Airworthiness Directive · Amendment 39-22844 · Time limits/maintenance checks
ATR-GIE Avions de Transport Régional Airplanes
This AD applies to ATR-GIE Avions de Transport Régional Model ATR42-500 airplanes, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness issued on or before October 16, 2023.
The FAA is superseding Airworthiness Directive (AD) 2023-02- 08, which applied to certain ATR-GIE Avions de Transport R[eacute]gional Model ATR42-500 airplanes. AD 2023-02-08 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-02-08, and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This paragraph restates the requirements of paragraph (j) of AD 2023-02-08, with a new terminating action. For airplanes with an original airworthiness certificate or original export certificate of airworthiness dated on or before July 29, 2022: Except as specified in paragraph (h) of this AD, comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2022-0200, dated September 26, 2022 (EASA AD 2022-0200). Accomplishing the revision of the existing maintenance or inspection program required by paragraph (j) of this AD terminates the requirements of this paragraph.
This paragraph restates the exceptions specified in paragraph (k) of AD 2023-02-08, with no changes.
(1) The requirements specified in paragraphs (1) and (2) of EASA AD 2022-0200 do not apply to this AD.
(2) Paragraph (3) of EASA AD 2022-0200 specifies revising “the approved AMP” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after March 14, 2023 (the effective date of AD 2023-02-08).
(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2022-0200 is at the applicable “limitations” and “associated thresholds” as incorporated by the requirements of paragraph (3) of EASA AD 2022-0200, or within 90 days after March 14, 2023 (the effective date of AD 2023-02-08), whichever occurs later.
(4) The provisions specified in paragraphs (4) and (5) of EASA AD 2022-0200 do not apply to this AD.
(5) The “Remarks” section of EASA AD 2022-0200 does not apply to this AD.
This paragraph restates the requirements of paragraph (l) of AD 2023-02-08, with a new exception. Except as required by paragraph (j) of this AD, after the maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections), intervals, and CDCCLs are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2022-0200.
Except as specified in paragraph (k) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2024-0052, dated February 23, 2024 (EASA AD 2024-0052). Accomplishing the revision of the existing maintenance or inspection program required by this paragraph terminates the requirements of paragraph (g) of this AD.
(1) This AD does not adopt the requirements specified in paragraphs (1) and (2) of EASA AD 2024-0052.
(2) Paragraph (3) of EASA AD 2024-0052 specifies revising “the approved AMP,” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after the effective date of this AD.
(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2024-0052 is at the applicable “limitations” and “associated thresholds” as incorporated by the requirements of paragraph (3) of EASA AD 2024-0052, or within 90 days after the effective date of this AD, whichever occurs later.
(4) This AD does not adopt the provisions specified in paragraphs (4) and (5) of EASA AD 2024-0052.
(5) This AD does not adopt the “Remarks” section of EASA AD 2024-0052.
After the existing maintenance or inspection program has been revised as required by paragraph (j) of this AD, no alternative actions (e.g., inspections), intervals, and CDCCLs are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2024-0052.
For Model ATR42-500 airplanes only: Accomplishing the actions required by this AD terminates the corresponding requirements of AD 2020-26-17 for the tasks identified in the service information referenced in EASA AD 2024-0052 only.
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the International Validation Branch, send it to the attention of the person identified in paragraph (o) of this AD and email to: AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or EASA; or ATR-GIE Avions de Transport Régional's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.
For more information about this AD, contact Shahram Daneshmandi, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 206-231-3220; email: Shahram.Daneshmandi@faa.gov.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
