Airworthiness Directive · Amendment 39-9985 · British Aerospace Regional Aircraft Airplanes
British Aerospace Regional Aircraft Airplanes
This AD applies to British Aerospace Regional Aircraft H.P. 137 Jetstream Mk. 1, Jetstream 3201, Jetstream Series 200, Jetstream Series 3101.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
This amendment supersedes Airworthiness Directive (AD) 81-20-01, which currently requires repetitively inspecting the nose landing gear (NLG) actuator support structure and the front pressure bulkhead for cracks on Jetstream Aircraft Limited (JAL) HP137 Mk1 and Jetstream series 200 airplanes, and replacing any cracked part. This AD retains the repetitive inspections required by AD 81-20-01; requires repetitively inspecting the NLG retraction jack upper mounting fitting and attachment hardware for security bolt failure and for bolts with improper torque levels on the HP137 Mk1, Jetstream series 200, and Jetstream Model 3101 airplanes, and requires replacing any failed security bolts and adjusting any bolt with an improper torque level; and requires modifying the NLG retraction jack on all affected airplanes, as terminating action for the repetitive inspections. This AD results from reports of NLG jack mounting fitting failures on several of the affected airplanes, and the Federal Aviation Administration's policy on aging commuter-class aircraft. The actions specified by this AD are intended to prevent failure of the NLG caused by a cracked NLG actuator support structure or cracked front pressure bulkhead, which, if not detected and corrected, could lead to nose gear collapse and damage to the airplane.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
