Air Tractor AT-802A Airworthiness Directives

Every AD in the library whose text names the Air Tractor AT-802A, of which 553 are registered in the US.

13 not superseded, 5 of them with a repeat action. 23 listed in all, newest published August 20, 2024.

Published sinceHide 10 supersededOnly repeat actions13 of 23

2024-16-06Requires repetitively inspecting the left and right, forward and rear, horizontal stabilizer spars for cracks at shorter intervals than those required by AD 2023-15-07, replacing any horizontal stabilizer spar found...Horizontal stabilizer structure · AirplaneSupersedes 2023-15-07Repeat actionAug 20, 2024
2021-05-14Requires repetitive visual and dye penetrant inspections of the flap actuator attachment bracket welds for cracks and replacement if cracks are identifiedTe flap control system · AirplaneRepeat actionMar 25, 2021
2014-16-17WingsAirplaneSupersedes 2010-17-18 R1Repeat actionAug 25, 2014
2009-11-05Continue repetitively inspecting the engine mounts for cracks for all previously affected Air Tractor, IncAir Tractor, Inc. Models AT-400, AT-400A, AT-402, AT-402A, AT-402B, AT-502, AT-502A, AT-502B, AT-503A, AT-602, AT-802, and AT-802A Airplanes · AirplaneSupersedes 2008-10-12Repeat actionMay 22, 2009
2005-13-12Repetitively tighten the four eyebolts that attach the front and rear spar of the horizontal stabilizer to the respective stabilizer strut to the specified torque, and repetitively replace at specified intervals any...Air Tractor, Inc. Models AT-300, AT-301, AT-302, AT-400, AT-400A, AT-401, AT-402, AT-602, AT-802, and AT-802A Airplanes · AirplaneRepeat actionJun 22, 2005
2009-18-04Requires installing a rudder-aileron interconnect cable system shield kit and securing any items stowed in the baggage compartment, using tie downs and/or a cargo net until the cable shield kit is installedAir Tractor, Inc. Models AT-802 and AT-802A Airplanes · AirplaneAug 27, 2009
2008-26-01Air Tractor, Inc. Models AT-200, AT-300, AT-400, AT-500, AT-600, and AT-800 Series AirplanesAirplaneSupersedes 2008-11-17Dec 24, 2008
2006-23-14Repetitively visually inspect the rudder and vertical fin hinge attaching structure (vertical fin skins, spars, hinges, and brackets) for loose fasteners, cracks, and/or corrosionAir Tractor, Inc. Models AT-502, AT-502A, AT-502B, AT-602, AT-802, and AT-802A Airplanes · AirplaneNov 16, 2006
2006-20-10Repetitively inspect the attach angles on the firewall mounted hopper rinse tank shelf for damage and/or cracks and replace damaged and/or cracked attach angles with steel attach anglesAir Tractor, Inc. Models AT-802 and AT-802A Airplanes · AirplaneSep 29, 2006
2004-15-15Air Tractor, Inc. Models AT-401, AT-401B, AT-402, AT-402A, AT-402B, AT-501, AT-502, AT-502A, AT-502B, AT-503A, AT-602, AT-802, and AT-802A AirplanesAirplaneSupersedes 2002-19-10Jul 30, 2004
2002-15-06Replace the rudder control cables and fairleads with parts of improved designAir Tractor, Inc. Models AT-802 and AT-802A Airplanes · AirplaneAug 1, 2002
2002-11-05Eddy-current inspect the wing lower spar cap immediately prior to the replacement/modification in order to detect and correct any crack in a bolthole before it extends to the modified center section of the wingAir Tractor, Inc. Models AT-400, AT-401, AT-401B, AT-402, AT-402A, AT-402B, AT-501, AT-802, and AT-802A Airplanes · AirplaneSupersedes 2001-10-04 R1May 31, 2002
97-04-11Air Tractor, Inc. Models AT-802 and AT- 802A AirplanesAirplaneFeb 18, 1997

Listed by the model designations in each AD's text. An AD written for a part number, or for "all" engines of a maker, may name no model and so not appear here: search the library for the part or the maker as well.