26 Airworthiness Directives: 21 airplane, 2 rotorcraft, 2 engine, 1 various.
AD 2019-16-08 · published Oct 1, 2019, effective Nov 5, 2019
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-22- 13, which applied to certain Airbus SAS Model A350-941 and -1041 airplanes. AD 2018-22-13 required revising the existing airplane flight manual (AFM) to provide the flightcrew with updated procedures related to inboard aileron fault operations. This AD continues to require that AFM revision, and also requires modification of the electronic centralized aircraft monitoring (ECAM) procedures by installing an Airbus temporary quick change (ATQC) and activating an ECAM temporary change. This AD was prompted by a technical issue detected on the inboard aileron electrohydrostatic actuators that caused potential erroneous monitoring of those actuators. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-06 · published Oct 1, 2019, effective Nov 5, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-202, -243, -243F, -302, -323, and -343 airplanes. This AD was prompted by a report that cracks have been found within the ring gears of the slat geared rotary actuators (SGRAs) due to a change in the manufacturing process and inadequate post-production non-destructive testing for potential cracking. This AD requires an inspection to determine the part number and serial number of the SGRAs, and replacement of each affected SGRA with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-07 · published Oct 1, 2019, effective Nov 5, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 series airplanes; Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Airbus SAS Model A310 series airplanes. This AD was prompted by a report indicating that the trimmable horizontal stabilizer (THS) actuator ball nut trunnion lower attachment was missing parts. This AD requires a one-time detailed inspection of the THS actuator right-hand spherical bearing and retaining parts (bolt, tab washer, and end cap) for correct installation of the retaining parts and correct bolt position, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-09 · published Oct 1, 2019, effective Nov 5, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200 Freighter, A330-200, and A330-300 series airplanes. This AD was prompted by an analysis conducted on Airbus SAS Model A330-200 Freighter, A330-200, and A330-300 series airplanes that identified structural areas that are susceptible to widespread fatigue damage (WFD). This AD requires reinforcement modifications of various structural parts of the fuselage, and applicable related investigative and corrective actions if necessary, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-20-02 · published Oct 3, 2019, effective Oct 3, 2019
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD requires repetitive inspections for cracking of the left and right hand side outboard chords of frame fittings and failsafe straps at a certain station, and repair if any cracking is found. This AD was prompted by reports of cracking discovered in this area. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-05 · published Oct 9, 2019, effective Nov 13, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of disconnections of certain hinge arms of the bulk cargo door (BCD) due to disbonding of the hinge arm bushes. This AD requires either modifying and re-identifying affected BCDs or replacing affected BCDs, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-16 · published Oct 9, 2019, effective Nov 13, 2019
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-05- 09, which applied to certain Airbus SAS Model A320-251N and -271N airplanes, and Model A321-253N airplanes. AD 2019-05-09 required repetitive detailed inspections of certain electrical harnesses for discrepancies, and corrective actions if necessary. AD 2019-05-09 also provided an optional terminating modification for the repetitive detailed inspections. This AD retains the actions of AD 2019-05-09, and adds a requirement for a terminating modification for the repetitive detailed inspections, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by reports of low clearance between the electrical harness and nearby hydraulic pipes in the inboard trailing edge of the wing. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-16-13 · published Oct 10, 2019, effective Nov 14, 2019
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200 and -300 series airplanes. This AD was prompted by reports of unreliable performance of the water and fuel scavenge system; failure of the fuel scavenge function can cause trapped fuel, resulting in unavailable fuel reserves. This AD requires incorporating operating limitations; or modifying the water and fuel scavenge systems in the fuel tanks, modifying the fuel jettison system, making electrical changes in the main equipment center, modifying the wiring in certain panels, and installing new software. We are issuing this AD to address the unsafe condition on these products.
AD 2019-19-14 · published Oct 10, 2019, effective Nov 14, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of cracks within the ring gears of a slat geared rotary actuator (SGRA) resulting from a change in the raw material manufacturing process. This AD requires replacement of affected parts with serviceable parts, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-15 · published Oct 10, 2019, effective Nov 14, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318, A319, A320, and A321 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-17 · published Oct 10, 2019, effective Nov 14, 2019
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2000-03-20 R1, which applied to all Airbus SAS Model A300 B4-601, B4-603, and B4- 620, Model A300 B4-600R series, and Model A300 F4-605R airplanes. AD 2000-03-20 R1 required repetitive inspections to detect cracks on the forward fittings in the radius of a certain frame, adjacent to the tension bolts in the center section of the wings, and various follow-on actions. This AD retains the requirements of AD 2000-03-20 R1, adds new airplanes to the applicability, and introduces new compliance times for the required inspections, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by reports of cracking due to fatigue-related stress in the radius of frame 40, adjacent to the tension bolts at the center/ outer wing junction. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-20-07 · published Oct 11, 2019, effective Oct 11, 2019
The Boeing Company Airplanes
The FAA is adopting an airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD requires repetitive operational checks of the leading edge (LE) outboard (OB) slats and applicable on-condition actions. This AD also requires revising the airplane flight manual (AFM) to prohibit flap retraction under icing conditions and revising the existing maintenance or inspection program, as applicable, to incorporate a new operation check. This AD was prompted by a determination that the LE OB slat system could be out of position without flight deck annunciation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-20-01 · published Oct 17, 2019, effective Nov 21, 2019
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-26- 07, which applied to all Airbus SAS Model A350-941 and -1041 airplanes. AD 2018-26-07 required repetitive greasing of the thrust reverser actuators (TRAs), dispatch restrictions, and maintenance procedure revisions. This AD requires actions specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by the FAA's determination to add a requirement to replace the TRAs, which AD 2018-26-07 specified was not required at the time to provide the opportunity for the public to comment on the merits of that action. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-20-06 · published Oct 18, 2019, effective Nov 22, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A310 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-20-12 · published Oct 22, 2019, effective Nov 26, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-243, -243F, -341, -342, and -343 airplanes. This AD was prompted by a determination that cracks can develop on the ripple damper weld of the hydraulic pressure tube assembly and reports of failure of the ripple damper of the hydraulic pressure tube assembly. This AD requires replacement of the affected hydraulic pressure tube assembly or modification of both engines, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-20-13 · published Oct 22, 2019, effective Nov 26, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200, A330-200 Freighter, and A330-300 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-02 · published Oct 23, 2019, effective Nov 27, 2019
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400 and 747-400F series airplanes. This AD was prompted by an evaluation that determined fatigue cracks could develop in the underwing longerons. This AD requires repetitive inspections of the underwing longerons and certain fuselage skins for any crack, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-20-09 · published Oct 23, 2019, effective Nov 27, 2019
De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2011-18- 15, which applied to certain De Havilland Aircraft of Canada Limited Model DHC-8-400 series airplanes. AD 2011-18-15 required initial and repetitive torque checks of the bolt preload; detailed inspection of the barrel nuts and cradle for cracking, pitting, and corrosion if the bolt preload is correct; and replacement of certain hardware if necessary. This AD continues to require those actions. This AD also requires new inspections and replacement of certain hardware, which would terminate the repetitive torque checks and inspections; and removes airplanes from the applicability. This AD was prompted by in- service reports of cracked barrel nuts found at the front spar locations of the wing-to-fuselage attachment joints, and a loose washer in the barrel nut assembly. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-21-01 · published Oct 24, 2019, effective Nov 29, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-21-02 · published Oct 25, 2019, effective Nov 29, 2019
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200, -200F, and -300 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-20-11 · published Oct 31, 2019, effective Nov 15, 2019
ATR-GIE Avions de Transport Régional Airplanes
The FAA is adopting a new airworthiness directive (AD) for all ATR-GIE Avions de Transport R[eacute]gional Model ATR72 airplanes. This AD was prompted by reports of incorrectly installed main landing gear (MLG) bushings. This AD requires a one-time general visual inspection of the bushing installation on the left-hand and right-hand MLG, and replacement of incorrectly installed bushings, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-12 · published Oct 4, 2019, effective Nov 8, 2019
Sikorsky Aircraft Corporation Helicopters
The FAA is superseding Airworthiness Directive (AD) 2018-10-07 for Sikorsky Aircraft Corporation (Sikorsky) Model S-76C helicopters. AD 2018-10-07 required inspecting the engine collective position transducer (CPT). This new AD retains the requirements of AD 2018-10-07 and expands the applicability. This AD is prompted by the determination that an additional part-numbered engine CPT is affected by the same unsafe condition. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-19-13 · published Oct 21, 2019, effective Nov 5, 2019
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model EC225LP helicopters. This AD requires determining the total hours time-in-service (TIS) of the free wheel shafts of certain main rotor gearboxes (MGBs), replacing the MGB or right-hand side (RH) free wheel shaft, installing placard(s), and revising the Rotorcraft Flight Manual (RFM) for your helicopter. This AD was prompted by a report of wear of the ramps of the RH free wheel shaft. The actions of this AD are intended to address an unsafe condition on these products.
AD 2019-20-05 · published Oct 15, 2019, effective Oct 30, 2019
Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA is superseding airworthiness directive (AD) 2018-15-01 for certain Rolls-Royce plc (RR) Trent 1000-A, Trent 1000-C, Trent 1000-D, Trent 1000-E, Trent 1000-G, Trent 1000-H, Trent 1000-A2, Trent 1000-C2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2, and Trent 1000-L2 model turbofan engines. AD 2018-15-01 required certain engines susceptible to intermediate- pressure turbine (IPT) blade failure not be installed on an airplane together with other engines with IPT blades of the same cyclic life. This AD requires removal of the IPT blade set at lower cyclic life limits and replacing it with a blade set eligible for installation. This AD also expands the applicability to include additional Trent 1000 turbofan engine models. This AD was prompted by the determination that certain IPT blades are susceptible to shank corrosion which leads to cracking and possible blade separation. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-21-11 · published Oct 29, 2019, effective Oct 29, 2019
Pratt & Whitney Turbofan Engines
The FAA is superseding Airworthiness Directive (AD) 2019-19-11 for certain Pratt & Whitney (PW) PW1519G, PW1521G, PW1521GA, PW1524G, PW1525G, PW1521G-3, PW1524G-3, PW1525G-3, PW1919G, PW1921G, PW1922G, PW1923G, and PW1923G-A model turbofan engines. AD 2019-19-11 required initial and repetitive inspections of the low-pressure compressor (LPC) inlet guide vane (IGV) and the LPC rotor 1 (R1) and, depending on the results of the inspections, possible replacement of the LPC. This AD requires the same inspection of the LPC R1 for cracks or damage, removes the inspection of the LPC IGV for proper alignment, and expands the applicability to certain additional PW turbofan engines. This AD also reduces the compliance time for these inspections for certain PW turbofan engines. This AD was prompted by recent findings of cracks in the LPC R1 and an additional in-flight failure of the LPC R1. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2019-20-03 · published Oct 15, 2019, effective Nov 19, 2019
Various Transport Airplanes
The FAA is adopting a new airworthiness directive (AD) for various transport airplanes. This AD was prompted by reports of smoke and fumes in the flight deck. This AD requires modification of certain universal serial bus (USB) receptacles located in the flight deck. The FAA is issuing this AD to address the unsafe condition on these products.
