Airworthiness Directive · Amendment 39-16691 · Electrical power
Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
This AD applies to all Airbus Model A300 B4-601, B4-603, B4-620, B4-622, B4-605R, B4-622R, F4-605R, F4-622R, and C4-605R Variant F airplanes, certificated in any category, all certified models, all serial numbers, except airplanes on which Airbus Mandatory Service Bulletin A300-24-6102 (Airbus Modification 13381) has been embodied.
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Within 30 months after the effective date of this AD, install Teflon bushes in the hydraulic reservoir panel at the lower left-hand side in accordance with the Accomplishment Instructions of Airbus Mandatory Service Bulletin A300-24-6102, Revision 01, dated September 24, 2010.
Actions done before the effective date of this AD in accordance with Airbus Mandatory Service Bulletin A300-24-6102, dated August 13, 2009, are acceptable for compliance with the corresponding requirements of this AD.
Note 1: This AD differs from the MCAI and/or service information as follows: No differences.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
