Eurocopter Airworthiness Directives

Every AD in the library that names a Eurocopter aircraft model, gathered from its model pages.

19 not superseded, 1 of them with a repeat action. 21 listed in all, newest published July 15, 2021.

Published sinceHide 2 supersededOnly repeat actions19 of 21

2006-10-19Eurocopter France Model EC130 B4 HelicoptersRotorcraftRepeat actionJun 12, 2006
2021-14-07Requires reporting certain information and prohibits the installation of an affected hoist until the required actions are accomplishedCabin equipment/furnishings · RotorcraftSupersedes 2003-25-01Jul 15, 2021
2015-10-05Requires inspecting the junction units of the external life raft deployment system for corrosion, removing any corrosion, and performing certain measurements to determine whether the junction unit must be replacedEquipment/furnishing · RotorcraftMay 21, 2015
2013-05-21Requires installing a vibration damper casing assembly on both sides of the helicopterHelicopter vibration analysis · RotorcraftMar 26, 2013
2012-21-09Requires inspecting the epicyclic module for the presence of a through-hole upstream of the magnetic plugMain rotor gearbox · RotorcraftOct 23, 2012
2011-10-12Eurocopter France Model AS350B, B1, B2, B3, BA, and EC130 B4 HelicoptersRotorcraftMay 18, 2011
2011-06-07Eurocopter France (Eurocopter) Model EC130 B4 HelicoptersRotorcraftMar 22, 2011
2010-22-08Requires replacing all servo-controls that are identified in the Applicability section of this ADEurocopter France Model AS 350 B, BA, B1, B2, B3, and D, and Model AS355 E, F, F1, F2, and N Helicopters · RotorcraftOct 22, 2010
2010-15-03Eurocopter France Model EC 130 B4 HelicoptersRotorcraftAug 5, 2010
2010-06-07Eurocopter France Model AS 332 C, L, L1, and L2; AS 350 B3; AS355 F, F1, F2, and N; SA 365N and N1; AS 365 N2 and N3; SA 366G1; EC 130 B4; and EC 155B and B1 HelicoptersRotorcraftMar 17, 2010
2008-06-22Requires inspecting the pilot and co-pilot collective levers for proper bonding between the twist grip drive tubes and the control pinions and if debonding is present, replacing the collective levers before further...Eurocopter France Model EC130 B4 Helicopters · RotorcraftMar 24, 2008
2008-05-16Eurocopter France Model EC130 B4 HelicoptersRotorcraftMar 12, 2008
2008-05-15Tail rotor drive--tail rotor drive shaftRotorcraftMar 12, 2008
2006-19-01Eurocopter Model AS350B, B1, B2, B3, BA, D, and AS355E HelicoptersRotorcraftSep 12, 2006
2005-03-08Requires removing and modifying the fuel bleed leverEurocopter France Model AS350B, BA, B1, B2, B3, C, D, D1, and EC130 B4 Helicopters · RotorcraftFeb 14, 2005
2004-12-06Eurocopter France Model EC 155 B and B1 HelicoptersRotorcraftJun 14, 2004
2004-11-05Requires inspecting the fuel transfer line and air exhaust duct for chafing, inspecting the air exhaust duct for a hole, and if necessary, repositioning the air exhaust duct to achieve the minimum clearancesEurocopter France Model EC 130 B4 and AS 350 B3 Helicopters · RotorcraftJun 4, 2004
2003-14-19Requires removing certain main servocontrols and replacing them with servocontrols that do not fall within the "Applicability" of this AD at specified intervalsEurocopter France Model SA-365N, N1, AS-365N2, AS 365 N3, SA-366G1, AS355F, F1, F2, N, and EC130 B4 Helicopters · RotorcraftJul 17, 2003
2002-03-52Requires checking for a gap between the adhesive bead and the metal bushing bonded on each STARFLEX star arm end (arm end) and, if a gap is found, replacing the STARFLEX with an airworthy partEurocopter France Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350C, AS350D, AS350D1, AS355E, AS355F, AS355F1, AS355F2, AS355N, and EC130 B4 Helicopters · RotorcraftSupersedes 2002-02-51Mar 20, 2002

Listed by the model designations in each AD's text. An AD written for a part number, or for "all" engines of a maker, may name no model and so not appear here: search the library for the part or the maker as well.