Airworthiness Directive · Amendment 39-22355 · Reciprocating engine power section
Continental Aerospace Technologies, Inc. Reciprocating Engines
Superseded. A later AD replaced this one: AD 2023-05-16. Comply with the one in force.
Continental Aerospace Technologies, Inc. (Continental) GTSIO-520-C, -D, -H, -K, -L, -M, -N, and -S; IO-360-A, -AB, -AF, -C, -CB, -D, -DB, -E, -ES, -G, -GB, -H, -HB, -J, -JB, -K, and -KB; IO-470-D, -E, -G, -H, -J, -K, -L, -M, -N, -P, -R, -S, -T, -U, -V, and -VO; IO-520-A, -B, -BA, -BB, -C, -CB, -D, -E, -F, -J, -K, -L, -M, and -MB; IO-550-A, -B, -C, -D, -E, -F, -G, -L, -N, -P, and -R; LTSIO-360-E, -EB, -KB, and -RB; LTSIO-520-AE; O-470-A, -B, -E, -G, -H, -J, -K, -L, -M, -N, -R, -S, -T, and -U; TSIO-360-A, -AB, -B, -BB, -C, -CB, -D, -DB, -E, -EB, -G, -GB, -H, -HB, -JB, -KB, -LB, -MB, -RB, and -SB; TSIO-520-A, -AE, -AF, -B, -BB, -BE, -C, -CE, -D, -DB, -E, -EB, -G, -H, -J, -JB, -K, -KB, -L, -LB, -M, -NB, -P, -R, -T, -UB, -VB, and -WB; TSIO-550-A, -B, -C, -E, -G, -K, and -N; TSIOF-550-K; and TSIOL-550-A, -B, and -C model reciprocating engines.
The FAA is adopting a new airworthiness directive (AD) for certain Continental Aerospace Technologies, Inc. (Continental) GTSIO- 520-C, -D, -H, -K, -L, -M, -N, and -S; IO-360-A, -AB, -AF, -C, -CB, -D, -DB, -E, -ES, -G, -GB, -H, -HB, -J, -JB, -K, and -KB; IO-470-D, -E, -G, -H, -J, -K, -L, -M, -N, -P, -R, -S, -T, -U, -V, and -VO; IO-520-A, -B, -BA, -BB, -C, -CB, -D, -E, -F, -J, -K, -L, -M, and -MB; IO-550-A, -B, - C, -D, -E, -F, -G, -L, -N, -P, and -R; LTSIO-360-E, -EB, -KB, and -RB; LTSIO-520-AE; O-470-A, -B, -E, -G, -H, -J, -K, -L, -M, -N, -R, -S, -T, and -U; TSIO-360-A, -AB, -B, -BB, -C, -CB, -D, -DB, -E, -EB, -G, -GB, - H, -HB, -JB, -KB, -LB, -MB, -RB, and -SB; TSIO-520-A, -AE, -AF, -B, - BB, -BE, -C, -CE, -D, -DB, -E, -EB, -G, -H, -J, -JB, -K, -KB, -L, -LB, -M, -NB, -P, -R, -T, -UB, -VB, and -WB; TSIO-550-A, -B, -C, -E, -G, -K, and -N; TSIOF-550-K; and TSIOL-550-A, -B, and -C model reciprocating engines. This AD was prompted by a report of a quality escape involving improper installation of counterweight retaining rings in the engine crankshaft counterweight groove during manufacture. This AD requires inspection of the crankshaft assembly for proper installation of the counterweight retaining rings in the counterweight groove, and corrective actions if improper installation is found. The FAA is issuing this AD to address the unsafe condition on these products.
For affected engines with an installed crankshaft assembly identified in paragraphs (g)(1) or (2) of this AD, before further flight, do the actions identified in, and in accordance with paragraph III, Action Required, of Continental Mandatory Service Bulletin MSB23-01, Revision A, dated February 16, 2023 (MSB23-01A).
(1) Crankshaft assembly having a crankshaft serial number listed in Appendix 1 of MSB23-01A; or
(2) Crankshaft assembly that was repaired or installed on or after June 1, 2021, having a part number and crankshaft serial number listed in Appendix 2 of MSB23-01A.
Where paragraph III.1.a. of MSB23-01A specifies actions for spare crankshaft assemblies, this AD does not require those actions.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
