Airworthiness Directive · Amendment 39-23151 · Landing gear
The Boeing Company Airplanes
This AD applies to The Boeing Company Model 757-200, -200PF, and -200CB series airplanes, certificated in any category.
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 757-200, -200PF, and -200CB series airplanes. This AD was prompted by a report of improper grinding of the inner diameter of the main landing gear (MLG) outer cylinders, resulting in possible heat damage to the outer cylinders. This AD requires a records check or inspection to determine if an affected outer cylinder is installed and replacing all affected outer cylinders. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified by paragraph (h) of this AD: At the applicable times specified in the “Compliance” paragraph of Boeing Alert Requirements Bulletin 757-32A0216 RB, dated January 26, 2024, do all applicable actions identified in, and in accordance with, the Accomplishment Instructions of Boeing Alert Requirements Bulletin 757-32A0216 RB, dated January 26, 2024.
Note 1 to paragraph (g): Guidance for accomplishing the actions required by this AD can be found in Boeing Alert Service Bulletin 757-32A0216, dated January 26, 2024, which is referred to in Boeing Alert Requirements Bulletin 757-32A0216 RB, dated January 26, 2024.
Where the “Boeing Recommended Compliance Time” column in the table under the “Compliance” paragraph of Boeing Alert Requirements Bulletin 757-32A0216 RB, dated January 26, 2024, refers to the original issue date of Boeing Alert Requirements Bulletin 757-32A0216 RB, this AD requires using the effective date of this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
