50 Airworthiness Directives: 40 airplane, 2 rotorcraft, 7 engine, 1 glider.
AD 2006-26-09 · published Jan 4, 2007, effective Feb 8, 2007
Boeing Model 737-200, -300, -400, and -500 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 737-200, -300, -400, and -500 series airplanes. This AD requires a one-time inspection of the frames between station 360 and station 907 to determine if a subject support bracket for the air conditioning outlet extrusion is installed, and related repetitive investigative actions and repair if necessary. This AD also provides an optional preventive modification that ends the repetitive investigative actions. This AD also requires a one-time post-modification/repair inspection for cracking of each repaired/modified frame. This AD results from numerous reports indicating that frame cracks have been found at the attachment holes for support brackets for the air conditioning outlet extrusion. We are issuing this AD to detect and correct such cracking, which, if the cracking were to continue to grow, could result in a severed frame. A severed frame, combined with existing multi-site damage at the stringer 10 lap splice, could result in rapid decompression of the airplane.
AD 2006-26-11 · published Jan 4, 2007, effective Feb 8, 2007
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 and ERJ 190 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain EMBRAER Model ERJ 170 and ERJ 190 airplanes. This AD requires repetitive inspections to detect damaged smoke seals in the aft avionics compartment, repair/replacement if any damage is found, and reinforcement if no damage is found. This AD also requires eventual replacement of all smoke seals in the aft avionics compartment with new, improved seals having new part numbers, which terminates the repetitive inspections. This AD results from a report of damaged smoke seals in the aft avionics compartment of the affected airplanes. We are issuing this AD to prevent smoke from penetrating into the passenger cabin during a fire in the avionics compartment.
AD 2006-26-12 · published Jan 4, 2007, effective Feb 8, 2007
Airbus Model A330, A340-200, and A340-300 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all Airbus Model A330, A340-200, and A340-300 series airplanes. That AD currently requires repetitive inspections of a certain bracket that attaches the flight deck instrument panel to the airplane structure; replacement of the bracket with a new, improved bracket; and related investigative and corrective actions if necessary. This new AD requires replacement of the existing bracket with a titanium-reinforced bracket, which ends the repetitive inspections in the existing AD. This AD also requires related investigative and corrective actions while accomplishing the replacement, and reduces the applicability in the existing AD. This AD results from a report of cracking damage found on certain brackets that were replaced per the requirements in the existing AD. We are issuing this AD to prevent a cracked bracket. Failure of this bracket, combined with failure of the horizontal beam, could result in collapse of the left part of the flight deck instrument panel, and consequent reduced controllability of the airplane.
AD 2006-26-13 · published Jan 8, 2007, effective Feb 12, 2007
Boeing Model 707-100 Long Body, -100B Long Body, -100B Short Body, -E3F, -300, -300B, and -300C Series Airplanes; Model 727-100 and -200 Series Airplanes; Model 737-200, -200C, -300, -400, and -500 Series Airplanes; Model 747-100B, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747SR, and 747SP Series Airplanes; Model 757-200 and 757-200PF Series Airplanes; and
The FAA is superseding two existing airworthiness directives (AD), which apply to certain Boeing airplanes as specified above. Those ADs currently require inspection of the attachment of the shoulder restraint harness to the mounting bracket on certain observer and attendant seats to determine if a C-clip is used in the attachment, and corrective action if necessary. This new AD removes certain airplanes from the applicability of one existing AD and adds other airplanes. We also determined that this new AD refers to identical revisions of certain service information cited by another existing AD. This AD results from the determination that some airplanes had been inadvertently included in or excluded from the applicability of one existing AD and that certain additional new airplanes are now subject to the identified unsafe condition. We are issuing this AD to prevent detachment of the shoulder restraint harness of the attendant or observer seat from its mounting bracket during service, which could result in injury to the occupant of the seat.
AD 2007-01-01 · published Jan 9, 2007, effective Feb 13, 2007
BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ Airplanes
The FAA is adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ airplanes. This AD requires determining the part number of the lift spoiler actuators/jacks (referred to after this as "lift spoiler jacks"). For affected lift spoiler jacks, this AD requires determining the date of manufacture of the lift spoiler jacks, repetitively inspecting the eye-end assembly of the lift spoiler jacks to detect discrepancies of the assembly or associated parts, and performing corrective actions if necessary. This AD results from a report that a lift spoiler deployed in flight due to corrosion at the thread where the eye-end assembly was screwed into the piston of the lift spoiler jack. We are issuing this AD to prevent detachment of the eye-end assembly of a lift spoiler jack, which could result in uncommanded deployment of a lift spoiler in flight, and consequent reduced controllability of the airplane.
AD 2006-20-14 · published Jan 10, 2007, effective Jan 16, 2007
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 and ERJ 190 Airplanes
This document publishes in the Federal Register an amendment adopting airworthiness directive (AD) 2006-20-14 that was sent previously to all known U.S. owners and operators of certain EMBRAER Model ERJ 170 and ERJ 190 airplanes by individual notices. This AD requires modification of certain flight deck door electronic equipment. This AD is prompted by a report indicating that this equipment is defective. We are issuing this AD to prevent failure of this equipment, which could jeopardize flight safety.
AD 2007-01-02 · published Jan 10, 2007, effective Feb 14, 2007
McDonnell Douglas Model MD-11 and -11F Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain McDonnell Douglas Model MD-11 and -11F airplanes. That AD currently requires an initial general visual inspection of the power feeder cables of the integrated drive generator (IDG) and the fuel feed lines of engine pylons No. 1 and No. 3 on the wings for proper clearance and damage; corrective actions if necessary; and repetitive general visual inspections and a terminating action for the repetitive inspections. This new AD requires the existing actions, and for certain airplanes, this AD requires installation of new clamps on the power feeder cables of the IDG of engine pylons No. 1 and No. 3. This AD results from reports of IDG power feeder cables riding against structure and fuel lines in the No. 1 and No. 3 pylons. We are issuing this AD to prevent potential chafing of the power feeder cables of the IDG in engine pylons No. 1 and No. 3 on the wings, and consequent arcing on the fuel lines in the engine pylons and possible fuel fire.
AD 2007-01-07 · published Jan 12, 2007, effective Feb 16, 2007
Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
The FAA is superseding an existing airworthiness directive (AD), that applies to certain Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. That AD currently requires repetitive inspections for cracks, sealant damage, and corrosion of the main fittings of the main landing gear (MLG), and corrective actions if necessary. This new AD reduces the compliance times for inspecting certain low-utilization airplanes, and provides a terminating action for the repetitive inspections. This AD results from a report of a cracked main fitting of the MLG. We are issuing this AD to detect and correct fatigue cracking of the main fitting of the MLG and consequent failure of the main fitting, which could result in the collapse of the MLG.
AD 2006-26-10 · published Jan 17, 2007, effective Feb 21, 2007
Airbus Model A300 B2 and B4 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A300 B2 and B4 series airplanes. This AD requires revising the airplane flight manual (AFM) to include procedures for resetting the trim and pitch trim levers after each landing, determining which servomotor moves the pitch trim control wheel, and doing applicable other specified actions. This AD also provides for optional terminating actions for those requirements. This AD results from a report of a sudden nose-up movement after disengagement of the autopilot in cruise. We are issuing this AD to ensure that the flightcrew is aware of the procedures for resetting the trim and pitch trim levers after each landing and to prevent failure of the servomotors of the pitch trim systems during flight. Failure of the servomotors of the pitch trim systems could result in uncommanded nose- up movement of the control surface of the pitch trim systems after disengagement of the autopilot in cruise.
AD 2007-02-01 · published Jan 18, 2007, effective Feb 2, 2007
Dassault Model F2000EX Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as incorrect monitoring of the fire detection system; therefore, its integrity is not guaranteed at all times. This AD requires actions that are intended to address the unsafe condition described in the MCAI.
AD 2007-02-04 · published Jan 22, 2007, effective Feb 26, 2007
SOCATA-Groupe Aerospatiale TB 20 and TB 21 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as reports of interference between the wing spar lower boom and the wheel fairing attaching screw. We are issuing this AD to require actions to correct the unsafe condition on these products.
AD 2007-02-08 · published Jan 22, 2007, effective Feb 26, 2007
EADS SOCATA TBM 700 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a report of a master cylinder yoke failure. We are issuing this AD to require actions to correct the unsafe condition on these products.
AD 2007-02-09 · published Jan 22, 2007, effective Feb 6, 2007
Airbus Model A310 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracking in the wing main landing gear (MLG) rib 5 forward attachment lug, which could affect the structural integrity of the MLG attachment. This AD requires actions that are intended to address the unsafe condition described in the MCAI.
AD 2007-02-02 · published Jan 24, 2007, effective Feb 28, 2007
McDonnell Douglas Model DC-8-55, DC-8F-54, and DC-8F-55 Airplanes; and Model DC-8-60, DC-8-70, DC-8-60F, and DC-8-70F Series Airplanes
This amendment adopts a new airworthiness directive (AD), applicable to certain McDonnell Douglas Model DC-8 airplanes. This AD requires a one-time inspection for previous repairs of the aft fuselage skin panel at the longeron 28 skin splice; repetitive inspections for cracks of the same area; and related investigative and corrective actions. This AD also provides optional actions for extending the repetitive inspection intervals. The actions specified by this AD are intended to detect and correct cracks in the aft fuselage skin at the longeron 28 skin splice, which could lead to loss of structural integrity of the aft fuselage, resulting in rapid decompression of the airplane. This action is intended to address the identified unsafe condition.
AD 2007-02-11 · published Jan 24, 2007, effective Feb 28, 2007
EXTRA Flugzeugproduktions-und Vertriebs-GmbH Models EA-300, EA-300S, EA-300L, and EA-300/200 Airplanes
We are adopting a new airworthiness directive (AD) to supersede AD 2002-21-11, which applies to certain EXTRA Flugzeugbau GmbH (EXTRA) Model EA-300S airplanes. AD 2002-21-11 currently requires you to inspect, using a fluorescent dye check penetrant method, the upper longeron at the horizontal stabilizer attachment for cracks, repair any cracks found, and modify the horizontal stabilizer. That AD also requires a limit on operation to the Normal category until the initial inspection and modification on airplanes with less than 200 hours time-in-service is done. Since we issued AD 2002-21-11, cracks have been found on Models EA-300L and EA-300/200 airplanes. Consequently, this AD adds airplanes to the Applicability section and requires you to inspect and modify the upper longeron at the horizontal stabilizer attachment. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. We are issuing this AD to detect, correct, and prevent cracks in the upper longeron at the horizontal stabilizer attachment, which could result in structural failure of the aft fuselage. This failure could lead to loss of control.
AD 2007-02-12 · published Jan 24, 2007, effective Feb 13, 2007
Reims Aviation S.A. F406 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2007-01-08 · published Jan 25, 2007, effective Mar 1, 2007
Bombardier Model DHC-8-400 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Model DHC-8-400 series airplanes. This AD requires inspecting for fouling and chafing damage of the outboard brake control cable of the main landing gear, replacing the control cable if necessary, reworking the control cable cover, and, if applicable, manufacturing/installing an offset plate on the control cable cover. This AD results from a review of brake control cable operation conducted by the manufacturer. We are issuing this AD to prevent abrasion and wear of the outboard brake control cable, which could lead to cable separation and reduced control of airplane braking.
AD 2007-01-09 · published Jan 25, 2007, effective Mar 1, 2007
Boeing Model 747-100B SUD, 747-200B, 747-300, 747-400, 747-400D, and 747SP Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 747-100B SUD, 747-200B, 747-300, 747-400, 747- 400D, and 747SP series airplanes. This AD requires repetitive inspections for cracking of the crease beam and adjacent intercostals, stringers, frames, and skin panels; and related investigative and corrective actions if cracking is found. This AD results from a report indicating that an operator discovered crease beam cracking on two Model 747 airplanes. We are issuing this AD to detect and correct cracking of the crease beam and adjacent structure, which could become large and result in in-flight depressurization and inability of the airframe structure to sustain flight loads.
AD 2007-02-03 · published Jan 25, 2007, effective Mar 1, 2007
Bombardier Model DHC-8-400 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Bombardier Model DHC-8-400 series airplanes. That AD currently requires revising the airplane flight manual (AFM) to advise the flightcrew of appropriate procedures to follow in the event that a main landing gear (MLG) fails to extend following a gear-down selection. That AD also currently requires repetitive replacement of the left and right MLG uplock assemblies with new assemblies; and an inspection of the left and right MLG uplock rollers for the presence of an inner low friction liner, and corrective actions if necessary. This new AD revises the requirement for replacing the left and right MLG uplock assemblies by allowing replacement with alternative parts. For a certain MLG uplock assembly, this new AD requires repetitive inspections of the uplock hatch lower jaw for the presence of a wear groove and replacement with an improved part if necessary. For a certain MLG uplock assembly, this new AD requires repetitive inspections of the uplock roller to ensure that it rotates freely and replacement with a new part if necessary. This new AD allows optional replacement of the left and right MLG uplock assemblies with improved parts, which ends the requirements of the AFM revision and repetitive replacement and inspections. This new AD removes airplanes from the applicability. This AD results from development of a terminating action. We are issuing this AD to ensure that the flightcrew has the procedures necessary to address failure of an MLG to extend following a gear-down selection; and to detect and correct such failure, which could result in a gear-up landing and possible injury to passengers and crew.
AD 2007-02-10 · published Jan 25, 2007, effective Feb 9, 2007
Dassault Model Mystere-Falcon 900 and Falcon 900EX Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as smoke or fire, which could be fanned by oxygen leakage from the third crew member oxygen mask box. This AD requires actions that are intended to address the unsafe condition described in the MCAI.
AD 2007-02-13 · published Jan 25, 2007, effective Mar 1, 2007
DORNIER LUFTFAHRT GmbH Model 228-212 Airplanes
The FAA is adopting a new airworthiness directive (AD) for DORNIER LUFTFAHRT GmbH Model 228-212 airplanes. This AD requires you to inspect the landing gear carbon brake assembly. This AD results from mandatory continuing airworthiness information (MCAI) issued by the European Aviation Safety Agency (EASA), which is the airworthiness authority for the European Union. We are issuing this AD to inspect the landing gear carbon brake assembly to detect and replace loose bolts or self-locking nuts, which could result in the brake assembly detaching and malfunctioning, degrade brake performance and potentially cause loss of control of the aircraft during landing and roll-out.
AD 2007-02-14 · published Jan 25, 2007, effective Mar 1, 2007
Boeing Model 737-600, -700, -700C, -800, and -900 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -700C, -800, and -900 series airplanes. This AD requires testing the electrical resistance of the bond between the bulkhead fitting for the fuel feed line and the front spar of the left and right wings, inspecting an adjacent bonding jumper to make sure it is installed correctly, and performing corrective and other specified actions as applicable. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent arcing or sparking in the fuel tank in the event of a lightning strike, which could result in an uncontrolled fire or explosion.
AD 2007-02-15 · published Jan 25, 2007, effective Mar 1, 2007
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain EMBRAER Model ERJ 170 airplanes. This AD requires replacement of certain electrical bonding clamps and attaching hardware with new or serviceable parts, as applicable, and other specified action. This AD results from failure of an electrical bonding clamp, used to attach the electrical bonding straps to the fuel system lines. We are issuing this AD to prevent loss of bonding protection in the interior of the fuel tanks or adjacent areas that, in combination with lightning strike, could result in a fuel tank explosion and consequent loss of the airplane.
AD 2007-02-16 · published Jan 25, 2007, effective Mar 1, 2007
Saab Model SAAB-Fairchild SF340A (SAAB/SF340A) and SAAB 340B Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Saab Model SAAB-Fairchild SF340A and SAAB 340B airplanes. That AD currently requires repetitive inspections for wear of the brushes and leads and for loose rivets of the direct current (DC) starter generator, and related investigative/corrective actions if necessary. This new AD requires installing new, improved generator control units (GCUs). Installing the GCUs ends the repetitive inspection requirements of the existing AD. This AD results from reports of premature failures of the DC starter generator prior to scheduled overhaul. We are issuing this AD to prevent failure of the starter generator, which could cause a low voltage situation in flight and result in increased pilot workload and reduced redundancy of the electrical powered systems.
AD 2007-01-10 · published Jan 26, 2007, effective Mar 2, 2007
Boeing Model 747 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all Boeing Model 747 airplanes. That AD currently requires a one-time inspection to determine whether the outer cylinder of the wing landing gear has certain part numbers, and replacement of the outer cylinder of the wing landing gear with a new, improved, or reworked part if necessary. That AD also requires removal of the load evening system, if such a system is installed. This new AD requires, for certain airplanes, an additional one-time inspection to determine whether the outer cylinder has a certain other part number. For those certain airplanes, this new AD also requires replacement of the outer cylinder with a reworked or new, improved part and related investigative and corrective actions, if necessary. This AD results from identification of an additional unsafe part. We are issuing this AD to prevent fracture of the outer cylinder of the wing landing gear, which could result in collapse of the wing landing gear.
AD 2007-02-20 · published Jan 26, 2007, effective Mar 2, 2007
Fokker Model F27 Mark 050 and F.28 Mark 0070 and 0100 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Fokker Model F27 Mark 050 and F.28 Mark 0070 and 0100 airplanes. This AD requires repetitively removing the two existing escape rope assemblies in the flight compartment and installing new escape rope assemblies. This AD results from reports of findings of small cracks in the polyester assembly block in which the cotton escape rope is stored. A test revealed that the escape ropes had deteriorated over time, and the load capability was considerably reduced. We are issuing this AD to ensure that flightcrew members safely reach the ground after exiting the flight compartment window during an emergency evacuation.
AD 2007-02-21 · published Jan 26, 2007, effective Mar 2, 2007
Airbus Model A300 Airplanes; and Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A300 airplanes; and Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model C4-605R Variant F airplanes (collectively called A300-600 series airplanes). This AD requires replacing the pressure limiter of the parking brake system with a new or modified pressure limiter. This AD results from a report indicating that failure of the parking brake system occurred on a Model A300-600 airplane. We are issuing this AD to prevent failure of the parking brake system and interference with emergency use of the brake pedals, which could lead to airplane collision with surrounding objects or departure from the runway.
AD 2007-02-22 · published Jan 26, 2007, effective Mar 2, 2007
Airbus Model A310 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus Model A310 airplanes. This AD requires doing repetitive inspections for any missing, damaged, or incorrectly installed wiper rings in the splined couplings of the flap transmission shafts; inspections for any missing, damaged, or incorrectly installed rubber gaiters and straps on the sliding bearing/plunging joints of the flap transmission; and corrective action if necessary. This AD results from reviews in which the manufacturer determined that the splined couplings and sliding bearings of the flap transmission system could be affected by corrosion and wear. We are issuing this AD to detect and correct damaged, missing, or incorrectly installed components of the flap transmission system, which could result in reduced functional integrity of the flap transmission system and consequent reduced control of the airplane.
AD 2007-02-23 · published Jan 26, 2007, effective Mar 2, 2007
Boeing Model 777-200, -300, and -300ER Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 777-200, -300, and -300ER series airplanes. This AD requires replacement of the gimbal plates of the left and right outboard trailing edge flaps with improved gimbal plates and other specified actions. This AD results from a broken pivot link found on the inboard support for the outboard trailing edge flap. We are issuing this AD to prevent disconnection of the drive arm from its drive gimbal, due to a broken pivot link on an outboard flap support, which could result in unexpected roll of the airplane and loss of control of the airplane.
AD 2007-01-11 · published Jan 29, 2007, effective Mar 5, 2007
Bombardier Model DHC-8-100, -200, and -300 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Bombardier Model DHC-8-100, -200, and - 300 series airplanes. That AD currently requires modification of the flight compartment door; repetitive inspections for wear of the flight compartment door hinges following modification; and repair or replacement of the hinges with new hinges if necessary. This new AD requires using revised procedures for modifying and inspecting the flight compartment door and reduces the applicability of the existing AD. This AD results from a determination that certain cockpit doors are no longer subject to the existing requirements. We are issuing this AD to prevent failure of the alternate release mechanism of the flight compartment door, which could delay or impede the evacuation of the flightcrew during an emergency. This failure also could result in the flightcrew not being able to assist passengers in the event of an emergency.
AD 2007-02-18 · published Jan 29, 2007, effective Mar 5, 2007
Boeing Model 767-200 and -300 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD) that applies to certain Boeing Model 767-200, -300, and -300F series airplanes. That AD currently requires an inspection of visually accessible areas for indications of overheating of the heater tape attached to the potable water fill and drain lines in the forward and aft cargo compartments, exposed foam insulation or missing or damaged protective tape around the potable water fill and drain lines, and debris or contaminants on or near the potable water fill and drain lines. That AD also requires corrective action, as necessary. This new AD requires repetitive inspections of the forward and aft cargo compartments, as applicable, for discrepancies of the potable water supply and gray water drain lines; and applicable corrective actions if necessary. This AD also requires replacing the heater tapes on the potable water supply and gray water drain lines of the forward and aft cargo compartments, as applicable, with new ribbon heaters, or deactivating and removing any defective heater tape and wrapping the drain line with foam insulation; either action ends the repetitive inspections. This AD results from a report of a fire in the aft cargo compartment. We are issuing this AD to prevent overheating of the heater tape on potable water fill and drain lines, which may ignite accumulated debris or contaminants on or near the potable water fill and drain lines, resulting in a fire in the airplane.
AD 2007-02-19 · published Jan 29, 2007, effective Mar 5, 2007
Airbus Model A300 B4-605R Airplanes and Model A310-308, -324, and -325 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A300 B4-605R airplanes and Model A310-308, -324, and -325 airplanes. This AD requires modifying the Bruce floor plan electrical emergency path marking system (FPEEPMS) and, for certain airplanes, modifying the automatic switching of the emergency lighting system. This AD results from a report that in the case of vertical separation of the fuselage forward of door 1, the FPEEPMS and the exit signs do not turn on. We are issuing this AD to prevent inadequate lighting and marking of the escape path, which could delay or impede the flightcrew and passengers when exiting the airplane during an emergency landing.
AD 2007-02-24 · published Jan 29, 2007, effective Mar 5, 2007
Boeing Model 747 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 747 airplanes. This AD requires repetitive inspections for cracking of the web of the station (STA) 2360 aft pressure bulkhead around the fastener heads in the critical fastener rows in the web lap joints, from the Y-chord to the inner ring; and repair if necessary. This AD also requires a modification, which terminates the repetitive inspections. This AD results from analysis by the manufacturer that the radial lap splices of the STA 2360 aft pressure bulkhead are subject to widespread fatigue damage. We are issuing this AD to detect and correct cracking of the bulkhead web at multiple sites along the radial lap splice, which could join together to form cracks of critical length, and result in rapid decompression and loss of control of the airplane.
AD 2007-03-01 · published Jan 29, 2007, effective Mar 5, 2007
Boeing Model 757 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 757 airplanes. This AD requires inspecting certain power feeder wire bundles for damage, inspecting the support clamps for these wire bundles to determine whether the clamps are properly installed, and performing corrective actions if necessary. This AD results from a report that a power feeder wire bundle chafed against the number six auxiliary slat track, causing electrical wires in the bundle to arc, which damaged both the auxiliary slat track and power feeder wires. We are issuing this AD to prevent arcing that could be a possible ignition source for leaked flammable fluids, which could result in a fire. Arcing could also result in a loss of power from the generator connected to the power feeder wire bundle, and consequent loss of systems, which could reduce controllability of the airplane.
AD 2007-01-12 · published Jan 30, 2007, effective Mar 6, 2007
Dassault Model Mystere-Falcon 50 and 900, and Falcon 900EX Airplanes; and Model Falcon 2000 and Falcon 2000EX Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Model Mystere-Falcon 50 and 900, and Falcon 900EX airplanes; and Model Falcon 2000 and Falcon 2000EX airplanes. This AD requires an inspection of the identification plates of the outboard slats to determine the type of identification plates and the part numbers. For certain airplanes, this AD also requires a revision to the Limitations and Normal Procedures sections of the airplane flight manual to provide procedures for operation in icing conditions; and replacement of the anti-icing manifold with an anti-icing manifold of the correct type design if necessary. For certain airplanes, this AD also requires related investigative and corrective actions if necessary. This AD results from a finding that the outboard slats for Model Mystere-Falcon 50 airplanes have been erroneously authorized, in limited cases, as interchangeable for use on Model Mystere-Falcon 900 and Falcon 900EX airplanes; and Model Falcon 2000 and Falcon 2000EX airplanes. We are issuing this AD to prevent failure of the anti-icing manifold of the outboard slats, which could result in loss of control of the airplane.
AD 2007-01-13 · published Jan 30, 2007, effective Mar 6, 2007
Airbus Model A310-300 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A310-300 airplanes. This AD requires replacing the existing non-return valve (NRV) of the auxiliary center tanks (ACTs) of the fuel system with a new, improved NRV. This AD results from a report that it was not possible to transfer fuel from ACTs 1 and 2 during flight, and no electronic centralized aircraft monitor warnings were triggered. Investigation revealed a faulty static inverter and blown fuse, resulting in failure of certain fueling bus bars and subsequent failure of the automatic ACT fuel transfer. We are issuing this AD to prevent these failures, combined with failure of the NRV to close. If the NRV is open during flight, the fuel supply to the engines may be reduced during cross-feed operation to the extent that fuel starvation could occur and result in engine flameout.
AD 2007-01-14 · published Jan 30, 2007, effective Mar 6, 2007
Bombardier Model DHC-8-400 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Model DHC-8-400 series airplanes. This AD requires revising the Airworthiness Limitations Items (ALI) of the maintenance requirements manual to require additional inspection requirements of the maintenance requirements manual for certain principal structural elements (PSEs) related to fuselage cutouts and to reduce an inspection threshold for an existing ALI task on the aft entry door. This AD results from data obtained from the manufacturer's fatigue testing. We are issuing this AD to detect and correct fatigue cracking of certain PSEs, which could result in reduced structural integrity of the airplane.
AD 2007-03-03 · published Jan 31, 2007, effective Mar 7, 2007
Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD requires repetitive inspections to detect cracks in the vertical beam webs of the body station (BS) 178 bulkhead, and corrective actions if necessary. This AD also requires a terminating modification for the repetitive inspections. This AD results from reports of numerous cracks in the vertical beam webs. We are issuing this AD to prevent fatigue cracks in certain vertical beam webs, which could result in loss of structural integrity of the BS 178 bulkhead, and consequently could impair the operation of the control cables for the elevators, speed brakes, and landing gear, or could cause the loss of cabin pressure.
AD 2007-03-04 · published Jan 31, 2007, effective Feb 15, 2007
Airbus Model A330-200, A330-300, A340-200, A340-300, A340-500, and A340-600 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracking of the wing MLG (main landing gear) rib 6 aft bearing forward lugs, which could result in reduced structural integrity of the MLG attachment. This AD requires actions that are intended to address the unsafe condition described in the MCAI.
AD 2007-03-05 · published Jan 31, 2007, effective Feb 15, 2007
Gulfstream Aerospace LP Model Gulfstream 100 Airplanes, and Model Astra SPX and 1125 Westwind Astra Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The unsafe condition is incomplete closure of the main entry door, which may result in the door opening in flight, causing damage to wing, fuselage, engine, and/or tail, and possible damage to the airplane. This AD requires actions that are intended to address the unsafe condition described in the MCAI.
AD 2007-01-06 · published Jan 9, 2007, effective Feb 13, 2007
Bell Helicopter Textron Canada Model 206A, B, L, L-1, L-3, and L-4 Helicopters
This amendment supersedes an existing airworthiness directive (AD) for the specified Bell Helicopter Textron Canada (BHTC) model helicopters. The existing AD currently requires certain inspections and checks of the tail rotor blade (blade) for a deformation, a crack, and a bent or deformed tail rotor weight (weight). Also, that AD requires, before further flight, replacing each blade with an airworthy blade if a deformation, a crack, or a bent or deformed weight is found. This action contains the same actions as the existing AD and also adds to the applicability certain serial-numbered blades inadvertently omitted from the current AD. This action also requires replacing each affected blade, which is a terminating action. This amendment is prompted by three reports of skin cracks originating near the blade trailing edge balance weight. The actions specified by this AD are intended to prevent blade failure and subsequent loss of control of the helicopter.
AD 2007-01-05 · published Jan 10, 2007, effective Feb 14, 2007
Sikorsky Aircraft Corporation Model S-61L, N, R, and NM Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Sikorsky Aircraft Corporation (Sikorsky) model helicopters that requires, within a specified time, creating a component history card or equivalent record. The AD also requires recording the hours time-in-service (TIS) and the external lift cycles (lift cycles) for each main gearbox input left and right freewheel unit (IFWU) assembly. Also, the AD requires calculating a moving average of lift cycles per hour TIS at specified intervals on each IFWU assembly. The moving average is used to determine if an IFWU assembly is used in repetitive external lift (REL) or non-REL helicopter operations. If an IFWU assembly is used in REL operations, this AD requires a visual and dimensional inspection of the IFWU assembly at specified intervals. This AD also requires recording certain information and replacing each part that is beyond the wear limits or that exhibits visual surface distress with an airworthy part. In addition, this AD requires permanently marking the REL IFWU camshafts and gear housings with the letters "REL" on the surface of these parts. This amendment is prompted by an accident in which the left and right IFWU assembly on a helicopter slipped or disengaged resulting in both engines over speeding, engine shutdowns, and loss of engine power to the transmissions. The actions specified by this AD are intended to prevent slipping in the IFWU assembly, loss of engine power to the transmissions, and subsequent loss of control of the helicopter.
AD 2006-26-07 · published Jan 3, 2007, effective Jan 18, 2007
Turbomeca Model Arrius 2B1, 2B1A, and 2B2 Turboshaft Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2007-01-04 · published Jan 10, 2007, effective Jan 25, 2007
Turbomeca Artouste III B and III B1 Turboshaft Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2007-02-05 · published Jan 22, 2007, effective Feb 6, 2007
Rolls-Royce plc RB211 Trent 700 Series Turbofan Engines
The FAA is superseding an existing airworthiness directive (AD) for Rolls-Royce plc (RR) RB211 Trent 700 series turbofan engines. That AD currently requires initial and repetitive borescope inspections of the high pressure-and-intermediate pressure (HP-IP) turbine internal and external oil vent tubes for coking and carbon buildup, and cleaning or replacing the vent tubes if necessary. This AD requires the same actions but uses more stringent tube replacement criteria than the previous AD. This AD results from a recent incident where an RB211 Trent 700 series turbofan engine had an oil vent tube rupture as a result of blockage, leading to significant loss of engine oil. The incident indicates that further measures are necessary to control carbon buildup in the oil vent tubes. We are issuing this AD to prevent internal oil fires due to coking and carbon buildup, that could cause uncontained engine failure and damage to the airplane.
AD 2007-02-07 · published Jan 22, 2007, effective Feb 26, 2007
Rolls-Royce Deutschland Ltd & Co KG Dart 528, 529, 532, 535, 542, and 555 Series Turboprop Engines
The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce Deutschland Ltd & Co KG (RRD) Dart 528, 529, 532, 535, 542, and 555 series turboprop engines. This AD requires a dimensional inspection of the intermediate pressure turbine (IPT) disk or an ultrasonic inspection of the seal arm contact between the high pressure turbine (HPT) and the IPT disk seal arm and rework or replacement of the IPT disk if wear outside acceptable limits is found. This AD results from reports of a number of HPT disk failures, some of which resulted in portions of the HPT disk being released. We are issuing this AD to prevent HPT disk failure, which can result in an uncontained engine failure and damage to the airplane.
AD 2007-02-06 · published Jan 24, 2007, effective Feb 28, 2007
Pratt & Whitney PW2000 Series Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for Pratt & Whitney PW2000 series turbofan engines. This AD requires a onetime focused visual and fluorescent penetrant inspection (FPI) of 21 suspect PW2000 8th stage high pressure compressor (HPC) drum rotor disk assemblies. This AD results from a PW2037 8th stage HPC drum rotor disk assembly failure event caused by tooling damage that occurred during disk assembly manufacture. We are issuing this AD to prevent 8th stage HPC drum rotor disk assembly failure that could result in an uncontained engine failure and damage to the airplane.
AD 2007-02-17 · published Jan 26, 2007, effective Mar 2, 2007
Turbomeca Arriel 1 Series Turboshaft Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
AD 2007-03-02 · published Jan 29, 2007, effective Mar 5, 2007
Rolls-Royce Deutschland Ltd & Co KG Tay 611-8, Tay 620-15, Tay 650-15, and Tay 651-54 Series Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce Deutschland Ltd & Co KG (RRD) Tay 611-8, Tay 620-15, Tay 650-15, and Tay 651-54 series turbofan engines, with certain low pressure (LP) compressor modules installed. This AD requires an ultrasonic inspection (UI) of LP compressor fan blades for cracks, within 30 days after the effective date of the AD on certain serial number (SN) Tay 650-15 engines. This AD also requires initial and repetitive UIs of LP compressor fan blades on all engines. This AD also requires, for Tay 650-15 and Tay 651-54 engines, UIs of LP compressor fan blades whenever the blade set is removed from one engine and installed on a different engine. This AD results from a report that a set of LP compressor fan blades failed before reaching the LP compressor fan blade full published life limit. We are issuing this AD to prevent LP compressor fan blades from failing due to blade root cracks, leading to uncontained engine failure and damage to the airplane.
AD 2007-01-03 · published Jan 9, 2007, effective Jan 29, 2007
Stemme GmbH & Co. KG Model S10-VT Gliders
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
