Airworthiness Directive · Amendment 39-9817 · BAE Systems (Operations) Limited Airplanes
BAE Systems (Operations) Limited Airplanes
This AD applies to BAE Systems (Operations) Limited Jetstream Model 4101.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
This amendment adopts a new airworthiness directive (AD) that is applicable to certain Jetstream Model 4101 airplanes. This action requires a one-time check of the left and right main landing gear leg assemblies to determine whether certain assemblies have been installed; and the replacement of certain discrepant retaining bolts on these assemblies with correctly manufactured bolts. This amendment is prompted by a report indicating that some of these retaining bolts have failed during the assembly and installation of a main landing gear unit, due to an incorrect process that was used during the manufacture of the bolts. The actions specified in this AD are intended to prevent structural damage to the main landing gear due to failure of the retaining bolts which, if not corrected, could result in reduced controllability of the airplane during takeoff, landing, and taxiing.
