26 Airworthiness Directives: 15 airplane, 4 rotorcraft, 6 engine, 1 various.
AD 2009-07-09 · published Apr 6, 2009, effective May 11, 2009
DORNIER Luftfahrt GmbH Models Dornier 228-100, Dornier 228-101, Dornier 228-200, Dornier 228-201, Dornier 228-202, and Dornier 228-212 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-07-14 · published Apr 6, 2009, effective May 11, 2009
Diamond Aircraft Industries GmbH Model DA 40 and DA 40F Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2008-26-03 · published Apr 7, 2009, effective Apr 13, 2009
Bombardier Model DHC-8-102, DHC-8-103, DHC-8-106, DHC-8-201, DHC-8-202, DHC-8-301, DHC-8-311, and DHC-8-315 Airplanes Equipped With a Cockpit Door Electronic Strike System Installed in Accordance With Supplemental Type Certificate (STC) ST02014NY
This document publishes in the Federal Register an amendment adopting airworthiness directive (AD) 2008-26-03. This AD requires modifying the electronic strike system of the cockpit door. This AD results from a report indicating that the equipment is defective. We are issuing this AD to prevent failure of this equipment, which could compromise flight safety.
AD 2009-08-02 · published Apr 8, 2009, effective May 13, 2009
McDonnell Douglas Model DC-8-50 Series Airplanes; Model DC-8F-54 and DC-8F-55 Airplanes; Model DC-8-60 Series Airplanes; Model DC-8-60F Series Airplanes; Model DC-8-70 Series Airplanes; and Model DC-8-70F Series Airplanes
We are adopting a new airworthiness directive (AD) for all McDonnell Douglas airplanes identified above. This AD requires revising the airplane flight manual to provide the flightcrew with procedures to preclude dry running of the fuel pumps. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent pump inlet friction (i.e., overheating or sparking) when the fuel pumps are continually run as the center wing fuel tank becomes empty, and/or electrical arc burnthrough, which could result in a fuel tank fire or explosion.
AD 2009-07-11 · published Apr 9, 2009, effective May 14, 2009
Boeing Model 737-300, -400, and -500 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all Boeing Model 737-300, -400, and -500 series airplanes. That AD currently requires repetitive inspections for discrepancies of the fuselage skin under the dorsal fin assembly, and repairing if necessary. This new AD requires an inspection for any chafing or crack in the fuselage skin and abrasion resistant coating at the dorsal fin landing, an inspection for damage to the dorsal fin seals, attach clip, and seal retainer, and other specified and corrective actions as necessary. The new requirements will end the need for the existing repetitive inspections. This AD results from a report of an 18-inch crack found in the fuselage skin area under the blade seals of the nose cap of the dorsal fin due to previous wear damage, and additional reports of fuselage skin wear. We are issuing this AD to prevent discrepancies of the fuselage skin, which could result in fatigue cracking due to cabin pressurization and consequent rapid in- flight decompression of the airplane fuselage.
AD 2009-08-04 · published Apr 9, 2009, effective May 14, 2009
Hawker Beechcraft Corporation Model BH.125 Series 600A Airplanes and Model HS.125 Series 700A Airplanes Modified in Accordance With Supplemental Type Certificate (STC) SA2271SW
We are adopting a new airworthiness directive (AD) for certain Hawker Beechcraft Corporation Model BH.125 series 600A airplanes and Model HS.125 series 700A airplanes. This AD requires inspecting the wiring diagrams containing the cockpit blowers and comparing with the current airplane configuration, and reworking the wiring if necessary. This AD results from a report indicating that a blower motor of the cockpit ventilation and avionics cooling system seized up and gave off smoke. We are issuing this AD to prevent smoke and fumes in the cockpit in the event that a blower motor seizes and overheats due to excessive current draw.
AD 2009-08-05 · published Apr 9, 2009, effective Apr 20, 2009
Liberty Aerospace Incorporated Model XL-2 Airplanes
We are adopting a new airworthiness directive (AD) for certain Liberty Aerospace Incorporated Model XL-2 airplanes. This AD requires you to repetitively inspect the exhaust muffler for cracks and to replace the exhaust muffler when cracks are found. This AD is the result of reports that cracks have been found in the exhaust muffler during maintenance and service inspections. We are issuing this AD to detect and correct cracks in the exhaust muffler, which could result in carbon monoxide entering the cabin through the heating system. Carbon monoxide entering into the airplane cabin could lead to incapacitation of the pilot.
AD 2009-08-09 · published Apr 15, 2009, effective May 20, 2009
EADS SOCATA Model TBM 700 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-08-10 · published Apr 15, 2009, effective Apr 20, 2009
Pilatus Aircraft Ltd. Model PC-12/47E Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that will supersede an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-08-11 · published Apr 21, 2009, effective May 26, 2009
PILATUS AIRCRAFT LTD. Models PC-12 and PC-12/45 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-09-01 · published Apr 21, 2009, effective May 6, 2009
Airbus Model A318, A319, A320 and A321 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-09-02 · published Apr 21, 2009, effective May 6, 2009
Bombardier Model DHC-8-400 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-09-04 · published Apr 27, 2009, effective May 18, 2009
EADS-PZL “Warszawa-Okęcie” S.A. Model PZL-104 WILGA 80 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-09-05 · published Apr 30, 2009, effective Jun 4, 2009
Airbus Model A318-100 and A319-100 Series Airplanes; A320-111 Airplanes; A320-200 Series Airplanes; and A321-100 and A321-200 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Airbus Model A318-100 and A319-100 series airplanes; A320-111 airplanes; A320-200 series airplanes; and A321-100 and A321-200 series airplanes. That AD currently requires a one-time inspection of the horizontal hinge pin of the 103VU electrical panel in the avionics compartment to determine if the hinge pin can move out of the hinge, and related investigative and corrective actions if necessary. This new AD instead requires installing a hinge pin stopper on the internal door of the 103VU electrical panel. This AD results from a report indicating that electrical wire damage was found in the 103VU electrical panel due to contact between the hinge pin and the adjacent electrical wire harness. We are issuing this AD to prevent contact between the horizontal hinge pin and the adjacent electrical wire harness, which could result in damage to electrical wires, and consequent arcing and/or failure of associated systems.
AD 2009-09-09 · published Apr 30, 2009, effective May 11, 2009
Cessna Aircraft Company (Type Certificate Previously Held by Columbia Aircraft Manufacturing (Previously The Lancair Company)) Models LC40-550FG, LC41-550FG, and LC42-550FG Airplanes
We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Type Certificate previously held by Columbia Aircraft Manufacturing (previously The Lancair Company)) Models LC40- 550FG, LC41-550FG, and LC42-550FG airplanes. This AD requires you to repetitively inspect the rudder hinges and the rudder hinge brackets for damage, i.e., cracking, deformation, and discoloration. If damage is found during any inspection, this AD also requires you to replace the damaged rudder hinge and/or rudder hinge bracket. This AD results from reports that cracked lower rudder hinge brackets were found on two of the affected airplanes. We are issuing this AD to detect and correct damage in the rudder hinges and the rudder hinge brackets, which could result in failure of the rudder. This failure could lead to loss of control.
AD 2009-07-13 · published Apr 9, 2009, effective May 14, 2009
MD Helicopters, Inc. Model MD900 (including the MD902 Configuration) Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified MD Helicopters, Inc. (MDHI) model helicopters that requires, within 30 days, reducing the current gross weight limit to a maximum gross weight limit of 5,400 pounds and inserting a copy of this AD into the Limitations section of the Rotorcraft Flight Manual (RFM) or making certain optional modifications that constitute terminating actions. This amendment is prompted by flight tests that show that the information currently listed in the Limitations section of the RFM is inconsistent with the actual performance of the helicopter. The actions specified by this AD are intended to prevent loss of directional control of the helicopter.
AD 2009-08-03 · published Apr 9, 2009, effective Apr 24, 2009
Bell Helicopter Textron Canada Limited Model 206A, 206B, 206L, 206L-1, 206L-3, 206L-4, 222, 222B, 222U, 230, 407, 427, and 430 Helicopters
We are adopting a superseding airworthiness directive (AD) for the specified Bell Helicopter Textron Canada Limited (BHTC) Model 206A, 206B, 206L, 206L-1, 206L-3, 206L-4, 222, 222B, 222U, 230, 407, 427, and 430 helicopters. That AD currently requires replacing each affected tail rotor blade (blade) with an airworthy blade that has a serial number not listed in the Rotor Blades, Inc. (RBI) document that is attached to each of the Bell Helicopter Textron Alert Service Bulletins (ASBs) listed in the applicability section of the AD. That AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of Canada. The MCAI states that there have been three reports of blade tip weights departing from the blade during flight. Since issuing that AD, BHTC has issued revised service information to correct part numbers and serial numbers listed in the RBI document that is attached to each BHTC ASB and to add additional part-numbered and serial-numbered blades to the list. The actions of this AD are intended to prevent loss of a blade tip weight, loss of a blade, and subsequent loss of control of the helicopter.
AD 2009-07-52 · published Apr 16, 2009, effective May 1, 2009
Bell Helicopter Textron Canada Limited Model 206A Series, 206B Series, 206L Series, 407, and 427 Helicopters
This document publishes in the Federal Register an amendment adopting Airworthiness Directive (AD) 2009-07-52 and supersedes Emergency AD 2009-07-51, issued March 17, 2009, which was sent previously to all known U.S. owners and operators of Bell Helicopter Textron Canada Limited (Bell) Model 206A series, 206B series, 206L series, 407, and 427 helicopters by individual letters. This AD requires, before further flight, inspecting each cyclic control lever assembly (lever assembly) that has less than 50 hours time-in-service (TIS) to determine if it is correctly installed and properly staked in the lever assembly. This amendment is prompted by a Transport Canada AD report of a bearing incorrectly installed in the copilot lever assembly. The actions specified by this AD are intended to prevent failure of a bearing, failure of the lever assembly, and subsequent loss of control of the helicopter.
AD 2009-07-53 · published Apr 27, 2009, effective Apr 27, 2009
Sikorsky Aircraft Corporation Model S-92A Helicopters
This document publishes in the Federal Register an amendment adopting Airworthiness Directive (AD) 2009-07-53, which was sent previously to all known U.S. owners and operators of Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters by individual letters. This amendment is prompted by the failure of 2 main gearbox filter bowl assembly studs (studs) that were found broken during a fatal accident investigation in Canada. Prior to the accident, the manufacturer was investigating a July 2008 incident that also involved broken studs. In both cases, the broken studs resulted in rapid loss of oil. The failures have been tied to fretting and galling of the original titanium studs; therefore, this AD requires removing all titanium studs and replacing them with steel studs. The actions specified by this AD are intended to prevent failure of a stud, which could result in rapid loss of oil, failure of the main gearbox, and subsequent loss of control of the helicopter.
AD 2009-07-10 · published Apr 1, 2009, effective May 6, 2009
General Electric Company CF6-80A Series Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CF6-80A series turbofan engines with a high-pressure turbine rotor (HPTR) stage 1 disk, part number (P/N) 9367M45G06, installed. This AD requires removing any HPTR stage 1 disk, P/N 9367M45G06, before exceeding 2,075 cycles-since-new (CSN). This AD results from an error by GE that incorrectly cited a cyclic life of 12,600 CSN for the HPTR stage 1 disk, P/N 9367M45G06. We are issuing this AD to prevent the HPTR stage 1 disk from exceeding its part life, which could cause fatigue cracks to start and grow. These cracks could result in a possible uncontained disk failure and damage to the airplane.
AD 2009-07-12 · published Apr 2, 2009, effective May 7, 2009
General Electric Company CF34-1A, -3A, -3A1, -3A2, -3B, and -3B1 Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CF34-1A, -3A, -3A1, -3A2, -3B, and -3B1 turbofan engines with high-pressure (HP) rotor 4-step air balance piston stationary seals (4-step seals), part numbers (P/Ns) 4923T54G01, 6019T90G03, 6037T99G01, 6037T99G02, and 6037T99G03, installed. This AD requires removing the 4-step seals and incorporating an 8-step seal at the next piece-part exposure. This AD results from the investigation of an airplane accident. Both engines experienced high-altitude flameout. Rotation of the HP rotors was not maintained during descent and the engines could not be restarted. We are issuing this AD to prevent the inability to restart both engines after flameout due to excessive friction of the 4-step seal, which could result in subsequent forced landing of the airplane.
AD 2009-08-06 · published Apr 13, 2009, effective May 18, 2009
General Electric Company (GE) CF6-80A Series Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for GE CF6-80A series turbofan engines with certain stage 1 high-pressure turbine (HPT) rotor disks, installed. This AD requires removal from service of those stage 1 HPT rotor disks within 30 days after the effective date of the AD. This AD results from the FAA learning that those disks are susceptible to cracks developing at the aft chamfer of the blade dovetail slots. We are issuing this AD to prevent cracks developing at the aft chamfer of the blade dovetail slots that could propagate to a failure of the disk and cause an uncontained engine failure and damage to the airplane.
AD 2009-08-07 · published Apr 13, 2009, effective May 18, 2009
Honeywell International Inc. ALF502L-2 and ALF502L-2C Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for Honeywell International Inc. ALF502L-2 and ALF502L-2C turbofan engines with certain high-pressure compressor (HPC) first stage discs installed. This AD requires performing a dimensional inspection to determine if excessive disc balance material was removed and a magnetic particle inspection if the disc passes the dimensional inspection. This AD results from reports of discs found with excessive material removed from the balancing locations of the disc. We are issuing this AD to prevent the discs from fracturing before reaching the currently published life limit. A disc fracture could result in an uncontained failure of the disc and damage to the airplane.
AD 2009-08-08 · published Apr 14, 2009, effective Apr 29, 2009
Turbomeca Arriel 1B, 1D, 1D1, 2B, and 2B1 Turboshaft Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-09-03 · published Apr 27, 2009, effective Jun 1, 2009
Turbomeca S.A. Arriel 2B and 2B1 Turboshaft Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2009-08-01 · published Apr 9, 2009, effective May 14, 2009
Honeywell Flight Management Systems (FMSs) Equipped With Honeywell NZ-2000 Navigation Computers and Honeywell IC-800 or IC-800E Integrated Avionics Computers; as Installed on Various Transport Category Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all Honeywell FMSs served by Honeywell NZ-2000 navigation computers and IC-800 integrated avionics computers. That AD currently requires identifying affected computers by part number and software modification level and revising the Limitations section of applicable airplane flight manuals to provide procedures for retaining optimum position determination and intended navigation. This new AD requires upgrading new software, which terminates the existing requirements. This AD results from reports of in-flight unannunciated shifts of computed position in airplanes with the subject FMS computers. We are issuing this AD to prevent a shift in the FMS computed position, which could result in uncommanded deviations from the intended flight path of the airplane, and, if those deviations are undetected by the flight crew, compromised terrain/traffic avoidance.
