34 Airworthiness Directives: 27 airplane, 2 rotorcraft, 4 engine, 1 glider.
AD 2011-09-10 · published May 2, 2011, effective Jun 6, 2011
Airbus Model A300 B4-601, B4-603, B4-605R, C4-605R Variant F, and F4-605R Airplanes, and A310-204 and -304 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-09-11 · published May 2, 2011, effective Jun 6, 2011
The Boeing Company Model 777-200 and -300 Series Airplanes Equipped With Pratt and Whitney Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires repetitive inspections for hydraulic fluid contamination of the interior of the strut disconnect assembly; repetitive inspections for discrepancies of the interior of the strut disconnect assembly, if necessary; repetitive inspections of the exterior of the strut disconnect assembly for cracks, if necessary; and corrective action if necessary. This AD also provides an optional terminating action for the inspections. This AD was prompted by reports of system disconnect boxes that have been contaminated with hydraulic fluid and, in one incident, led to subsequent cracking of titanium parts in the system disconnect assembly. We are issuing this AD to detect and correct hydraulic fluid contamination, which can cause cracking of titanium parts in the system disconnect assembly, resulting in compromise of the engine firewall. A cracked firewall can allow fire in the engine area to enter the strut and can lead to an uncontained engine strut fire if flammable fluid is present. Cracking of the disconnect box may also reduce the effectiveness of the fire extinguishing system in the engine compartment and could contribute to an uncontained engine fire. In addition, a cracked disconnect box can leak flammable fluids into the engine core, which can initiate an engine fire, and lead to one or both fire conditions discussed above.
AD 2011-09-12 · published May 2, 2011, effective Jun 6, 2011
Bombardier, Inc. Model DHC-8-101, -102, -103, -106, -201, -202, -301, -311, -315, -401, and -402 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-09-13 · published May 2, 2011, effective May 17, 2011
Airbus Model A340-200 and -300 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-09-14 · published May 2, 2011, effective Jun 6, 2011
The Boeing Company Model 747-200B, -300, -400, -400D, and -400F Series Airplanes Powered by Pratt and Whitney 4000 or General Electric CF6-80C2 Series Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires an inspection to determine the part number of the mid-pivot access door and to determine if the correct door is installed, and the installation of a marker on the mid- pivot access door, and if necessary, repetitive ultrasonic inspections for cracking of the mid-pivot bolt assembly and eventual replacement of the mid-pivot bolt assembly. This AD was prompted by a report that the left and right access doors of the spring beam mid-pivot bolt assembly for the No. 1 strut were inadvertently installed in the incorrect position during strut modification. We are issuing this AD to detect and correct incorrectly installed mid-pivot bolt assemblies on the spring beam on the outboard struts. Incorrectly installed bolt assemblies could lead to fatigue cracking and consequent fracturing of the mid-pivot bolt assembly, which could lead to loss of the spring beam load path and the possible separation of a strut and engine from the airplane during flight.
AD 2011-09-15 · published May 2, 2011, effective Jun 6, 2011
The Boeing Company Model 777-200, -200LR, -300, and -300ER Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires, for certain airplanes, replacing certain boost pump relays with ground fault interrupter (GFI) relays. For certain other airplanes, this AD requires installing new panels in the main equipment center, making certain wiring changes, installing new GFI relays in the new panels, and installing new electrical load management system (ELMS) software. For certain other airplanes, this AD requires doing certain bond resistance measurements, and corrective actions if necessary. This AD was prompted by fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent potential ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
AD 2011-09-17 · published May 2, 2011, effective May 17, 2011
Airbus Model A340-200, -300, -500, and -600 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that supersedes an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * * The revision 01 of Airbus A340 ALS [Airworthiness Limitations section] Part 3 introduces more restrictive maintenance requirements and/or airworthiness limitations. Failure to comply with this revision constitutes an unsafe condition. * * * * * The unsafe condition is a safety-significant latent failure that would, in combination with one or more other specific failures or events, result in a hazardous or catastrophic failure condition. This AD requires actions that are intended to address the unsafe condition described in the MCAI.
AD 2011-09-18 · published May 2, 2011, effective Jun 6, 2011
Dassault-Aviation Model FALCON 7X Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-01 · published May 5, 2011, effective Jun 9, 2011
Dassault-Aviation Model FALCON 7X Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-02 · published May 11, 2011, effective Jun 15, 2011
The Boeing Company Model 747-400, 747-400D, and 747-400F Series Airplanes Equipped With General Electric CF6-80C2 or Pratt & Whitney PW4000 Series Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires modifying certain thrust reverser control system wiring to the flap control unit (FCU). This AD was prompted by a report of automatic retraction of the leading edge flaps due to indications transmitted to the FCU from the thrust reverser control system during takeoff. We are issuing this AD to prevent automatic retraction of the leading edge flaps during takeoff, which could result in reduced climb performance and consequent collision with terrain and obstacles or forced landing of the airplane.
AD 2011-10-03 · published May 11, 2011, effective Jun 15, 2011
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 Airplanes; and Model ERJ 190-100 STD, ERJ 190-100 LR, ERJ 190-100 IGW, ERJ 190-200 STD, ERJ 190-200 LR, and ERJ 190-200 IGW Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-05 · published May 11, 2011, effective Jun 15, 2011
Airbus Model A310-203, -204, -222, -304, -322, and -324 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-06 · published May 11, 2011, effective Jun 15, 2011
Airbus Model A310 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-07 · published May 11, 2011, effective Jun 15, 2011
Airbus Model A310 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCA I) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-08 · published May 11, 2011, effective Jun 15, 2011
Airbus Model A310 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that would supersede two existing ADs. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-10 · published May 11, 2011, effective Jun 15, 2011
Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-09 · published May 13, 2011, effective Jun 17, 2011
Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 206, 207, 210, T303, 336, and 337 Airplanes
We are superseding an existing airworthiness directive (AD) for Cessna Aircraft Company (Cessna) 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 206, 207, 210, T303, 336, and 337 series airplanes. That AD currently requires repetitive inspections and replacement of parts, if necessary, of the seat rail and seat rail holes; seat pin engagement; seat rollers, washers, and axle bolts or bushings; wall thickness of roller housing and the tang; and lock pin springs. This new AD requires retaining all of the actions from the previous AD and adding steps to the inspection procedures in the previous AD. This AD was prompted by added steps to the inspection procedures, added revised figures, and clarification of some of the existing steps. We are issuing this AD to prevent seat slippage or the seat roller housing from departing the seat rail, which may consequently cause the pilot/copilot to be unable to reach all the controls. This failure could lead to the pilot/copilot losing control of the airplane.
AD 2011-10-13 · published May 13, 2011, effective Jun 17, 2011
Diamond Aircraft Industries GmbH Models DA 42, DA 42 NG, and DA 42 M-NG Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-14 · published May 13, 2011, effective Jun 17, 2011
DASSAULT AVIATION Model MYSTERE-FALCON 50 Airplanes
We are superseding an existing airworthiness directive (AD) that applies to the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-15 · published May 13, 2011, effective May 31, 2011
Airbus Model A318-112, A319-111, A319-112, A319-115, A319-132, A319-133, A320-214, A320-232, A320-233, A321-211, A321-213, and A321-231 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-16 · published May 13, 2011, effective May 31, 2011
PIAGGIO AERO INDUSTRIES S.p.A Model P-180 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that will supersede an existing AD. This emergency AD was sent previously to all known U.S. owners and operators of PIAGGIO AERO INDUSTRIES S.p.A (Piaggio) Model PIAGGIO P-180 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-17 · published May 13, 2011, effective Jun 17, 2011
Airbus Model A300 and A310 Series Airplanes, and Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
We are superseding three existing airworthiness directives (ADs) that apply to the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-08-51 · published May 18, 2011, effective Jun 2, 2011
The Boeing Company Model 737-300, -400, and -500 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This emergency AD was sent previously to all known U.S. owners and operators of these airplanes. This AD requires repetitive external eddy current inspections of the lap joints at stringers S-4R and S-4L, along the entire length from body station (BS) 360 to BS 908. If a crack indication is found, the AD requires either confirming the crack by doing internal eddy current inspections, or repairing the crack. As an alternative to the external eddy current inspections, the AD provides for internal eddy current and detailed inspections for cracks in the lower skin at the lower row of fasteners at stringers S-4L and S-4R. This AD was prompted by a report indicating that a Model 737-300 series airplane experienced a rapid decompression when the lap joint at stringer S-4L between BS 664 and BS 727 cracked and opened up due to cracking in the lower skin at the lower row of fasteners. We are issuing this AD to detect and correct such cracking, which could result in an uncontrolled decompression of the airplane.
AD 2011-09-04 · published May 18, 2011, effective Jun 22, 2011
Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires repetitive inspections for any damage of the lower surface of the center wing box, and corrective actions if necessary. This AD was prompted by reports of fatigue cracks of the lower surface of the center wing box. We are issuing this AD to detect and correct such cracks, which could result in the structural failure of the wings.
AD 2011-11-01 · published May 18, 2011, effective Jun 22, 2011
British Aerospace Regional Aircraft Model HP.137 Jetstream Mk.1, Jetstream Series 200, Jetstream Series 3101, and Jetstream Model 3201 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-11-02 · published May 18, 2011, effective Jun 22, 2011
Bombardier, Inc. Model DHC-8-400 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an airworthiness authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 90-09-06 · published May 29, 2011, effective May 29, 2011
The Boeing Company Airplanes
AD 2011-10-11 · published May 16, 2011, effective May 31, 2011
Agusta S.p.A. Model AB412 Helicopters
We are adopting a new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model AB412 helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by the aviation authority of Italy to identify and correct an unsafe condition related to the rescue hoist hook installed on this model helicopter. The aviation authority of Italy, with which we have a bilateral agreement, states in the MCAI that a missing lock pin may cause the loss of the hoist hook and any load. The absence of the lock pin constitutes an unsafe condition, and this AD is intended to detect the presence of an identification plate marked "BT 412-124," which indicates that the hook assembly has the lock pin installed to prevent the loss of a rescue hoist hook and its load.
AD 2011-10-12 · published May 18, 2011, effective Jun 22, 2011
Eurocopter France Model AS350B, B1, B2, B3, BA, and EC130 B4 Helicopters
We are adopting a new airworthiness directive (AD) for the specified Eurocopter France (ECF) helicopters. This AD results from a mandatory continuing airworthiness information (MCAI) AD issued by the aviation authority of the European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community. The superseding MCAI AD states that several engine flameouts have involved failure of the 41-tooth pinion in the engine accessory gearbox. Each affected helicopter had a starter-generator manufactured by one company. Investigation revealed the torque damping system of the starter-generator was inoperative due to incorrect adjustment that caused bending stresses on the 41-tooth pinion. Failure of the pinion causes the engine fuel pump to stop operating, resulting in an engine flameout. The EASA AD requires a new adjustment procedure to optimize the performance of the specified starter-generator damping assembly. This AD is intended to prevent failure of a pinion and a fuel pump, engine flameout, and subsequent loss of control of the helicopter.
AD 2011-08-07 · published May 3, 2011, effective Jun 7, 2011
Rolls-Royce plc (RR) RB211-Trent 875-17, RB211-Trent 877-17, RB211-Trent 884-17, RB211-Trent 884B-17, RB211-Trent 892-17, RB211-Trent 892B-17, and RB211-Trent 895-17 Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-09-07 · published May 3, 2011, effective Jun 7, 2011
Rolls-Royce plc (RR) RB211-524 Series and RB211 Trent 500, 700, and 800 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-10-04 · published May 3, 2011, effective Jun 7, 2011
Rolls-Royce plc RB211-Trent 800 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-11-08 · published May 26, 2011, effective Jun 30, 2011
Rolls-Royce plc (RR) RB211-535 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2011-09-19 · published May 11, 2011, effective Jun 15, 2011
BURKHART GROB LUFT-UND Model G 103 C Twin III SL Gliders
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
