Airworthiness Directive · Amendment 39-22865 · Fuel
Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.) Airplanes
This AD applies to Embraer S.A. (Type Certificate previously held by Yaborã Indústria Aeronáutica S.A.) Model ERJ 190-100 IGW, -100 LR, -100 STD, -200 IGW, -200 LR, and -200 STD airplanes, certificated in any category, as identified in Agência Nacional de Aviação Civil (ANAC) AD 2023-11-02, effective November 21, 2023 (ANAC AD 2023-11-02).
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 190-100 STD, -100 LR, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes. This AD was prompted by a manufacturing quality escape concerning certain overheat detection system (ODS) sensing elements. This AD requires inspecting the ODS sensing elements and performing applicable corrective actions, and prohibits the installation of affected parts, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraphs (h) and (i) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, ANAC AD 2023-11-02.
(1) Where ANAC AD 2023-11-02 refers to its effective date, this AD requires using the effective date of this AD.
(2) Where paragraph (b)(1) of ANAC AD 2023-11-02 specifies “Within 5,000 Flight Hours (FH) or 24 months,” for this AD, replace that text with “Within 7,500 Flight Hours (FH) or 36 months.”
(3) Where paragraphs (c)(1), (d)(1), (e)(1), (f)(1), and (g)(1) of ANAC AD 2023-11-02 specify “Within 5,000 FH or 24 months,” for this AD, replace that text with “Within 7,500 FH or 36 months.”
(4) Where paragraphs (b)(1), (c)(1), (d)(1), (e)(1), (f)(1), and (g)(1) of ANAC AD 2023-11-02 specify to inspect ODS sensing elements at various locations, this AD requires adding “in accordance with Embraer Service Bulletin 190-36-0027, Revision 02, dated September 5, 2023; or later revisions approved by ANAC.”
(5) Where paragraphs (b) through (h) of ANAC AD 2023-11-02 specify on-condition actions based on the results of the ODS sensing element inspections required by paragraphs (b)(1), (c)(1), (d)(1), (e)(1), (f)(1), and (g)(1) of ANAC AD 2023-11-02, this AD requires performing all applicable on-condition actions before further flight after each inspection.
(6) This AD does not adopt paragraph (k) of ANAC AD 2023-11-02.
(7) Where paragraph (l) of ANAC AD 2023-11-02 specifies “Record compliance with this [ANAC] AD in the applicable maintenance log book,” for this AD, record compliance with this FAA AD.
Although the material referenced in ANAC AD 2023-11-02 specifies to send removed parts to the manufacturer, this AD does not include that requirement.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
