Airworthiness Directive · Amendment 39-10275 · Airbus Industrie Model A320 Series Airplanes
Airbus Industrie Model A320 Series Airplanes
Superseded. A later AD replaced this one: AD 2004-01-03. Comply with the one in force.
Model A320 series airplanes on which Airbus Industrie Modification No. 24389 (Airbus Industrie Service Bulletin No. A320-52-1057, dated July 26, 1994) has not been accomplished, certificated in any category.
This amendment adopts a new airworthiness directive (AD), applicable to certain Airbus Industrie Model A320 series airplanes, that requires an inspection to detect moisture and migrated bushings of the guide fittings of the safety locking pins of the passenger doors, removal of any moisture, application of grease, and reinstallation of any migrated bushing. This amendment also requires installation of a greasing nipple on the guide fitting of the locking pin and on three telescopic rods on the passenger doors. This amendment is prompted by reports of difficulty opening the passenger doors due to jamming of the locking pin. The actions specified by this AD are intended to prevent such jamming of the locking pin, which could result in inability to open the passenger door. This condition, if not corrected, could impede or delay passengers from exiting the airplane during an emergency.
