Airworthiness Directive · Amendment 39-9748 · B-N Group Ltd. Airplanes
B-N Group Ltd. Airplanes
This AD applies to B-N Group Ltd. BN-2, BN-2A, BN-2A-2, BN-2A-20, BN-2A-21, BN-2A-26, BN-2A-27, BN-2A-3, BN-2A-6, BN-2A-8, BN-2A-9, BN2A MK. III, BN2A MK. III-2, BN2A MK. III-3.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
This amendment supersedes Airworthiness Directive (AD) 75-26-15, which currently requires repetitively inspecting the aileron mass balance clamp unit attachment for looseness on Pilatus Britten-Norman Ltd. (Pilatus Britten-Norman) BN-2A and BN2A MK. 111 series airplanes, and modifying the aileron and mass balance clamp unit if any looseness is found. The Federal Aviation Administration's policy on aging commuter-class aircraft is to eliminate or, in certain instances, reduce the number of certain repetitive short-interval inspections when improved parts or modifications are available. This action retains the repetitive inspections required by AD 75-26-15, and requires modifying the aileron and mass balance unit (at a certain time) as terminating action for the repetitive inspection requirement. The actions specified in this AD are intended to prevent failure of the aileron mass balance attachment, which could result in loss of control of the airplane.
