; whichever occurs later.
This paragraph restates the requirements of paragraph (h) of AD 2018-19-26, with a new exception. Except as required by paragraph (i) of this AD, after the existing maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (l)(1) of this AD.
Within 90 days after the effective date of this AD, revise the existing maintenance or inspection program, as applicable, to incorporate the information specified in Chapter 5-40-00, Airworthiness Limitations, Revision 18, dated January 15, 2019, of the Dassault Falcon 200 Maintenance Manual. The initial compliance time for doing the tasks is at the time specified in Chapter 5-40-00, Airworthiness Limitations, Revision 18, dated January 15, 2019, of the Dassault Falcon 200 Maintenance Manual, or within 90 days after the effective date of this AD, whichever occurs later.
After the existing maintenance or inspection program has been revised as required by paragraph (i) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an AMOC in accordance with the procedures specified in paragraph (l)(1) of this AD.
Accomplishing the actions required by paragraph (g) or (i) of this AD terminates the requirements of paragraph (g)(1) of AD 2010-26-05, for Dassault Aviation Model MYSTERE-FALCON 200 airplanes.
