Airworthiness Directive · Amendment 39-9037 · Pratt & Whitney Division Engines
Pratt & Whitney Division Engines
This AD applies to Pratt & Whitney Division JT8D-15A, JT8D-17A, JT8D-17AR.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
This amendment supersedes an existing airworthiness directive (AD), applicable to certain Pratt & Whitney (PW) JT8D series turbofan engines, that currently requires initial and repetitive inspections of installed third and fourth stage low pressure turbine (LPT) blade sets for blade shroud crossnotch wear, and removal of blade sets found with excessively worn blade shroud crossnotches. This amendment continues to require inspections, and removal, if necessary, of blade sets, but also requires, as a terminating action to the inspections: installation of improved LPT containment hardware, installation of an improved No. 6 bearing scavenge pump bracket bushing, and modification and remarking with a new identification number third and fourth stage LPT vanes with a reduced platform leading edge dimension. This amendment is prompted by reports of additional uncontained engine failures since publication of the current AD, and the availability of improved LPT containment hardware.The actions specified by this AD are intended to prevent damage to the aircraft resulting from engine debris following an LPT blade or shaft failure.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
