42 Airworthiness Directives: 26 airplane, 4 rotorcraft, 8 engine, 1 propeller, 2 glider, 1 various.
AD 2009-15-16 R1 · published Aug 5, 2010, effective Aug 5, 2010
McDonnell Douglas Corporation Model DC-9-10 Series Airplanes, DC-9-30 Series Airplanes, DC-9-81 (MD-81) Airplanes, DC-9-82 (MD-82) Airplanes, DC-9-83 (MD-83) Airplanes, DC-9-87 (MD-87) Airplanes, MD-88 Airplanes, and MD-90-30 Airplanes, Equipped With Flight Deck Doors Installed in Accordance With Supplemental Type Certificate ST02463AT
The FAA is revising an existing airworthiness directive (AD), which applies to all McDonnell Douglas Model DC-9-10 series airplanes, DC-9-30 series airplanes, DC-9-81 (MD-81) airplanes, DC-9-82 (MD-82) airplanes, DC-9-83 (MD-83) airplanes, DC-9-87 (MD-87) airplanes, MD-88 airplanes, and MD-90-30 airplanes. That AD currently requires modifying the flight deck door. This AD revises the applicability by removing certain airplanes. This AD was prompted by a report indicating that certain equipment of the flight deck door is defective. We are issuing this AD to prevent failure of this equipment, which could jeopardize flight safety.
AD 2010-16-01 · published Aug 5, 2010, effective Sep 9, 2010
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135ER, -135KE, -135KL, and -135LR Airplanes, and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an airworthiness authority of another country to identify and correct an unsafe condition on an aviation product. The earlier MCAI, Brazilian Airworthiness Directive 2007-08-02, effective September 27, 2007, describes the unsafe condition as:
AD 2010-16-02 · published Aug 5, 2010, effective Sep 9, 2010
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 Airplanes; and Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-16-03 · published Aug 5, 2010, effective Sep 9, 2010
McDonnell Douglas Corporation Model MD-11 and MD-11F Airplanes Equipped With General Electric CF6-80C2 Series Engines
We are adopting a new airworthiness directive (AD) for certain Model MD-11 and MD-11F airplanes. This AD requires revising the airplane flight manual to advise the flightcrew to use certain procedures during descent in certain icing conditions. This AD results from reports of several in-flight engine flameouts, including multiple dual engine flameout events, in ice-crystal icing conditions. We are issuing this AD to ensure that the flightcrew has the proper procedures to follow in certain icing conditions. These certain icing conditions could cause a multiple engine flameout during flight with the potential inability to restart the engines, and consequent forced landing of the airplane.
AD 2010-16-04 · published Aug 5, 2010, effective Sep 9, 2010
The Boeing Company Model 767-200, -300, and -300F Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 767-200, -300, and -300F series airplanes. This AD requires inspecting to verify the part number of the low-pressure flex-hoses of the flightcrew and supernumerary oxygen system installed under the oxygen mask stowage box at flightcrew and supernumerary oxygen mask locations, and replacing the flex-hose with a new non-conductive low- pressure flex-hose if necessary. This AD results from reports of low- pressure flex-hoses of the flightcrew oxygen system that burned through due to inadvertent electrical current from a short circuit in an adjacent audio select panel. We are issuing this AD to prevent inadvertent electrical current, which can cause the low-pressure flex- hoses used in the flightcrew and supernumerary oxygen systems to melt or burn, resulting in oxygen system leakage and smoke or fire.
AD 2010-16-05 · published Aug 5, 2010, effective Sep 9, 2010
The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 747 airplanes. This AD requires inspecting to verify the part number of the low-pressure flex-hoses of the crew oxygen system installed under the oxygen mask stowage boxes in the flight deck, and replacing the flex-hose with a new non-conductive low-pressure flex- hose if necessary. This AD results from reports of low-pressure flex- hoses of the crew oxygen system that burned through due to inadvertent electrical current from a short circuit in the audio select panel. We are issuing this AD to prevent inadvertent electrical current, which can cause the low-pressure flex-hoses of the crew oxygen system to melt or burn, causing oxygen system leakage and smoke or fire.
AD 2010-16-06 · published Aug 5, 2010, effective Sep 9, 2010
The Boeing Company Model 737-300, -400, -500, -600, -700, and -800 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 737-300, -400, -500, -600, -700, and -800 series airplanes. This AD requires inspecting to verify the part number of the low-pressure flex-hoses of the crew oxygen system installed under the oxygen mask stowage boxes located within the flight deck, and replacing the flex- hose with a new non-conductive low-pressure flex-hose if necessary. This AD results from reports of low-pressure flex-hoses of the crew oxygen system that burned through due to inadvertent electrical current from a short circuit in the audio select panel. We are issuing this AD to prevent inadvertent electrical current, which can cause the low- pressure flex-hoses of the crew oxygen system to melt or burn, causing oxygen system leakage and smoke or fire.
AD 2010-16-09 · published Aug 13, 2010, effective Sep 17, 2010
BAE Systems (Operations) Limited Model BAe 146-100A and -200A Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-16-10 · published Aug 13, 2010, effective Sep 17, 2010
BAE Systems (Operations) Limited Model Avro 146-RJ and BAe 146 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-16-12 · published Aug 13, 2010, effective Aug 30, 2010
The Boeing Company Model 777-200LR and -300ER Series Airplanes Equipped with GE90-100 Series Engines
We are adopting a new airworthiness directive (AD) for certain Model 777-200LR and -300ER series airplanes equipped with GE90-100 series engines. This AD requires replacing the insulation blanket fasteners of the lower aft cowl of the thrust reverser. This AD also requires inspecting the oil scavenge tube on the turbine rear frame of the engine for damage, and replacement if necessary. This AD results from a determination of insufficient clearance and subsequent interference between the oil scavenge tube on the turbine rear frame of the engine and the bolt on the aft cowl insulation blanket of the thrust reverser. We are issuing this AD to prevent damage and possible puncture of the oil scavenge tube and consequent oil loss, which could result in an in-flight shutdown of the engine.
AD 2010-16-13 · published Aug 13, 2010, effective Sep 17, 2010
Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F airplanes (Collectively Called A300-600 series airplanes); and A310 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-16-11 · published Aug 18, 2010, effective Sep 22, 2010
McDonnell Douglas Corporation Model MD-90-30 Airplanes
We are adopting a new airworthiness directive (AD) for certain Model MD-90-30 airplanes. This AD requires inspecting for corrosion of the retract cylinder support fitting for the main landing gear (MLG) and the mating bore for the support fitting in the MLG trunnion fitting, performing corrective actions if necessary, and replacing cadmium-plated retract cylinder support bushings and bearings. This AD results from reports of the retract cylinder support fitting for the MLG failing during gear extension and subsequently damaging the hydraulic system. We are issuing this AD to prevent corrosion and damage that could compromise the integrity of the retract cylinder support fitting for the MLG, which could adversely affect the airplane's safe landing.
AD 2010-17-02 · published Aug 18, 2010, effective Sep 22, 2010
Airbus Model A330-201, -202, -203, -223, -243, -301, -302, -303, -321, -322, -323, -341, -342, and -343 Airplanes, Model A340-211, -212, -213, -311, -312, and -313 Airplanes, and Model A340-541 and -642 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-03 · published Aug 18, 2010, effective Sep 2, 2010
The Boeing Company Model 767-300 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 767-300 series airplanes. This AD requires replacing a wire bundle clamp and installing a tetrafluoroethylene (TFE 2X) sleeve. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent chafing of a wiring bundle, which could result in a high-energy short and, consequently, a possible ignition source in the center auxiliary fuel tank.
AD 2010-17-04 · published Aug 18, 2010, effective Sep 2, 2010
Airbus Model A380-800 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-05 · published Aug 18, 2010, effective Sep 22, 2010
The Boeing Company Model 737-600, -700, -700C, -800, and -900 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 737-600, -700, -700C, -800, and -900 series airplanes. This AD requires replacement of the power control relays in the P91 and P92 power distribution panels for the fuel boost and override pumps with new, improved relays having a ground fault interrupter (GFI) feature, or installation and maintenance of universal fault interrupters (UFIs) using a certain supplemental type certificate. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent pump housing burn-through due to electrical arcing, which could create a potential ignition source inside a fuel tank. This condition, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
AD 2010-17-07 · published Aug 18, 2010, effective Sep 22, 2010
Airbus Model A330-223, -321, -322, and -323 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-09 · published Aug 18, 2010, effective Sep 22, 2010
Pilatus Aircraft Ltd. Model PC-12/47E Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-18-03 · published Aug 24, 2010, effective Sep 8, 2010
Dassault-Aviation Model FALCON 7X Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-15 · published Aug 25, 2010, effective Sep 29, 2010
Hawker Beechcraft Corporation (Type Certificate No. A00010WI Previously Held by Raytheon Aircraft Company) Model 390 Airplanes
We are adopting a new airworthiness directive (AD) for certain Hawker Beechcraft Corporation Model 390 airplanes. This AD requires you to inspect for installation of certain serial number (S/N) starter generators and replace the starter generator if one with an affected serial number is found. This AD results from reports that starter generators with deficient armature insulating materials may have been installed on certain airplanes. We are issuing this AD to detect and replace starter generators with defective armature insulating materials. This condition could result in the loss of operation of one or both starter generators with consequent loss of all non battery electrical power.
AD 2010-17-17 · published Aug 25, 2010, effective Sep 29, 2010
Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-18 · published Aug 25, 2010, effective Sep 9, 2010
Air Tractor, Inc. Models AT-802 and AT-802A Airplanes
We are adopting a new airworthiness directive (AD) to supersede AD 2010-13-08, which applies to all Air Tractor, Inc. (Air Tractor) Models AT-802 and AT-802A airplanes. AD 2010-13-08 currently requires you to repetitively inspect (using the eddy current method) the two outboard fastener holes in both of the wing main spar lower caps at the center splice joint for cracks and repair or replace any cracked spar cap. Since we issued 2010-13-08, we evaluated service information issued by Air Tractor and determined we need to add inspections, add modifications, and change the safe life for certain serial number (SN) ranges. Consequently, this AD would retain the actions of AD 2010-13-08 and would add inspections, add modifications, and change the safe life for certain SN ranges. We are issuing this AD to detect and correct cracks in the wing main spar lower cap at the center splice joint, which could result in failure of the spar cap and lead to wing separation and loss of control of the airplane.
AD 2010-17-19 · published Aug 25, 2010, effective Sep 9, 2010
The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER Series Airplanes
The FAA is superseding an existing airworthiness directive (AD) that applies to all Model 737-600, -700, -700C, -800, -900, and - 900ER series airplanes. The existing AD currently requires, for certain airplanes, a one-time detailed inspection of the inboard and outboard aft attach lugs of the left and right elevator tab control mechanisms for discrepancies, and replacement of any discrepant elevator tab control mechanism. For certain other airplanes, the existing AD requires that the inspections be done repetitively. Replacing the elevator tab control mechanism with a new Boeing-built mechanism terminates the repetitive inspections in the existing AD. This new AD requires that modified repetitive inspections be done on all airplanes, regardless of accomplishment of the terminating action specified in the existing AD. This AD results from reports of failure of the aft attach lugs on the elevator tab control mechanisms, which resulted in severe elevator vibration. This AD also results from reports of gaps in elevator tab control mechanisms and analysis that additional elevator tab control mechanisms might have bearings that will come loose. We are issuing this AD to detect and correct discrepancies in the aft attach lugs of the elevator tab control mechanism, which could result in elevator and tab vibration. Consequent structural failure of the elevator or horizontal stabilizer could result in loss of structural integrity and aircraft control.
AD 2010-18-04 · published Aug 25, 2010, effective Sep 29, 2010
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 Airplanes; and Model ERJ 190-100 LR, -100 IGW, -100 STD, -200 STD, -200 LR, and -200 IGW Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-18-06 · published Aug 25, 2010, effective Aug 30, 2010
GA 8 Airvan (Pty) Ltd Models GA8 and GA8-TC320 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that will supersede an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-18-07 · published Aug 25, 2010, effective Sep 9, 2010
Airbus Model A318, A319, A320, and A321 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-15-03 · published Aug 5, 2010, effective Aug 20, 2010
Eurocopter France Model EC 130 B4 Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Eurocopter France helicopters. This action requires inspecting certain electrical harnesses for damage and if damage is found, repairing the electrical harness; protecting the electrical harness from damage; installing harness clamp blocks; and inspecting each fairing attachment screw to determine the length and replacing attachment screws, if they exceed a certain length. This amendment is prompted by a report of an in-flight incident that led to the inflation of the emergency floatation gear (emergency floats) and the activation of various warnings. The actions specified in this AD are intended to prevent interference between an electrical harness and the lower structure fairing attachment screws. Damage to an electrical harness by a lower structure fairing attachment screw could lead to short- circuiting of various warnings, inflation of the emergency floats during flight, and subsequent loss of control of the helicopter.
AD 2010-16-08 · published Aug 5, 2010, effective Aug 20, 2010
Schweizer Aircraft Corporation (Schweizer) Model 269D Helicopters
This amendment adopts a new airworthiness directive (AD) for the Schweizer Model 269D helicopters. This action requires installing a Scroll Housing Blade Containment Shielding Kit on each helicopter. This amendment is prompted by 21 reports of the blades of the oil cooler impeller separating, one of which punctured the engine and transmission oil cooler resulting in loss of engine oil pressure. The actions specified in this AD are intended to protect the oil cooler from uncontained oil cooler impeller blades that could damage the oil cooler and result in loss of engine and transmission oil pressure, and subsequent loss of control of the helicopter.
AD 2010-11-51 · published Aug 18, 2010, effective Sep 2, 2010
Eurocopter France (Eurocopter) Model AS350B, BA, B1, B2, C, D, and D1 Helicopters and Model AS355E, F, F1, F2, and N Helicopters
This document publishes in the Federal Register an amendment adopting Airworthiness Directive (AD) 2010-11-51, which was sent previously to all known U.S. owners and operators of the specified Eurocopter model helicopters by individual letters. This AD requires visually inspecting the tail gearbox (TGB) control lever for a crack. If a crack is found, this AD also requires replacing the cracked TGB control lever with an airworthy TGB control lever. Optional terminating actions for the inspection requirements of this AD can be done by either replacing a TGB control lever with an airworthy TGB control lever that is marked with an "X" near the part number or stripping the rework area and dye-penetrant inspecting that area for a crack, and if no crack is found, reworking and marking the TGB control lever. If a crack is found, removing and replacing the cracked TGB control lever with an airworthy TGB control lever is required. This AD is prompted by several reports of cracking in a TGB control lever. The actions specified by this AD are intended to prevent failure of the TGB control lever, loss of tail rotor control, and subsequent loss of control of the helicopter.
AD 2010-15-51 · published Aug 18, 2010, effective Sep 2, 2010
Agusta S.p.A. Model A119 and AW119 MKII Helicopters
This document publishes in the Federal Register an amendment adopting Airworthiness Directive (AD) 2010-15-51, which was sent previously to all known U.S. owners and operators of Agusta S.p.A. (Agusta) Model A119 and AW119 MKII helicopters by individual letters. This AD requires, within 5 hours time-in-service (TIS), and thereafter at intervals not to exceed 50 hours TIS, removing the cover of each pilot and co-pilot control box assembly (control box) and inspecting each rotary variable differential transformer (RVDT) control gear locking pin (locking pin) for proper position. If a locking pin is recessed, extended, or missing, this AD requires replacing the control box before further flight. This amendment is prompted by a report that an RVDT locking pin that was installed on a Model AW119 MKII helicopter moved from its proper position, resulting in loss of connectivity of the pilot and co-pilot throttle controls. The actions specified by this AD are intended to prevent the RVDT locking pin from moving from its proper position, which could lead to loss of manual engine throttle control, and subsequent loss of control of the helicopter.
AD 2010-16-07 · published Aug 13, 2010, effective Sep 17, 2010
Rolls-Royce plc (RR) RB211-Trent 900 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-13 · published Aug 18, 2010, effective Sep 22, 2010
Rolls-Royce plc RB211-524C2 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-01 · published Aug 23, 2010, effective Sep 27, 2010
Pratt & Whitney Canada Corp. PW617F-E Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-06 · published Aug 23, 2010, effective Sep 27, 2010
Pratt & Whitney Canada Corp. (P&WC) PW615F-A Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-10 · published Aug 23, 2010, effective Sep 27, 2010
Rolls-Royce plc (RR) RB211-22B and RB211-524 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-12 · published Aug 23, 2010, effective Sep 27, 2010
Rolls-Royce Deutschland Ltd. & Co. KG. (RRD) Models Tay 650-15 and Tay 651-54 Turbofan Engines
The FAA is superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-18-02 · published Aug 25, 2010, effective Sep 9, 2010
Thielert Aircraft Engines GmbH (TAE) Models TAE 125-01 and TAE 125-02-99 Reciprocating Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-18-09 · published Aug 26, 2010, effective Sep 10, 2010
Pratt & Whitney Canada (P&WC) PW530A, PW545A, and PW545B Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-11 · published Aug 23, 2010, effective Sep 27, 2010
Dowty Propellers R408/6-123-F/17 Model Propellers
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-15-06 · published Aug 5, 2010, effective Sep 9, 2010
GROB-WERKE GMBH & CO KG Models G102 ASTIR CS and G102 STANDARD ASTIR III Gliders
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-18-05 · published Aug 25, 2010, effective Aug 30, 2010
Aircraft Industries a.s. (Type Certificate G24EU Previously Held by LETECKÉ ZÁVODY a.s. and LET Aeronautical Works) Model L-13 Blanik Gliders
We are adopting a new airworthiness directive (AD) for the products listed above that will supersede an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2010-17-08 · published Aug 18, 2010, effective Sep 22, 2010
Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
