Airworthiness Directive · Amendment 39-19766 · Time limits/maintenance checks
Airbus SAS Airplanes
Superseded. A later AD replaced this one: AD 2022-19-02. Comply with the one in force.
This AD applies to the Airbus SAS airplanes specified in paragraphs (c)(1) through (3) of this AD, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness issued on or before October 15, 2018.
(1) Model A330-201, -202, -203, -223, and -243 airplanes.
(2) Model A330-223F and -243F airplanes.
(3) Model A330-301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes.
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200, A330-200 Freighter, and A330-300 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Within 90 days after the effective date of this AD, revise the existing maintenance or inspection program, as applicable, to incorporate the information specified in Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Revision 07, dated October 15, 2018. The component life limits and the initial compliance time for doing the tasks are at the times specified in Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Revision 07, dated October 15, 2018, or within 90 days after the effective date of this AD, whichever occurs later.
After the existing maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions and intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (j)(1) of this AD.
(1) Accomplishing the actions required by this AD terminates all requirements of AD 2019-01-05.
(2) Accomplishing the action required by task number 274400-00004-1-E of Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Revision 07, dated October 15, 2018, within the compliance time specified for that task in Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Revision 07, dated October 15, 2018, terminates all requirements of AD 2017-25-13 for Airbus SAS Model A330-200, -200 Freighter, and -300 series airplanes only.
(3) Accomplishing the action required by task number 213100-00001-1-E of Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Revision 07, dated October 15, 2018, within the compliance time specified for that task in Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Revision 07, dated October 15, 2018, terminates all requirements of AD 2014-16-22 for Airbus SAS Model A330-200, -200 Freighter, and -300 series airplanes only.
