Airworthiness Directive · Amendment 39-11194 · International Aero Engines AG V2500-A1 and V2500-A5 Series Turbofan Engines
International Aero Engines AG V2500-A1 and V2500-A5 Series Turbofan Engines
International Aero Engines AG (IAE) V2500-A1 turbofan engines, all serial numbers (S/Ns), and V2500-A5 turbofan engines, with S/Ns V10079 and below, installed on, but not limited to, Airbus Industries A319, A320, and A321 series airplanes.
This amendment adopts a new airworthiness directive (AD) that is applicable to certain International Aero Engines AG (IAE) V2500-A1 and V2500-A5 series turbofan engines. This action requires determining the need for a special borescope inspection of the high pressure turbine (HPT) stage 1 inner rotating airseal (TOBI ID seal) for oil wetting after an in-flight shutdown (IFSD). It also requires, if necessary, the tear down and inspection of HPT hardware. This amendment is prompted by reports of overheat damage to the HPT hardware caused by ignition of oil that leaked into the HPT from the No. 4 bearing compartment during an IFSD. The actions specified in this AD are intended to prevent failure of the HPT hardware due to ignition of oil trapped by the HPT TOBI ID seal, which could result in an uncontained engine failure and damage to the airplane.
