Airworthiness Directive · Amendment 39-9211 · McCauley Propeller Systems Propellers
McCauley Propeller Systems Propellers
This AD applies to McCauley Propeller Systems 2A37C.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
This amendment adopts a new airworthiness directive (AD) that is applicable to McCauley Model 2A37C223/90RB propellers. This action requires installation of internal steel components, replacement of a balance ring, replacement of cylinder mounting screws, and modification to an oil-filled configuration with red dye. Replacement of the identified components redistributes propeller weight while the red dye oil-filling provides an "on-condition" (in-service) means of early crack detection of the propeller assembly and also improves lubrication and corrosion protection. Any screw failures or cracks found during the accomplishment of this AD must be reported to the FAA. This amendment is prompted by a report of a propeller found with at least one cylinder screw that had failed due to fatigue. The actions specified in this AD are intended to prevent cylinder screw failure that could result in loss of propeller control and subsequent loss of aircraft control.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Propellers
