Airworthiness Directive · Amendment 39-10103 · RAPCO, Inc. Filter, Part Numbers RA- 1J4-4, RA-1J4-6, and RA-1J4-7 From Lot Numbers 05597, 07797, and 12597
RAPCO, Inc. Filter, Part Numbers RA- 1J4-4, RA-1J4-6, and RA-1J4-7 From Lot Numbers 05597, 07797, and 12597
Filter Part Numbers (P/N) RA-1J4-4, RA-1J4-6, or RA-1J4-7 from Lot Numbers 05597, 07797, or 12597 installed on, but not limited to, the following airplanes, certificated in any category: Manufacturer Model Cessna Aircraft Company (Cessna).......... 310R and T310R. Raytheon Aircraft Company (Raytheon) E33A, F33A, V35A, V35B, 36, (formerly known as Beech Aircraft A36, 58, 65-B80, 70, 95- Corporation). B55, D55, E55. The New Piper Aircraft, Inc. (Piper)...... PA-31-300, PA-31-325, PA- 31P, PA-31P-350, PA-31T, PA- 34-200T.
This document publishes in the Federal Register an amendment adopting Airworthiness Directive (AD) 97-16-10, which was sent previously to owners of airplanes known to have RAPCO, Inc. (RAPCO) in- line pressure filters installed. This AD requires removing RAPCO filters with part numbers (P/N) RA-1J4-4, RA-1J4-6, and RA-1J4-7 that are from Lot Numbers 05597, 07797, and 12597. Recent operator reports and the manufacturer's report of several cracked filter housings on these RAPCO, Inc. in-line pressure filters prompted this AD. The actions specified by this AD are intended to prevent failure of the flight instruments during flight because of a failed in-line pressure filter, which could cause loss of control of the airplane.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
Appliances and equipment