Airworthiness Directive · Amendment 39-11038 · Schweizer Aircraft Corporation Model 269C-1 Helicopters
Schweizer Aircraft Corporation Model 269C-1 Helicopters
Model 269C-1 helicopters with main rotor blades, P/N 269A1185-1, S/N S222, S312, S313, S325, S326, S327, S339, S341, S343, S346, S347, S349 through S367, S369 through S377, S379 through S391, S393, S394, S395, S397, S399, S401 through S417, S419 through S424, S426 through S449, S451 through S507, S509 through S513, S516 through S527, S529 through S540, S542, S544 through S560, S562 through S584, S586 through S595, S597 though S611, S620 through S623, S625, S628, S633, S641 through S644, S646, S653, S658, S664, S665, and S667, installed, certificated in any category.
This amendment adopts a new airworthiness directive (AD), applicable to Schweizer Aircraft Corporation Model 269C-1 helicopters, that requires a visual inspection of the bond line between the main rotor blade (blade) abrasion strip (abrasion strip) and the blade for voids, separation, or lifting of the abrasion strip; a visual inspection of the adhesive bead around the perimeter of the abrasion strip for erosion, cracks, or blisters; a tap (ring) test of the abrasion strip for debonding or hidden corrosion voids; and removal of any blade with an unairworthy abrasion strip and replacement with an airworthy blade. This amendment is prompted by four reports that indicate that debonding and corrosion have occurred on certain blades where the abrasion strip attaches to the blade skin. The actions specified by this AD are intended to prevent loss of the abrasion strip from the blade and subsequent loss of control of the helicopter.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
