Airworthiness Directive · Amendment 39-22840 · Engine exhaust
Bombardier, Inc., Airplanes
This AD applies to Bombardier, Inc., Model BD-700-2A12 airplanes, certificated in any category, serial numbers 70007, 70008, 70010, 70012 through 70047 inclusive, 70049, 70051, 70052, 70053, 70055 through 70077 inclusive, 70079, 70080, 70081, 70083 through 70133 inclusive, 70135, 70136, 70137, 70138, 70142 through 70148 inclusive, 70150, 70152, and 70158.
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by reports that the pivot door pressure seals on the thrust reverser fixed structure were found disbonded or missing on several airplanes. This AD requires inspecting the pivot door pressure seals and accomplishing applicable corrective actions. This AD also requires a functional test of the thrust reversers. The FAA is issuing this AD to address the unsafe condition on these products.
(1) Within 750 flight hours or 18 months, whichever comes first from the effective date of this AD, perform a general visual inspection for discrepancies (missing, damaged, or disbonding) of the 4 pivot door pressure seals on the thrust reverser door of each engine, and perform a bonding check as applicable, and repair or replace each discrepant seal as applicable, in accordance with Part 2.B of the Accomplishment Instructions of Bombardier Service Bulletin 700-78-7501, Revision 01, dated July 13, 2023. Applicable corrective actions must be done before further flight.
(2) Before further flight after accomplishing the actions specified in paragraph (g)(1) of this AD: Perform a functional test of the thrust reverser in accordance with Part 2.C of the Accomplishment Instructions of Bombardier Service Bulletin 700-78-7501, Revision 01, dated July 13, 2023.
