Airworthiness Directive · Amendment 39-9857 · The Boeing Company Airplanes
The Boeing Company Airplanes
This AD applies to The Boeing Company DC-10-10, DC-10-10F, DC-10-30, DC-10-30F (KC-10A, KDC-10), DC-10-40, DC-10-40F.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
This amendment adopts a new airworthiness directive (AD), applicable to certain McDonnell Douglas Model DC-10-10, -30, and -40 series airplanes, and KC-10 (military) series airplanes, that requires repetitive high frequency eddy current (HFEC) inspections to detect cracks in the number 4 banjo fitting on the rear spar of the vertical stabilizer, and repair and modification of the vertical stabilizer, if necessary. It also requires the installation of a modification as terminating action for the repetitive inspections. This amendment is prompted by reports of failed attach bolts and cracking found in the area of the number 4 banjo fitting, which were caused by higher than normal operating stresses. The actions specified by this AD are intended to prevent reduction in the structural integrity of this fitting due to failed bolts and cracking.
