Airworthiness Directive · Amendment 39-23501 · Equipment/furnishings
The Boeing Company Airplanes
Quoted from the FAA's summary of this AD. The full text below is what applies.
This AD requires replacing PSU-mounted video monitors that do not have secondary retention lanyards.
Certain The Boeing Company Model 757-200 and -300 series airplanes. Serial numbers and exceptions
Does it apply to your aircraft?
Enter an N-number to see every AD that names its model. Serial numbers and installed parts still decide.
This AD applies to The Boeing Company Model 757-200 and -300 series airplanes, certificated in any category, equipped with passenger service unit (PSU)-mounted video monitors.
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200 and -300 series airplanes. This AD was prompted by a report that some passenger service unit (PSU)-mounted video monitors became detached from the PSU rails during a hard landing. This AD requires replacing PSU-mounted video monitors that do not have secondary retention lanyards. The FAA is issuing this AD to address the unsafe condition on these products.
(1) For airplanes identified in Boeing Special Attention Requirements Bulletin 757-25-0320 RB, Revision 1, dated August 6, 2025: Except as specified by paragraph (h) of this AD, at the applicable times specified in the “Compliance” paragraph of Boeing Special Attention Requirements Bulletin 757-25-0320 RB, Revision 1, dated August 6, 2025, do all applicable actions identified in, and in accordance with, the Accomplishment Instructions of Boeing Special Attention Requirements Bulletin 757-25-0320 RB, Revision 1, dated August 6, 2025.
Note 1 to paragraph (g)(1): Guidance for accomplishing the actions required by paragraph (g)(1) of this AD can be found in Boeing Special Attention Service Bulletin 757-25-0320, Revision 1, dated August 6, 2025, which is referred to in Boeing Special Attention Requirements Bulletin 757-25-0320 RB, Revision 1, dated August 6, 2025.
(2) For airplanes identified in Boeing Special Attention Requirements Bulletin 757-25-0321 RB, Revision 1, dated August 6, 2025: Except as specified by paragraph (h) of this AD, at the applicable times specified in the “Compliance” paragraph of Boeing Special Attention Requirements Bulletin 757-25-0321 RB, Revision 1, August 6, 2025, do all applicable actions identified in, and in accordance with, the Accomplishment Instructions of Boeing Special Attention Requirements Bulletin 757-25-0321 RB, Revision 1, dated August 6, 2025.
Note 2 to paragraph (g)(2): Guidance for accomplishing the actions required by paragraph (g)(2) of this AD can be found in Boeing Special Attention Service Bulletin 757-25-0321, Revision 1, dated August 6, 2025, which is referred to in Boeing Special Attention Requirements Bulletin 757-25-0321 RB, Revision 1, dated August 6, 2025.
(3) For airplanes not identified in paragraph (g)(1) or (2) of this AD: Within 60 months after the effective date of this AD, replace all PSU-mounted video monitors that do not have secondary retention lanyards with PSU-mounted video monitors that have secondary retention lanyards, using a method approved in accordance with the procedures specified in paragraph (j) of this AD.
(1) Where the Compliance Time columns of the tables in the “Compliance” paragraph of Boeing Special Attention Requirements Bulletin 757-25-0320 RB, Revision 1, dated August 6, 2025, refer to the original issue date of Requirements Bulletin 757-25-0320 RB, this AD requires using the effective date of this AD.
(2) Where the Compliance Time columns of the tables in the “Compliance” paragraph of Boeing Special Attention Requirements Bulletin 757-25-0321 RB, Revision 1, dated August 6, 2025, refer to the original issue date of Requirements Bulletin 757-25-0321 RB, this AD requires using the effective date of this AD.
(3) Where Boeing Special Attention Requirements Bulletins 757-25-0320 RB, Revision 1, and 757-25-0321 RB, Revision 1, both dated August 6, 2025, specify contacting Boeing for alternative installation instructions and doing the installation, this AD requires doing the installation using a method approved in accordance with the procedures specified in paragraph (j) of this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft