29 Airworthiness Directives: 17 airplane, 3 rotorcraft, 8 engine, 1 appliance.
AD 2023-22-08 · published Nov 3, 2023, effective Nov 20, 2023
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-04- 12, which applied to all Airbus SAS Model A350-941 and -1041 airplanes. AD 2023-04-12 required repetitive detailed inspections of affected cargo sealing tapes and applicable corrective actions. Since the FAA issued AD 2023-04-12, additional locations have been identified that are subject to the unsafe condition. This AD retains the requirements of AD 2023-04-12 and expands the inspection area, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-01 · published Nov 6, 2023, effective Dec 11, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-01- 13, which applied to all Dassault Aviation Model MYSTERE-FALCON 200 airplanes. AD 2020-01-13 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2020-01- 13 and require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-02 · published Nov 6, 2023, effective Dec 11, 2023
Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-18- 14, which applied to certain Airbus SAS Model A330-200 series, A330-200 Freighter series, A330-300 series, A330-800 series, and A330-900 series airplanes. AD 2022-18-14 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2022-18- 14, and also requires revising the existing maintenance or inspection program, as applicable to incorporate additional new or more restrictive airworthiness limitations; as specified in two European Union Aviation Safety Agency (EASA) ADs, which are incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-04 · published Nov 6, 2023, effective Dec 11, 2023
Embraer S.A. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. (Embraer) Model EMB-505 airplanes. This AD was prompted by occurrences of an uncommanded change in the setting of the barometric pressure in both primary flight displays (PFDs). This AD requires installing a new version of the airplane avionics system software, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-09 · published Nov 13, 2023, effective Dec 18, 2023
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 777-200, 777-200LR, 777-300, 777-300ER, and 777F series airplanes. This AD was prompted by a report of a "FLAPS DRIVE" caution message in flight due to the torque trip indicator of the No. 2 trailing edge (TE) flap transmission assembly being in the set position, which resulted in an air turn-back. This AD requires an inspection or records review to determine the serial numbers of the TE flap transmission and gearbox assemblies, and applicable on-condition corrective actions. This AD also limits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-11 · published Nov 20, 2023, effective Dec 26, 2023
Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model ERJ 190-100 STD, -100 LR, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary and a determination by the design approval holder (DAH) that some structural elements are subject to widespread fatigue damage (WFD). This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, and for certain airplanes requires a structural modification of the wing lower skin panels, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-12 · published Nov 20, 2023, effective Dec 26, 2023
MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by a report of missing insulation in the engine pylon area. This AD requires, for certain airplanes, inspecting the engine pylon structure for discrepancies and repair if necessary. This AD also requires revising the existing maintenance or inspection program, as applicable, to incorporate a new certification maintenance requirement (CMR) task. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-05 · published Nov 20, 2023, effective Dec 26, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-23- 10, which applied to certain Dassault Aviation Model FAN JET FALCON and FAN JET FALCON SERIES C, D, E, F, and G airplanes. AD 2020-23-10 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2020-23-10 and requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-07 · published Nov 20, 2023, effective Dec 26, 2023
Deutsche Aircraft GmbH (Type Certificate Previously Held by 328 Support Services GmbH; AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Deutsche Aircraft GmbH Model 328-100 airplanes. This AD was prompted by a report of finding cracks in fuselage frames (FR) 24 and FR26. This AD requires a one-time detailed and eddy current inspection of fuselage FR24 and FR26 (left and right sides), performing corrective actions if necessary, and reporting the inspection results, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-09 · published Nov 20, 2023, effective Dec 26, 2023
Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by a report that the axis index washers on the forward and rear main landing gear door hinges were found inverted in production. This AD requires a one-time detailed inspection of the axis index washers for correct installation, and, depending on findings, replacement of the axis index washers, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-10 · published Nov 20, 2023, effective Dec 26, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-02- 13, which applied to certain Dassault Aviation Model FAN JET FALCON, FAN JET FALCON SERIES C, D, E, F, and G airplanes. AD 2020-02-13 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2020-02-13 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-11 · published Nov 20, 2023, effective Dec 26, 2023
Embraer S.A. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. (Embraer) Model EMB-505 airplanes. This AD was prompted by an occurrence of corrosion on the clutch retaining bolt of the aileron autopilot servo mount. This AD requires repetitively replacing the clutch retaining bolt and washer of the aileron autopilot servo mount, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-06 · published Nov 21, 2023, effective Nov 21, 2023
Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 96-12-20, which applied to certain Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G airplanes. AD 96-12-20 required visual inspections to detect loose, missing, or deformed fasteners in the upper truss mounts of certain engines, visual inspections to detect cracking in the associated lugs, repetitive ultrasonic inspections to detect cracking of the upper lugs, and replacement of damaged or cracked parts. AD 96-12-20 also provided for an optional terminating action for the repetitive inspections. This AD was prompted by reports of fatigue cracking of the lugs of the upper truss mount, and by reports of cracks found prior to the initial inspection times required by AD 96-12-20 and the determination that the terminating action is no longer valid. This AD requires one-time inspections for cracked or severed engine truss mount upper lugs of the outboard engines, and replacement of the engine truss mount if necessary. This AD also revises the applicability to include all Model 382, 382B, 382E, 382F, and 382G airplanes, and all Model EC-130Q, C-130H, HP-C-130A, C-130A, and C-130B (including Model 282- 44A-05) airplanes. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-12 · published Nov 22, 2023, effective Dec 27, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-04- 18, which applied to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-04-18 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-04-18 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-13 · published Nov 24, 2023, effective Dec 29, 2023
Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-04- 15, which applied to certain Dassault Aviation Model FALCON 7X airplanes. AD 2023-04-15 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2023-04- 15 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-23-05 · published Nov 29, 2023, effective Dec 14, 2023
Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a design review of the avionic architecture of the pitch trim indication and alerting system that revealed software errors could generate misleading pitch trim indication to the crew, leading to incorrect horizontal stabilizer positioning at takeoff. This AD requires revising the Emergency Procedures and Normal Procedures of the existing airplane flight manual (AFM) to ensure the horizontal stabilizer is correctly configured prior to takeoff. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-23-14 · published Nov 30, 2023, effective Dec 15, 2023
The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 747 airplanes. This AD was prompted by reports of latent failures of the lightning protection features for the engine fuel feed system. This AD requires an inspection for damage and a measurement of the electrical bonding resistance of the out-tank fuel feed tube bonding jumper in the strut for each of the four engines, a measurement of the electrical bonding resistance of the forward side of the front spar bulkhead fitting adapter for each of the four engines, and applicable related investigative and corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-23-01 · published Nov 14, 2023, effective Nov 29, 2023
Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2022-01- 05, which applied to certain Airbus Helicopters Model EC130T2 helicopters. AD 2022-01-05 required repetitive visual inspections of the rivets on the rear transmission shaft bearing support, inspections of the local structure, and rivet heads on the left-hand and right-hand sides of the rear transmission shaft bearing support for cracking, missing, loose, or sheared rivets. AD 2022-01-05 also required reporting the results of those inspections and depending on the results, applicable corrective action. Since the FAA issued AD 2022-01- 05, Airbus Helicopters revised its service information to add procedures to improve visual inspections of the rivets on the rear transmission shaft bearing support. This AD was prompted by the determination that certain modified helicopters may have finishing paint applied to the gutter, which could prevent detection of cracks during inspections. This AD also extends the repetitive compliance time interval for certain inspections. This AD continues to require certain actions in AD 2022-01-05 and requires a one-time visual inspection for paint in the gutter area, and removal of paint if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-03 · published Nov 20, 2023, effective Dec 26, 2023
Safran Helicopter Engines, S.A. (Type Certificate Previously Held by Turbomeca, S.A.) Engines
The FAA is superseding Airworthiness Directive (AD) 2021-08-02 for all Safran Helicopter Engines, S.A. (Safran) (type certificate previously held by Turbomeca, S.A.) Model Arriel 2D and Arriel 2E engines. AD 2021-08-02 required replacing certain critical parts before reaching their published in-service life limits, performing scheduled maintenance tasks before reaching their published periodicity, and performing unscheduled maintenance tasks when the engine meets certain conditions. Since the FAA issued AD 2021-08-02, Safran has revised the airworthiness limitation section (ALS) of the existing maintenance and overhaul manuals, introducing new and more restrictive instructions and maintenance tasks, which prompted this AD action. This AD requires updating the ALS of the existing engine maintenance manual (EMM) or instructions for continued airworthiness (ICA) and the existing approved maintenance or inspection program, as applicable, by incorporating the actions and associated thresholds and intervals, including life limits, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
AD 2023-22-14 · published Nov 20, 2023, effective Dec 26, 2023
Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Model SA-365C1, SA-365C2, and SA-365N helicopters. This AD was prompted by reports of damaged control rod dual bearings (dual bearings) that are installed on the tail rotor gearbox (TGB). This AD requires repetitively inspecting the TGB magnetic plug for particles, analyzing any particles collected, taking corrective actions if necessary, and reporting certain information. Finally, this AD allows an affected dual bearing to be installed on a helicopter if certain actions are accomplished, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-20-03 · published Nov 6, 2023, effective Dec 11, 2023
Austro Engine GmbH Engines
The FAA is adopting a new airworthiness directive (AD) for certain Austro Engine GmbH Model E4 and E4P engines. This AD is prompted by reports of piston failures and the determination that certain batches of pistons were manufactured with a dimensional deviation in the piston pin bore and piston diameter. This AD requires repetitive engine oil analysis for aluminum content outside the acceptable limits and, if necessary, replacement of the pistons, piston rings, con-rods assembly, and crankcase or, as an alternative, replacement of the engine core. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-03 · published Nov 6, 2023, effective Dec 11, 2023
Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is superseding Airworthiness Directive (AD) 2013-26-10 for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model RB211- 524G2-19, RB211-524G3-19, RB211-524H-36, and RB211-524H2-19 engines. AD 2013-26-10 required a one-time reduction in the cyclic life of certain high-pressure compressor (HPC) rotor stage 1 and stage 2 disks, and removal of disks that exceed the reduced cycle life. Since the FAA issued AD 2013-26-10, the manufacturer has revised the engine time limits manual (TLM), introducing new and more restrictive instructions. This AD is prompted by the manufacturer revising the engine time limits manual, introducing new and more restrictive instructions. This AD requires revisions to the airworthiness limitations section (ALS) of the operator's existing approved engine maintenance or inspection program, as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-07 · published Nov 6, 2023, effective Dec 11, 2023
General Electric Company Engines
The FAA is superseding Airworthiness Directive (AD) 2018-03-13 for certain General Electric Company (GE) Model CT7-5A2, CT7-5A3, CT7- 7A, CT7-7A1, CT7-9B, CT7-9B1, CT7-9B2, CT7-9C, and CT7-9C3 engines. AD 2018-03-13 required initial and repetitive visual inspections and fluorescent penetrant inspections (FPIs) of the main propeller shaft. This AD was prompted by an in-flight failure of a main propeller shaft on a GE Model CT7-9B engine, resulting in the loss of the propeller. This AD requires initial and repetitive visual inspections, FPIs, and ultrasonic inspections (USIs) of the main propeller shaft. Depending on the results of these inspections, this AD requires replacement of the main propeller shaft. As an optional terminating action to these inspections, this AD requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) and the operator's existing approved maintenance program or inspection program, as applicable, to incorporate incorporating the tasks and reduced inspection thresholds for the main propeller shaft. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-08 · published Nov 14, 2023, effective Dec 19, 2023
Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is superseding Airworthiness Directive (AD) 2021-21-13 for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000 engines. AD 2021-21-13 required the operator to revise the airworthiness limitation section (ALS) of their existing approved aircraft maintenance program (AMP) by incorporating the revised tasks of the applicable time limits manual (TLM) for each affected model engine. Since the FAA issued AD 2021-21-13, the manufacturer has revised the TLM, introducing new and more restrictive instructions. This AD is prompted by the manufacturer revising the engine TLM life limits of certain critical rotating parts. This AD requires revisions to the ALS of the operator's existing approved AMP, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-01 · published Nov 20, 2023, effective Dec 26, 2023
Rolls-Royce Deutschland Ltd & Co Engines
The FAA is superseding Airworthiness Directive (AD) 2020-15-07 for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) (type certificate previously held by Rolls-Royce plc) Model RB211-524G2-19, RB211-524G2- T-19, RB211-524G3-19, RB211-524G3-T-19, RB211-524H2-19, RB211-524H2-T- 19, RB211-524H-36, and RB211-524H-T-36 engines. AD 2020-15-07 required replacement of the low-pressure turbine (LPT) stage 1 disk with part number (P/N) UL37606, UL37607, UL37608, UL37722, or UL37790, installed. This AD was prompted by an updated analysis by the engine manufacturer, which indicates certain part-numbered and serial-numbered LPT stage 1 disks that have undergone rework could fail before the current published life limits. This AD retains the requirement to replace the LPT stage 1 disk and includes additional LPT stage 1 disks, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-02 · published Nov 20, 2023, effective Dec 26, 2023
Pratt & Whitney Division Engines
The FAA is superseding Airworthiness Directive (AD) 2018-02- 10, which applied to certain Pratt & Whitney Division (PW) Model PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, and PW4090-3 engines. AD 2018-02-10 required performing repetitive fluorescent penetrant inspections (FPIs) to detect cracks in the outer diffuser case (ODC), removal of any ODC that fails inspection, and updating the mandatory inspections in the Airworthiness Limitations Section (ALS) of the Instructions for Continued Airworthiness (ICA). Since the FAA issued AD 2018-02-10, PW developed a modification to reduce the susceptibility of ODC cracking. This AD retains the ALS update requirement from AD 2018-02-10, requires replacing certain ODC part numbers with parts eligible for installation, expands the applicability to all ODC part numbers, and adjusts the compliance threshold of the FPIs of the ODC. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-22-04 · published Nov 20, 2023, effective Dec 26, 2023
Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2, and Trent 1000-L2 engines. This AD was prompted by reports of cracking and separation of certain low-pressure turbine (LPT) stage 1 blade assemblies. This AD requires initial and repetitive inspections of affected LPT stage 1 blade assemblies for cracking or separation and, depending on the results of the inspections, reduction of the inspection interval or replacement of the LPT stage 1 blade set and disk, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-23-13 · published Nov 30, 2023, effective Jan 4, 2024
Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model RB211-Trent 800 engines. This AD is prompted by reports of cracks on certain intermediate-pressure compressor (IPC) rotor shaft balance lands. This AD requires initial and repetitive on-wing or in-shop borescope inspections (BSIs) of certain IPC rotor shaft balance lands for cracks, dents, and nicks, and replacement of the IPC rotor shaft if necessary, and would prohibit the installation of a certain IPC rotor shaft on any engine, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
AD 2023-21-05 · published Nov 7, 2023, effective Dec 12, 2023
Thales AVS France SAS Flight Management Computer Navigation Modules
The FAA is adopting a new airworthiness directive (AD) for certain Thales AVS France SAS (Thales) flight management computer navigation modules (FMC2 NAVM) installed on, but not limited to, airplanes. This AD was prompted by reports that, due to software issues, certain FMC2 NAVM navigation modules provide erroneous data to the flight management computer, compromising safe flight of the airplane. This AD requires revising the existing aircraft flight manual (AFM) for your airplane and updating the navigation database. This AD also prohibits installing a database unless certain procedures were removed. The FAA is issuing this AD to address the unsafe condition on these products.
