Airworthiness Directive · Amendment 39-22969 · Navigation
Bombardier, Inc., Airplanes
This AD applies to all Bombardier, Inc., Model BD-700-2A12 airplanes.
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by the discovery that a partial loss of thrust after an engine failure during a required navigation performance authorization required (RNP- AR) approach under certain weight, altitude and temperature (WAT) conditions, may lead to a descent below the specified path guidance. This AD requires a revision to the existing airplane flight manual (AFM), to incorporate updated WAT tables for RNP-AR approach operations. The FAA is issuing this AD to address the unsafe condition on these products.
Within 30 days after the effective date of this AD, revise the existing AFM to include the information specified in (Bombardier) Global 7500 Airplane Flight Manual Temporary Revision TR-58, dated March 21, 2024.
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the International Validation Branch, send it to the attention of the person identified in paragraph (i) of this AD and email to: AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or Transport Canada; or Bombardier, Inc.'s, Transport Canada Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature.
For more information about this AD, contact Joseph Catanzaro, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516-228-7300; email: 9-avs-nyaco-cos@faa.gov.
