Airworthiness Directive · Amendment 39-9840 · Raytheon Model BAe 125-800A, Model Hawker 800, and Model Hawker 800XP Series Airplanes
Raytheon Model BAe 125-800A, Model Hawker 800, and Model Hawker 800XP Series Airplanes
Superseded. A later AD replaced this one: AD 2000-08-07. Comply with the one in force.
Model BAe 125-800A series airplanes, Model Hawker 800 series airplanes including Special Variants (C29A, U125, and U125A), and Model Hawker 800XP series airplanes; on which the modification described in Raytheon Service Bulletin SB.54-1-3815B, or a production equivalent, has not been installed; certificated in any category.
This amendment adopts a new airworthiness directive (AD), applicable to certain Raytheon Model BAe 125-800A, Model Hawker 800, and Model Hawker 800XP series airplanes, that requires the filling of two tooling holes on the firewalls of the left and right engine pylons with sealant. This amendment is prompted by notification from the manufacturer that these holes were not sealed during production. The actions specified by this AD are intended to prevent an engine fire from moving to the fuselage and to the lines that carry flammable fluid that are located inboard of the firewall.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
