Airworthiness Directive · Amendment 39-10138 · Airbus, AlliedSignal Inc, The Boeing Company Appliances
Airbus, AlliedSignal Inc, The Boeing Company Appliances
This AD applies to Airbus, AlliedSignal Inc, The Boeing Company A300 B2-1A, A300 B2-1C, A300 B2-203, A300 B2K-3C, A300 B4-103, A300 B4-203, A300 B4-2C, A300 B4-601, A300 B4-603, A300 B4-605R, A300 B4-620, A300 B4-622, A300 B4-622R, A300 C4-605R Variant F, A300 F4-605R, A300 F4-622R, Auxiliary Power Units, DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A, KDC-10), DC-10-40, DC-10-40F.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
This amendment supersedes an existing airworthiness directive (AD), applicable to AlliedSignal Inc. (formerly AiResearch and Garrett) TSCP700-4B and -5 Series Auxiliary Power Units (APUs), that currently requires restretching the first stage low pressure compressor (LPC) tie rods, or replacing affected disks at or before 8,000 cycles since new (CSN). This amendment requires removing from service affected disks, replacing them with serviceable parts, and establishing a life limit of 8,000 CSN for affected disks. This amendment is prompted by a report of a first stage LPC disk rim separation due to low cycle fatigue on an APU that had its tie rods restretched in accordance with the current AD. The actions specified by this AD are intended to prevent first stage LPC disk rim separation due to low cycle fatigue, which could result in an uncontained APU failure and damage to the aircraft.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
