24 Airworthiness Directives: 21 airplane, 1 rotorcraft, 2 engine.
AD 2016-13-08 · published Jul 5, 2016, effective Aug 9, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A300 series airplanes; and Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was prompted by a report of cracking of the lower tension bolt area at the rib one junction (both sides) of the lower wing. This AD requires repetitive inspections for cracking of the fasteners and of the fitting around the fastener holes at the frame (FR) 40 lower wing location, and corrective actions if necessary. We are issuing this AD to detect and correct crack initiation of the fittings of the FR40 lower wing locations, which could result in reduced structural integrity of the airplane.
AD 2016-13-10 · published Jul 5, 2016, effective Aug 9, 2016
The Boeing Company Airplanes
We are superseding Airworthiness Directive (AD) 2012-12-04, for certain The Boeing Company Model 737-300, -400, and -500 series airplanes. AD 2012-12-04 required repetitive external detailed inspections and nondestructive inspections to detect cracks in the fuselage skin along the chem-mill steps at stringers S-1 and S-2R, between station (STA) 400 and STA 460, and repair if necessary. This new AD requires a preventive modification of the fuselage skin at crown stringers S-1 and S-2R. This new AD also reduces the inspection threshold for certain airplanes. This AD was prompted by a determination that, for certain airplanes, the skin pockets adjacent to the Air Traffic Control (ATC) antenna are susceptible to widespread fatigue damage. We are issuing this AD to detect and correct fatigue cracking of the fuselage skin panels at the chem-mill steps, which could result in sudden fracture and failure of the fuselage skin panels, and consequent rapid decompression of the airplane.
AD 2016-13-11 · published Jul 5, 2016, effective Aug 9, 2016
The Boeing Company Airplanes
We are superseding Airworthiness Directive (AD) 2008-05-06 for certain The Boeing Company Model 737-100, -200, -300, -400, and -500 series airplanes. AD 2008-05-06 required repetitive inspections for fatigue cracking in the longitudinal floor beam web, upper chord, and lower chord located at certain body stations, and repair if necessary. This new AD requires, for certain airplanes, an inspection to determine if tapered fillers are installed, and related investigative and corrective actions if necessary. This AD was prompted by reports of cracks in the center wing box longitudinal floor beams, upper chord, and lower chord. We are issuing this AD to detect and correct fatigue cracking of the upper and lower chords and web of the longitudinal floor beams, which could result in rapid loss of cabin pressure.
AD 2016-13-14 · published Jul 5, 2016, effective Jul 20, 2016
Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD requires an inspection to determine if certain left and right main landing gear (MLG) retract actuator rod ends are installed and repetitive liquid penetrant inspections (LPIs) of affected left and right MLG retract actuator rod ends, and corrective actions if necessary. This AD also provides optional terminating action for the inspections. This AD was prompted by a report of cracked MLG retract actuator rod ends. We are issuing this AD to detect and correct fatigue cracking of the left and right MLG retract actuator rod ends, which could lead to left or right MLG collapse.
AD 2016-14-05 · published Jul 7, 2016, effective Aug 11, 2016
Textron Aviation Inc. Airplanes
We are superseding Airworthiness Directive (AD) 2008-15-06 for certain Textron Aviation Inc. Models 175 and 175A airplanes (type certificate previously held by Cessna Aircraft Company). AD 2008-15-06 required checking the airplane logbook to determine if the original engine mounting brackets had been replaced. If the original engine mounting brackets were still installed, the AD required repetitively inspecting those brackets for cracks and replacing any cracked engine mounting bracket until all four original engine mounting brackets were replaced. Replacing all four original engine mounting brackets terminated the actions required in AD 2008-15-06. Since we issued AD 2008-15-06, we have determined that the applicability needs to be changed to add one serial number and remove another. This new AD retains the actions required in AD 2008-15-06 and changes the Applicability section. We are issuing this AD to correct the unsafe condition on these products.
AD 2016-13-13 · published Jul 8, 2016, effective Aug 12, 2016
Beechcraft Corporation (Type Certificate Previously Held by Hawker Beechcraft Corporation; Raytheon Aircraft Company) Airplanes
We are adopting a new airworthiness directive (AD) for certain Beechcraft Corporation Model BAe.125 Series 1000A and 1000B airplanes and Model Hawker 1000 airplanes. This AD was prompted by reports of inadvertent stowage of the thrust reversers, which can result in high forward engine thrust even though the throttle is commanding reverse thrust. This AD requires installing kits that include relays, associated wiring, and a thrust reverser fail annunciator. We are issuing this AD to prevent inadvertent stowage of the thrust reversers, which could cause a runway overrun during a rejected takeoff or landing, and consequent structural failure and possible injury to occupants.
AD 2016-13-16 · published Jul 8, 2016, effective Aug 12, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by reports of a manufacturing oversight, in which a supplier omitted the required protective finish on certain bushings installed in the rear spar upper chord on horizontal stabilizers, which could lead to galvanic corrosion and consequent cracking of the rear spar upper chord. This AD requires an inspection or records check to determine if affected horizontal stabilizers are installed, related investigative actions, and for affected horizontal stabilizers, repetitive inspections for any crack of the horizontal stabilizer rear spar upper chord, and corrective action if necessary. We are issuing this AD to detect and correct cracking of the rear spar upper chord, which can result in the failure of the upper chord and consequent departure of the horizontal stabilizer from the airplane, which can lead to loss of control of the airplane.
AD 2016-14-02 · published Jul 8, 2016, effective Aug 12, 2016
Airbus Airplanes
We are superseding Airworthiness Directive (AD) 2012-18-12 for certain Airbus Model A318, A319, and A320 series airplanes. AD 2012-18- 12 required modifying the off-wing escape slide (OWS) enclosures on the left-hand (LH) side and right-hand (RH) side of the fuselage. This new AD retains the requirements of AD 2012-18-12 and expands the applicability to all Airbus Model A318, A319, and A320 series airplanes. This AD was prompted by reports that additional OWS part numbers have been affected. We are issuing this AD to prevent off-wing exits on the LH and RH sides of the fuselage from becoming inoperative. During an emergency, inoperative off-wing exits could impair the safe evacuation of occupants, possibly resulting in personal injuries.
AD 2016-14-03 · published Jul 8, 2016, effective Aug 12, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A319, A320, and A321 series airplanes. This AD is intended to complete certain mandated programs intended to support the airplane reaching its limit of validity (LOV) of the engineering data that support the established structural maintenance program. This AD requires reinforcing the forward pressure bulkhead at a certain stringer on both the left-hand and right-hand sides, and doing related investigative and corrective actions if necessary. We are issuing this AD to prevent fatigue cracking of the forward pressure bulkhead, which could result in reduced structural integrity of the airplane.
AD 2016-14-04 · published Jul 8, 2016, effective Aug 12, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This AD was prompted by reports of water leakage from the potable water system due to improperly installed waterline couplings, and water leaking into the electronics equipment (EE) bays from above the floor in the main cabin, resulting in water on the equipment in the EE bays. This AD requires replacing the potable waterline couplings above the forward and aft EE bays with new, improved couplings. This AD also requires sealing the main cabin floor areas above the aft EE bay, installing drip shields and foam blocks, and rerouting the wire bundles near the drip shields above the equipment in the aft EE bay. We are issuing this AD to prevent a water leak from an improperly installed potable water system coupling, or main cabin water source, which could cause the equipment in the EE bays to become wet, resulting in an electrical short and potential loss of system functions essential for safe flight.
AD 2016-14-06 · published Jul 8, 2016, effective Aug 12, 2016
Pacific Aerospace Limited Airplanes
We are superseding Airworthiness Directive (AD) 2006-13-05 for certain Pacific Aerospace Limited Model 750XL (type certificate previously held by Pacific Aerospace Corporation Ltd.) airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as some critical rivets on the wing not being fully age-hardened and being installed in specific locations where reduction in rivet strength reduces wing strength. We are issuing this AD to require actions to address the unsafe condition on these products.
AD 2016-13-09 · published Jul 12, 2016, effective Aug 16, 2016
Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B16 (CL-604 Variant) airplanes. This AD was prompted by a determination that certain maintenance tasks for the horizontal stabilizer trim actuator (HSTA) are inadequate. This AD requires revising the maintenance or inspection program, as applicable, to incorporate new airworthiness limitations for the HSTA. We are issuing this AD to detect and correct premature wear and cracking of the HSTA, which could result in failure of the HSTA and consequent loss of control of the airplane.
AD 2016-13-15 · published Jul 12, 2016, effective Aug 16, 2016
Dassault Aviation Airplanes
We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X airplanes. This AD was prompted by a report of improperly drilled bores, located on upper and lower stiffener joints to the Web at a certain frame. This AD requires a one- time inspection of the bores, and repair if necessary. We are issuing this AD to detect and correct an unsatisfactory bore that can adversely affect the structural integrity of the airplane.
AD 2016-14-07 · published Jul 12, 2016, effective Aug 16, 2016
Bombardier Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440), Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), Model CL-600- 2D15 (Regional Jet Series 705), Model CL-600-2D24 (Regional Jet Series 900), and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports of undesirable changes in the Reference Airspeed (RAS) Bug, occurring during flight without pilot input. This AD requires replacing the flight control computer (FCC). We are issuing this AD to prevent uncommanded pitch changes, which could result in deviation from a safe flight path.
AD 2016-14-08 · published Jul 12, 2016, effective Aug 16, 2016
Airbus Airplanes
We are superseding Airworthiness Directive (AD) 2015-10-03 for certain Airbus Model A330-200 and -300 series airplanes, and Model A340-200 and -300 series airplanes. AD 2015-10-03 required a detailed inspection for visible chrome of each affected main landing gear (MLG) sidestay upper cardan pin, associated nuts, and retainer assembly; pin replacement if needed; measurement of cardan pin clearance dimensions (gap check); corrective actions if necessary; and a report of all findings. This new AD requires a detailed inspection of the upper cardan pin and nut threads for any corrosion, pitting, or thread damage, and if necessary, replacement of the cardan pin and nut. This new AD also revises the applicability to include additional airplane models. This AD was prompted by a report that an MLG sidestay upper cardan pin migration event had been caused by corrosion due to lack of jointing compound and inadequate sealant application during the MLG installation. We are issuing this AD to detect and correct migration of the sidestay upper cardan pin, which could result in disconnection of the sidestay upper arm from the airplane structure, and could result in a landing gear collapse and consequent damage to the airplane and injury to occupants.
AD 2016-14-09 · published Jul 12, 2016, effective Aug 16, 2016
Airbus Airplanes
We are superseding Airworthiness Directive (AD) 2014-14-06 for all Airbus Model A318-111 and -112 airplanes; Model A319-111, -112, - 113, -114, and -115 airplanes; Model A320-111, -211, -212, and -214 airplanes; and Model A321-111, -112, -211, -212, and -213 airplanes. AD 2014-14-06 required inspecting the aft engine mount retainers for surface finish, cracks, and failure, and replacement if necessary. This new AD requires repetitive inspections for damaged, cracked, broken, and missing aft engine mount retainers, and replacement if necessary. This AD was prompted by inspection results that have shown that the main cause of crack initiation in the aft engine mount retainers is the vibration dynamic effect that affects both retainers, either with "dull" or "bright" surface finishes. We are issuing this AD to detect and correct failure of retainer brackets of the aft engine mount and consequent loss of the locking feature of the nuts of the inner and outer pins; loss of the pins will result in the aft mount engine link no longer being secured to the aft engine mount.
AD 2016-15-01 · published Jul 22, 2016, effective Aug 26, 2016
Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A300 series airplanes; Model A300 B4-600, B4-600R, F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This AD was prompted by reports of partial loss of no-back brake (NBB) efficiency on the trimmable horizontal stabilizer actuator (THSA). This AD requires an inspection to determine THSA part numbers, serial numbers, and flight cycles on certain THSAs; and repetitive replacement of certain THSAs. We are issuing this AD to prevent loss of THSA NBB efficiency, which, in conjunction with the inability of the power gear to keep the ball screw in its last commanded position, could lead to an uncommanded movement of the horizontal stabilizer, possibly resulting in loss of control of the airplane.
AD 2016-15-02 · published Jul 22, 2016, effective Aug 26, 2016
M7 Aerospace LLC Airplanes
We are adopting a new airworthiness directive (AD) for all M7 Aerospace LLC Models SA26-AT, SA26-T, SA226-AT, SA226-T, SA226-T(B), SA226-TC, SA227-AC (C-26A), SA227-AT, SA227-BC (C-26A), SA227-CC, SA227-DC (C-26B), and SA227-TT airplanes. This AD was prompted by reports of multiple cracks in the steel horizontal tube of the cockpit control column. This AD requires inspection of the cockpit control column horizontal tube for cracks and repair or replacement of the cockpit control column as necessary. We are issuing this AD to correct the unsafe condition on these products.
AD 2016-15-03 · published Jul 27, 2016, effective Aug 31, 2016
Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of operator inability to open the main passenger door following severe hot soak conditions. This AD requires the incorporation of a new configuration to the passenger door external handle detent to enhance the performance across the full range of the airplane operating temperatures. We are issuing this AD to prevent thermal expansion and permanent deformation at severe hot soak conditions, creating high friction between the spring pot housing and the slider that could result in inability to open the main passenger door and impede evacuation in the event of an emergency.
AD 2016-15-04 · published Jul 29, 2016, effective Sep 2, 2016
The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 757-200 and -200CB series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the lap splices at stringer S-14R, lower fastener row, are subject to widespread fatigue damage (WFD). This AD requires external dual frequency eddy current (DFEC) or internal high frequency eddy current (HFEC) inspections of the lap splice, inner skin fasteners, at stringer S-14R, station (STA) 440 through STA 540, and corrective action if necessary. We are issuing this AD to detect and correct cracking of the fuselage skin lap splice. Such cracking could result in reduced structural integrity of the airplane.
AD 2016-15-07 · published Jul 29, 2016, effective Sep 2, 2016
Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), Model CL-600-2D15 (Regional Jet Series 705), Model CL-600-2D24 (Regional Jet Series 900), and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports of corrosion found on the slat and flap torque tubes in the slat and flap control system. This AD requires replacement of the slat and flap torque tubes in the slat and flap control system. We are issuing this AD to prevent rupture of a corroded slat or flap torque tube. This condition could result in an inoperative slat or flap system and consequent reduced controllability of the airplane.
AD 2016-12-51 · published Jul 5, 2016, effective Jul 20, 2016
Airbus Helicopters
We are publishing a new airworthiness directive (AD) for Airbus Helicopters Model AS332L2 and Model EC225LP helicopters, which was sent previously to all known U.S. owners and operators of these helicopters. This AD immediately prohibits flight of all Model AS332L2 and EC225LP helicopters. This AD is prompted by an accident involving an EC225LP helicopter in which the main rotor hub (MRH) detached from the main gearbox (MGB). These actions are intended to prevent failure of the main rotor system and subsequent loss of control of the helicopter.
AD 2016-13-12 · published Jul 1, 2016, effective Aug 5, 2016
Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-710A1-10, -710A2-20, and -710C4-11 turbofan engines. This AD requires removing the pawl carrier pivot pins, part number (P/N) BRR17117, from service and replacing them with parts eligible for installation. This AD was prompted by a seized low-pressure turbine (LPT) fuel shut-off pawl carrier caused by corrosion of the pawl carrier pivot pin. We are issuing this AD to prevent failure of the fuel shut-off mechanism, which could result in uncontained part release, damage to the engine, and damage to the airplane.
AD 2016-14-10 · published Jul 25, 2016, effective Aug 9, 2016
CFM International, S.A. Turbofan Engines Modified by Supplemental Type Certificate SE00034EN
We are superseding airworthiness directive (AD) 2013-02-02 for certain CFM International, S.A. CFM56-3, CFM56-3B, and CFM56-3C turbofan engines. AD 2013-02-02 required removal from service of certain high-pressure turbine (HPT) disks manufactured by Global Material Solutions of Pratt & Whitney, at reduced maximum life limits. This AD corrects the serial numbers (S/Ns) listed in AD 2013-02-02. This AD was prompted by reports that certain HPT disk S/Ns in AD 2013- 02-02 and in certain Pratt & Whitney service information are incorrect. We are issuing this AD to prevent uncontained release of multiple turbine blades, damage to the engine, and damage to the airplane.
