Airworthiness Directive · Amendment 39-23509 · Turbine section
Rolls-Royce Deutschland Ltd & Co KG Engines
Quoted from the FAA's summary of this AD. The full text below is what applies.
This AD requires revising the ALS of the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive instructions and associated thresholds and intervals for life-limited parts.
All Rolls-Royce Deutschland Ltd & Co KG (RRD) Model BR700-725A1-12 engines. Serial numbers and exceptions
Does it apply to your aircraft?
Enter an N-number to see every AD that names its model. Serial numbers and installed parts still decide.
This AD applies to all Rolls-Royce Deutschland Ltd & Co KG Model BR700-725A1-12 engines.
The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model BR700-725A1-12 engines. This AD was prompted by the manufacturer revising the airworthiness limitations section (ALS) of the existing time limits manual (TLM) to introduce new or more restrictive airworthiness limitations and associated thresholds and intervals for life-limited parts. This AD requires revising the ALS of the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive instructions and associated thresholds and intervals for life-limited parts. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Perform all required actions within the compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2024-0136, dated July 11, 2024 (AD 2024-0136).
(1) Where EASA AD 2024-0136 requires compliance from its effective date, this AD requires using the effective date of this AD.
(2) This AD does not require compliance with paragraphs (1), (2), (4), and (5) of EASA AD 2024-0136.
(3) Where paragraph (3) of EASA AD 2024-0136 specifies “Within 12 months after the effective date of this AD, revise the approved AMP,” replace that text with “Within 30 days after the effective date of this AD, revise the airworthiness limitations section of the existing approved engine maintenance or inspection program, as applicable”.
(4) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2024-0136 is on or before the applicable “limitations” and “associated thresholds” as incorporated by the requirements of paragraph (3) of EASA AD 2024-0136 or within 30 days after the effective date of this AD, whichever occurs later.
(5) This AD does not adopt the “Remarks” section of EASA AD 2024-0136.
No alternative actions and associated thresholds and intervals, including life limits, are allowed for compliance with paragraph (g) of this AD unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2024-0136.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Engines