Airworthiness Directive · Amendment 39-10102 · Boeing Model 737-100 and -200 Series Airplanes
Boeing Model 737-100 and -200 Series Airplanes
Superseded. A later AD replaced this one: AD 98-26-24. Comply with the one in force.
Model 737-100 and -200 series airplanes equipped with Bendix main wheel assemblies having part number 2601571-1, certificated in any category.
This amendment adopts a new airworthiness directive (AD), applicable to all Boeing Model 737-100 and -200 series airplanes, that requires replacement of certain outboard and inboard wheel halves with improved wheel halves. This amendment also requires cleaning and inspecting certain outboard and inboard wheel halves for corrosion, missing paint in large areas, and cracks; and repair or replacement of the wheel halves with serviceable wheel halves, if necessary. This amendment is prompted by a review of the design of the flight control systems on Model 737 series airplanes. The actions specified by this AD are intended to prevent failure of the wheel flanges, which could result in damage to the hydraulics systems, jammed flight controls, loss of electrical power, or other combinations of failures; and consequent reduced controllability of the airplane.
