27 Airworthiness Directives: 22 airplane, 5 engine.
AD 2009-14-03 · published Jul 8, 2009, effective Aug 12, 2009
Bombardier Model CL-600-1A11 (CL-600), CL-600-2A12 (CL-601), CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-14-04 · published Jul 8, 2009, effective Aug 12, 2009
Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. For certain airplanes, this AD requires deactivating or modifying the wiring to the outboard landing lights, until the wire bundles and electrical connectors have been replaced. For all airplanes, this AD also requires inspecting for any broken, damaged, or missing fairleads, grommets, and wires in the four electrical junction boxes of the main wheel well, and corrective actions if necessary. For certain airplanes, this AD also requires replacing certain wire bundles for the landing lights and fuel shutoff valves, and related investigative, other specified, and corrective actions if necessary. For certain airplanes, this AD also requires replacing of certain electrical connectors and backshell clamps. This AD results from reports of uncommanded engine shutdowns and burned and damaged wire bundles associated with the outboard landing lights and engine fuel shutoff valves. This AD also results from reports of damaged and missing grommets and broken and damaged fairleads in the electrical junction boxes of the main wheel well. We are issuing this AD to prevent a hot short between the outboard landing light and fuel shutoff valve circuits, which could result in an uncommanded engine shutdown. We are also issuing this AD to prevent corrosion of the electrical connectors of the wing rear spars, which could result in short circuits and consequent incorrect functioning of airplane systems needed for safe flight and landing.
AD 2009-14-06 · published Jul 8, 2009, effective Aug 12, 2009
Boeing Model 777 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all Boeing Model 777 airplanes. That AD currently requires, for the drive mechanism of the horizontal stabilizer, repetitive detailed inspections for discrepancies, repetitive lubrication of the ballnut and ballscrew, repetitive measurements of the freeplay between the ballnut and the ballscrew, and corrective action if necessary. This new AD revises the compliance times of the existing AD. This AD results from a report of extensive corrosion of a ballscrew in the drive mechanism of the horizontal stabilizer on a Boeing Model 757 airplane, which is similar in design to the ballscrew on Model 777 airplanes. We are issuing this AD to prevent an undetected failure of the primary load path for the ballscrew in the drive mechanism of the horizontal stabilizer and subsequent wear and failure of the secondary load path, which could lead to loss of control of the horizontal stabilizer and consequent loss of control of the airplane.
AD 2009-14-07 · published Jul 8, 2009, effective Aug 12, 2009
Dassault Model Mystere-Falcon 20-C5, 20-D5, 20-E5, and 20-F5 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-14-09 · published Jul 8, 2009, effective Aug 12, 2009
Dassault Model Falcon 2000EX Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-14-10 · published Jul 8, 2009, effective Aug 12, 2009
EADS-PZL “Warszawa-Okęcie” S.A. Model PZL-104 WILGA 80 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-14-13 · published Jul 15, 2009, effective Aug 19, 2009
Pilatus Aircraft Ltd. Models PC-12, PC-12/45, PC-12/47, and PC-12/47E Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI (two different MCAI) describes the unsafe condition as:
AD 2009-15-01 · published Jul 15, 2009, effective Jul 27, 2009
Hawker Beechcraft Corporation (Type Certificate Previously Held by Raytheon Aircraft Company) Model G36 Airplanes
We are adopting a new airworthiness directive (AD) for certain Hawker Beechcraft Corporation (Type Certificate previously held by Raytheon Aircraft Company) Model G36 airplanes. This AD requires you to inspect for any improper installation and/or chafing of the P60/J60 electrical connector, associated wiring, and fuel line and, if found, correct the installation and replace damaged parts. This AD results from reports of chafing between the wire harness/connector(s) and fuel line. We are issuing this AD to detect and correct chafing between the wire harness/connector(s) and fuel line. This chafing could lead to fuel leaking into the cockpit and fire in the cockpit if wiring arcs through the fuel line.
AD 2009-15-02 · published Jul 15, 2009, effective Aug 19, 2009
Airbus Model A318, A319, A320, and A321 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-15-03 · published Jul 15, 2009, effective Aug 19, 2009
Bombardier Model BD-700-1A10 and BD-700-1A11 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-15-04 · published Jul 15, 2009, effective Aug 19, 2009
Airbus Model A330-200 and -300, and A340-200 and -300 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-15-05 · published Jul 15, 2009, effective Jul 27, 2009
Cessna Aircraft Company Models 208 and 208B Airplanes
We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Models 208 and 208B airplanes. This AD requires you to measure the roll and the yaw bridle cable tension (adjusting as necessary) and to torque the clamp screws. This AD results from two reported incidences of slack bridle cables with the swaged balls unseating from their drum recesses. We are issuing this AD to detect and correct loose bridle cable clamps, which could result in the swaged ball unseating from the recess in the servo drum and contacting the cable guard pin. This failure could lead to very limited control of the rudder and/or aileron with consequent loss of control.
AD 2009-11-12 · published Jul 21, 2009, effective Aug 25, 2009
Airbus Model A310 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Airbus Model A310 series airplanes. That AD currently requires repetitive inspections of the fuselage skin to detect corrosion or fatigue cracking around and under the chafing plates of the wing root; repetitive inspections for fatigue cracking of frame 39, stringer 35; and corrective actions if necessary. The existing AD also provides for an optional terminating action for certain repetitive inspections, except for certain areas where corrosion was detected and reworked. This new AD reduces the intervals for accomplishing repetitive inspections in a certain area. This AD results from mandatory continuing airworthiness information originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. We are issuing this AD to detect and correct fatigue cracks and corrosion around and under the chafing plates of the wing root, which could result in reduced structural integrity of the airplane.
AD 2009-15-06 · published Jul 21, 2009, effective Aug 25, 2009
Boeing Model 707 Airplanes and Model 720 and 720B Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 707 airplanes and Model 720 and 720B series airplanes. This AD requires performing an operational test of the engine fuel suction feed of the fuel system, and other related testing and corrective actions if necessary. This AD results from a report of in- service occurrences of loss of fuel system suction feed capability, followed by total loss of pressure of the fuel feed system. We are issuing this AD to detect and correct failure of the engine fuel suction feed capability of the fuel system, which could result in multi-engine flameout, inability to restart the engines, and consequent forced landing of the airplane.
AD 2009-15-07 · published Jul 21, 2009, effective Aug 25, 2009
Airbus Model A319, A320, and A321 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-15-08 · published Jul 21, 2009, effective Aug 25, 2009
BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-15-09 · published Jul 21, 2009, effective Aug 5, 2009
Airbus Model A380-841, -842, and -861 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-15-10 · published Jul 21, 2009, effective Aug 5, 2009
Airbus Model A330-301, -321, -322, -341, and -342 Series Airplanes, and Airbus Model A340-211, -212, -213, -311, -312, and -313 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-15-11 · published Jul 21, 2009, effective Aug 5, 2009
Aerospatiale Model SN-601 (Corvette) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-15-12 · published Jul 21, 2009, effective Aug 25, 2009
Boeing Model 747-400 and -400D Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 747-400 and -400D series airplanes. This AD requires installing new relays to allow the flightcrew to turn off electrical power to the in-flight entertainment (IFE) system and other non- essential passenger cabin systems through the left and right utility bus switches, and other specified actions. This AD results from an IFE systems review. We are issuing this AD to ensure that the flightcrew is able to turn off electrical power to the IFE system and other non- essential passenger cabin systems through utility bus switches in the flight compartment, in the event of smoke or fumes. The flightcrew's inability to turn off electrical power to the IFE system and other non- essential passenger cabin systems could result in the inability to control smoke or fumes in the airplane flight deck or passenger cabin during a non-normal or emergency situation.
AD 2009-15-17 · published Jul 29, 2009, effective Sep 2, 2009
Airbus Model A330-200, A330-300, A340-200, and A340-300 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * * [B]ogie beam internal paint has been degraded, leading to a loss of cadmium plating and thus allowing development of corrosion pitting. If not corrected, this situation under higher speed could result in the aircraft departing the runway or in the bogie [beam] detaching from the aircraft or [main landing] gear collapses, which would constitute an unsafe condition. * * * * * We are issuing this AD to require actions to correct the unsafe condition on these products.
AD 2009-15-18 · published Jul 29, 2009, effective Sep 2, 2009
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER, -120FC, -120QC, and -120RT Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-14-08 · published Jul 1, 2009, effective Aug 5, 2009
General Electric Company (GE) CF6-80C2B5F Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for GE CF6-80C2B5F turbofan engines. This AD requires removing certain part number (P/N) high-pressure compressor rotor (HPCR) stages 11-14 spool/ shafts before they exceed a new, reduced life limit. This AD results from an internal GE audit that compared the life limited parts certification documentation to the airworthiness limitations section (ALS) of the instructions for continuing airworthiness (ICA). We are issuing this AD to prevent HPCR stages 11-14 spool/shaft fatigue cracks caused by exceeding the life limit, which could result in a possible uncontained failure of the HPCR spool/shaft and damage to the airplane.
AD 2009-14-05 · published Jul 8, 2009, effective Jul 23, 2009
Pratt & Whitney Models PW2037, PW2037(M), and PW2040 Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for Pratt & Whitney models PW2037, PW2037(M), and PW2040 turbofan engines. This AD requires 12th stage disks of certain high-pressure compressor (HPC) drum rotor disk assemblies, to be inspected for cracks by Pratt & Whitney using a special eddy current inspection procedure. This AD results from six HPC 12th stage disks found cracked during HPC module disassembly at overhaul. We are issuing this AD to prevent uncontained failure of the HPC 12th stage disk and airplane damage.
AD 2009-14-12 · published Jul 9, 2009, effective Aug 13, 2009
Pratt & Whitney Canada Corp. (P&WC) Models PW305A and PW305B Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-14-11 · published Jul 15, 2009, effective Aug 19, 2009
Turbomeca S.A. ARRIUS 2F Turboshaft Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-15-13 · published Jul 21, 2009, effective Aug 25, 2009
Honeywell International Inc., T5313 and T5317 Series Turboshaft Engines
The FAA is adopting a new airworthiness directive (AD) for Honeywell International Inc., T5313 and T5317 series turboshaft engines. This AD requires initial and repetitive visual inspections and initial and repetitive ultrasonic inspections of combustion chamber housings (CCHs) for cracks. This AD results from eight instances of cracks in CCHs. Two of the instances resulted in an engine shutdown during flight. We are issuing this AD to detect cracks in the CCH, which could result in rupture of the CCH, leading to loss of engine power and damage to the helicopter.
