Airworthiness Directive · Amendment 39-9726 · American Champion Aircraft Corp. Airplanes
American Champion Aircraft Corp. Airplanes
This AD applies to American Champion Aircraft Corp. 7ECA, 7GCAA, 7GCBC, 7KCAB, 8GCBC, 8KCAB.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
This amendment supersedes Airworthiness Directive (AD) 96-03-11, which currently requires the following on American Champion Aircraft Corporation (American Champion) Models 8KCAB, 8GCBC, 7GCBC, and 7ECA airplanes that are equipped with metal spar wings: inspecting (one-time) the wing front strut attach fittings for cracks, scratches, or surface deformities; replacing any wing front strut attach fitting with cracks, scratches, or surface deformities; and reporting the inspection results to the Federal Aviation Administration (FAA). This action results from reports submitted as a requirement of the existing AD that reference 24 fittings with cracks, scratches, or surface deformities on 7 different airplanes, and the FAA's determination that improved wing front strut attach fittings (developed by American Champion) are not susceptible to cracks, scratches, or surface deformities. This action requires installing removable inspection hole covers for the wing front strut attachfittings, and replacing the wing front strut attach fittings with fittings of improved design. The action also provides the provision of repetitively inspecting the wing front strut attach fittings (provided no cracks, scratches, or surface deformities are found) if parts have been ordered but are not available. The actions specified by this AD are intended to prevent structural failure of a wing caused by cracked wing front strut attach fittings, which, if not detected and corrected, could result in loss of control of the airplane.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
