Airworthiness Directive · Amendment 39-23515 · Reciprocating engine cylinder section
Lycoming Engines
Quoted from the FAA's summary of this AD. The full text below is what applies.
This AD requires replacement of the affected piston pin with a part eligible for installation and, for certain engines, oil change and visual inspection of the engine oil filter, oil pressure screen, and oil suction screen for metal particulates.
This AD also prohibits the installation of an affected piston pin on any engine.
Does it apply to your aircraft?
Enter an N-number to see every AD that names its model. Serial numbers and installed parts still decide.
This AD applies to Lycoming Engines (Lycoming) Model engines identified in table 1 to paragraph (c) of this AD with an installed piston pin having part number (P/N) LW-13445 that was manufactured between January 7, 2021 to December 15, 2025. If the date of manufacture for the piston pin cannot be determined, this AD is applicable. If the current piston pins (P/N LW-13445) were installed prior to January 7, 2021, this AD is not applicable.
| Engine series | Engine model |
|---|---|
| O-235 | -C1, -C1A, -C1B, -C1C, -C2A, -C2B, -C2C, -E1, -E1B, -E2A, -E2B, -F1, -F1B, -F2A, -F2B, -G1, -G1B, -G2A, -G2B, -H2C, -J2A, -J2B, -K2A, -K2B, -K2C, -L2A, -L2C, -M1, -M2C, -M3C, -N2A, -N2C, -P1, -P2A, -P2C, -P3C. |
| O-320 | -A1A, -A1B, -A2A, -A2B, -A2C, -A2D, -A3A, -A3B, -A3C, -B1A, -B1B, -B2A, -B2B, -B2C, -B2D, -B2E, -B3A, -B3B, -B3C, -D1A, -D1B, -D1C, -D1D, -D1F, -D2A, -D2B, -D2C, -D2F, -D2J, -D3G, -E1A, -E1B, -E1C, -E1F, -E1J, -E2A, -E2B, -E2C, -E2D, -E2F, -E2G, -E2H, -E3D, -E3H. |
| IO-320 | -B1A, -B1C, -B1D, -B1E, -B2A, -C1A,-C1B, -D1A, -D1B, -D1C, -E1A, -E1B, -E2A,-E2B. |
| AIO-320 | -A1B, -B1B, -C1B. |
| LIO-320 | -B1A, -C1A. |
| AEIO-320 | -D1B, -D2B, -E1A, -E1B, -E2A, -E2B. |
| VO-435 | -A1A (O-435-21), -A1B (O-435-6), -A1C (O-435-23, -23A, -23B, -23C), -A1D (O-435-6A), -A1E, -A1F, -B1A. |
| TVO-435 | -A1A, -B1A (O-435-25A), -B1B, -C1A, -D1A, -D1B, -E1A, -F1A, -G1A, -G1B. |
| O-540 | -J1A5D, -J1B5D, -J1C5D, -J1D5D, -J2A5D, -J2B5D, -J2C5D, -J2D5D, -J3A5, -J3A5D, -J3C5D, -L3C5D. |
| IO-540 | -AB1A5, -J4A5, -W1A5, -W1A5D, -W3A5D. |
The FAA is superseding Airworthiness Directive (AD) 2026-17- 10, which applied to Lycoming Engines (Lycoming) Model O-235, O-540, and IO-540 engines with a certain piston pin installed. AD 2026-17-10 required replacement of the affected piston pin with a part eligible for installation and, for certain engines, oil change and visual inspection of the engine oil filter, oil pressure screen, and oil suction screen for metal particulates. AD 2026-17-10 also prohibited the installation of an affected piston pin on any engine. Since the FAA issued AD 2026-17-10, the manufacturer has identified additional Lycoming Model engines that are subject to the unsafe condition, and the FAA determined the need to clarify the definition for an "affected piston pin," and include corrective action for engine models that were not listed in the manufacturer's service material. This AD requires replacement of the affected piston pin with a part eligible for installation and, for certain engines, oil change and visual inspection of the engine oil filter, oil pressure screen, and oil suction screen for metal particulates. This AD also prohibits the installation of an affected piston pin on any engine. This AD also expands the applicability to include additional affected engines with a certain piston pin installed. The FAA is issuing this AD to address the unsafe condition on these products.
(1) For the purpose of this AD, a “part eligible for installation” is one of the following:
(i) A piston pin that does not have P/N LW-13445.
(ii) A piston pin having P/N LW-13445 that was not manufactured between January 7, 2021 to December 15, 2025.
(2) For the purpose of this AD, an “affected piston pin” is a piston pin having P/N LW-13445 and one of the following:
(i) A date of manufacture between January 7, 2021 to December 15, 2025.
(ii) A date of manufacture that is unknown.
(3) For the purpose of this AD, Group 1 engines are all affected engines, except engines with an installed piston pin having P/N LW-13445 with a manufacture date between March 23, 2023 to December 15, 2025, or an installed piston pin having P/N LW-13445 with a manufacture date that is unknown.
(4) For the purpose of this AD, Group 2 engines are engines with an installed piston pin having P/N LW-13445 with a manufacture date between March 23, 2023 to December 15, 2025, or an installed piston pin having P/N LW-13445 with a manufacture date that is unknown.
(1) For Group 1 and Group 2 engines, except for Group 2 engines with greater than or equal to 150 hours time in service (TIS) as of the effective date of this AD, within 5 hours TIS after the effective date of this AD, perform an oil change and visual inspection of the engine oil filter, oil pressure screen, and oil suction screen for metal particulates.
Note 1 to paragraph (h)(1): Guidance for engine oil filter, oil pressure screen, and oil suction screen inspection instructions and identification of metallic solids may be found in Lycoming Mandatory Service Bulletin No. (MSB) No. 480F, dated May 25, 2017.
(2) If any metal particulates are found during the oil change and inspection required by paragraph (h)(1) of this AD, before further flight, replace any affected piston pin with a part eligible for installation in accordance with the Required Action of Lycoming MSB 667A, dated March 12, 2026 (Lycoming MSB 667A), as applicable to engine model.
(3) For Group 1 engines with an installed piston pin with a manufacture date between January 07, 2021, to March 22, 2023, where metal particulates were not found during the oil change and inspection required by paragraph (h)(1) of this AD, at the next maintenance event requiring the removal of a cylinder assembly with an affected piston pin, or at the next engine overhaul not to exceed the time between overhaul specified in Lycoming Service Instruction No. 1009BF, dated July 20, 2026, whichever occurs first after the effective date of this AD, replace any affected piston pin with a part eligible for installation in accordance with the Required Action of Lycoming MSB 667A, as applicable to engine model.
(4) For Group 2 engines with greater than or equal to 150 hours TIS as of the effective date of this AD, before further flight, replace any affected piston pin with a part eligible for installation in accordance with the Required Action of Lycoming MSB 667A, as applicable to engine model.
(5) For Group 2 engines with less than 150 hours TIS as of the effective date of this AD, within 25 hours TIS after the effective date of this AD but before or upon reaching 150 total hours TIS since installation of the affected piston pins, whichever comes first after the effective date of this AD, replace any affected piston pin with a part eligible for installation in accordance with the Required Action of Lycoming MSB 667A, as applicable to engine model.
After the effective date of this AD, do not install an affected piston pin as defined in paragraph (g)(2) of this AD on any engine.
Although the service material specifies returning certain parts to the manufacturer, this AD does not include those requirements.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.