Airworthiness Directive · Amendment 39-9663 · Lockheed Martin Corporation Airplanes
Lockheed Martin Corporation Airplanes
Superseded. A later AD replaced this one: AD 2023-22-06. Comply with the one in force.
This AD applies to Lockheed Martin Corporation 382, 382B, 382E, 382F, 382G.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
This amendment supersedes an existing airworthiness directive (AD), applicable to certain Lockheed Model 382, 382B, 382E, 382F, and 382G series airplanes, that currently requires visual inspections to detect loose, missing, or deformed fasteners in the upper truss mounts of certain engines, inspections to detect cracking in the associated tangs, and replacement of damaged parts. This amendment adds a requirement for repetitive ultrasonic inspections to detect cracking of the upper tangs and replacement of cracked parts. This amendment also provides for an optional terminating action for the repetitive inspections, and revises the applicability of the rule to specify groupings of airplanes. This amendment is prompted by reports indicating that fatigue cracking of the tangs of the upper truss mount has been detected. The actions specified by this AD are intended to prevent multiple failures of the upper truss mounts due to problems associated with fatigue cracking, which could adversely affect the integrity of the engine mount structure. The incorporation by reference of Hercules Service Bulletin 382-71-20, dated March 18, 1994, as listed in the regulations, is approved by the Director of the Federal Register as of July 15, 1996. The incorporation by reference of Lockheed Alert Service Bulletin A382-71-19/A82-687, dated December 23, 1993, as listed in the regulations, was approved previously by the Director of the Federal Register as of February 18, 1994 (59 FR 5078, February 3, 1994).
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
